Intel H55 and em0

[Jack Vogel]

The device subfamily on those motherboards is called PCH, and its only in
the em driver as of
last December, The CVS delta of if_em is 1.27. You can either update to
STABLE/8 or CURRENT.
If you wish to just pull the e1000 driver directory it should work fine in
8.0 RELEASE also.

Cheers,

Jack


On Wed, Mar 31, 2010 at 11:29 PM, David Ehrmann <ehrmann at gmail.com> wrote:

> I recently picked up a H55-based motherboard, and the ethernet interface
> isn't autodetected.  dmesg lists it as the following:
>
> pci0: <network, ethernet> at device 25.0 (no driver attached)
>
> And pciconf lists this:
>
> none1 at pci0:0:25:0:      class=0x020000 card=0x00008086 chip=0x10ef8086
> rev=0x06 hdr=0x00
>   vendor     = 'Intel Corporation'
>   class      = network
>   subclass   = ethernet
>
>
> I'm actually not sure it's an em device, but it's definitely gigabit, and
> googling suggests that others have recently run into the same issue.
>
> Since I'll probably have to recompile, is this currently working in recent
> builds of 8.0?  This was just a vanilla 8.0 release image.  Would some
> simple change tell the driver to recognize this card?
>
> Thanks in advance.
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>