Elsa MicroLink 56k USB is not picked up by umodem

[Stefan Bethke]

Just dug out my sturdy old Elsa modem, and the new USB stack does not  
recognize it anymore. Is that intentional, or did the device IDs just  
dropped between the cracks on the conversion to the new USB stack?


# dmesg
...
ugen0.3: <vendor 0x05cc> at usbus0
# usbconfig list
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL  
(12Mbps) pwr=ON
ugen1.1: <EHCI root HUB (0x15ad)> at usbus1, cfg=0 md=HOST spd=HIGH  
(480Mbps) pwr=ON
ugen0.2: <product 0x0002 vendor 0x0e0f> at usbus0, cfg=0 md=HOST  
spd=FULL (12Mbps) pwr=SAVE
ugen0.3: <product 0x2265 vendor 0x05cc> at usbus0, cfg=0 md=HOST  
spd=FULL (12Mbps) pwr=ON


7-stable sees this:
# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),  
Intel(0x0000), rev 1.00
  port 1 addr 3: full speed, power 400 mA, config 2, ELSA Modem  
Board(0x2265), Lucent Technologies, Inc.(0x05cc), rev 1.00
...
# dmesg
...
ucom0: <Lucent Technologies, Inc. ELSA Modem Board, class 2/0, rev  
1.00/1.00, addr 3> on uhub0
ucom0: iclass 2/2
ucom0: data interface 1, has CM over data, has break
ucom0: status change notification available


Stefan

-- 
Stefan Bethke <stb at lassitu.de>   Fon +49 151 14070811