Intel X58 eSATA port ?

[Mike Tancsa]

At 05:50 AM 3/21/2009, Alexander Motin wrote:
>Mike Tancsa wrote:
>>Has anyone been able to get this port working ? The BIOS sees the 
>>disk, but the driver does not
>
>I would recommend you to start from switching SATA from legacy 
>emulation into native AHCI mode in BIOS.
>
>If it does not succeed, try verbose dmesg, it will give some more 
>info about drive detection process on AHCI.

Hi,
         I turned it on, but still no luck. Attached is the verbose 
dmesg.boot.  I wonder if the extra controller is being mis-identified 
as being PATA ? As far as I can tell, there are no legacy PATA 
connectors on the board

Yet
atapci0: <Marvell 88SX6121 UDMA133 controller> port 
0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f 
mem 0xe1100000-0xe11003ff irq 16 at device 0.0 on pci6

implies its a PATA device ?

         ---Mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dmesg.boot
Type: application/octet-stream
Size: 46906 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20090321/4d45d747/dmesg.obj