SiI3531 SATA port multipler
Nick Hilliard
nick-lists at netability.ie
Thu Mar 12 04:27:15 PDT 2009
On 12/03/2009 08:51, Alexander Motin wrote:
> Have you tried to enable verbose boot messages? It may give some
> additional info.
Yep, tried it, but the dmesg buffer filled up with stuff like this:
> ata2: siiprb_issue_cmd time=0ms status=00050000
> ata2: siiprb_issue_cmd time=0ms status=00010000
> ata2: siiprb_issue_cmd time=0ms status=00010000
> ata2: p0: connect status=00000000
> ata2: siiprb_issue_cmd time=0ms status=00010000
> ata2: siiprb_issue_cmd time=0ms status=00010000
> ata2: siiprb_issue_cmd time=27ms status=00010000
> ata2: p1: SIGNATURE=00000101
> ata2: siiprb_issue_cmd time=0ms status=00010000
and so on - probably about 50-100k of this sort of thing. So I have no
idea what happened at the start of the card initialisation process.
> Can you try to use AHCI controller present in your system instead of
> SiI? It may allow to differentiate SiI controller related problems from
> PM related ones.
I don't have a sata->esata cable handy. However, I replaced the SiI3531
with a JMB366 card, and have attached the results of a verbose boot.
> I am expecting to receive some PM hardware in a week or so, so I will be
> able to test it's support, at least with AHCI.
Oh cool. Would you like remote access to my box, btw? I might also be
able to dig out an rs232 card somewhere for debugging.
Nick
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #5: Wed Mar 11 22:11:15 GMT 2009
nick at pancake.internal.acquirer.com:/usr/src/sys/amd64/compile/PANCAKE
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8086d000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3010047111 Hz
CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (3010.05-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Cores per package: 2
usable memory = 8580993024 (8183 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000098fff, 622592 bytes (152 pages)
0x000000000089f000 - 0x00000000cff7ffff, 3480096768 bytes (849633 pages)
0x0000000100000000 - 0x0000000220a33fff, 4842536960 bytes (1182260 pages)
avail memory = 8285020160 (7901 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP @ 0x0xfbbe0/0x0024 (v 2 ACPIAM)
ACPI: XSDT @ 0x0xcff80100/0x005C (v 1 A_M_I_ OEMXSDT 0x11000820 MSFT 0x00000097)
ACPI: FACP @ 0x0xcff80290/0x00F4 (v 3 A_M_I_ OEMFACP 0x11000820 MSFT 0x00000097)
ACPI: DSDT @ 0x0xcff80440/0x8527 (v 1 A1121 A1121001 0x00000001 INTL 0x20051117)
ACPI: FACS @ 0x0xcff8e000/0x0040
ACPI: APIC @ 0x0xcff80390/0x006C (v 1 A_M_I_ OEMAPIC 0x11000820 MSFT 0x00000097)
ACPI: MCFG @ 0x0xcff80400/0x003C (v 1 A_M_I_ OEMMCFG 0x11000820 MSFT 0x00000097)
ACPI: OEMB @ 0x0xcff8e040/0x0081 (v 1 A_M_I_ AMI_OEM 0x11000820 MSFT 0x00000097)
ACPI: HPET @ 0x0xcff88970/0x0038 (v 1 A_M_I_ OEMHPET 0x11000820 MSFT 0x00000097)
ACPI: OSFR @ 0x0xcff889b0/0x00B0 (v 1 A_M_I_ OEMOSFR 0x11000820 MSFT 0x00000097)
ACPI: SSDT @ 0x0xcff8e5d0/0x0A7C (v 1 DpgPmm CpuPm 0x00000012 INTL 0x20051117)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00000400
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
acpi0: <A_M_I_ OEMXSDT> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 15 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 14 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2e20, revid=0x03
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2e21, revid=0x03
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a37, revid=0x00
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0xa800, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a38, revid=0x00
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=14
map[20]: type I/O Port, range 32, base 0xa880, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x3a39, revid=0x00
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[20]: type I/O Port, range 32, base 0xac00, size 5, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3c, revid=0x00
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf7fffc00, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3e, revid=0x00
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf7ff8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x3a40, revid=0x00
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a42, revid=0x00
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a48, revid=0x00
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a4a, revid=0x00
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a34, revid=0x00
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0xa080, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x3a35, revid=0x00
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type I/O Port, range 32, base 0xa400, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a36, revid=0x00
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[20]: type I/O Port, range 32, base 0xa480, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3a, revid=0x00
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf7fff800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x90
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a18, revid=0x00
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a22, revid=0x00
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 16 messages
map[10]: type I/O Port, range 32, base 0x9c00, size 3, enabled
map[14]: type I/O Port, range 32, base 0x9880, size 2, enabled
map[18]: type I/O Port, range 32, base 0x9800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x9480, size 2, enabled
map[20]: type I/O Port, range 32, base 0x9400, size 5, enabled
map[24]: type Memory, range 32, base 0xf7ffe800, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a30, revid=0x00
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[10]: type Memory, range 64, base 0xf7fff400, size 8, enabled
map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf8000000-0xfe7fffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0141, revid=0xa2
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xf8000000, size 26, enabled
pcib1: requested memory range 0xf8000000-0xfbffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[1c]: type Memory, range 64, base 0xfd000000, size 24, enabled
pcib1: requested memory range 0xfd000000-0xfdffffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff,0xd0000000-0xdfffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1
pci0: <serial bus, USB> at device 26.0 (no driver attached)
pci0: <serial bus, USB> at device 26.1 (no driver attached)
pci0: <serial bus, USB> at device 26.2 (no driver attached)
pci0: <serial bus, USB> at device 26.7 (no driver attached)
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 5
pcib2: subordinate bus 5
pcib2: I/O decode 0xe000-0xefff
pcib2: memory decode 0xfeb00000-0xfebfffff
pcib2: no prefetched decode
pci5: <ACPI PCI bus> on pcib2
pci5: domain=0, physical bus=5
found-> vendor=0x8086, dev=0x10b9, revid=0x06
domain=0, bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfebe0000, size 17, enabled
pcib2: requested memory range 0xfebe0000-0xfebfffff: good
map[14]: type Memory, range 32, base 0xfebc0000, size 17, enabled
pcib2: requested memory range 0xfebc0000-0xfebdffff: good
map[18]: type I/O Port, range 32, base 0xec00, size 5, enabled
pcib2: requested I/O range 0xec00-0xec1f: in range
pcib2: matched entry for 5.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 16 at device 0.0 on pci5
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000
em0: attempting to allocate 1 MSI vectors (1 supported)
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
msi: Assigning MSI IRQ 256 to local APIC 0 vector 49
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:1b:21:32:1a:9e
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib3: domain 0
pcib3: secondary bus 4
pcib3: subordinate bus 4
pcib3: I/O decode 0xd000-0xdfff
pcib3: memory decode 0xfea00000-0xfeafffff
pcib3: no prefetched decode
pci4: <ACPI PCI bus> on pcib3
pci4: domain=0, physical bus=4
found-> vendor=0x197b, dev=0x2366, revid=0x02
domain=0, bus=4, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xdc00, size 3, enabled
pcib3: requested I/O range 0xdc00-0xdc07: in range
map[14]: type I/O Port, range 32, base 0xd880, size 2, enabled
pcib3: requested I/O range 0xd880-0xd883: in range
map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled
pcib3: requested I/O range 0xd800-0xd807: in range
map[1c]: type I/O Port, range 32, base 0xd480, size 2, enabled
pcib3: requested I/O range 0xd480-0xd483: in range
map[20]: type I/O Port, range 32, base 0xd400, size 4, enabled
pcib3: requested I/O range 0xd400-0xd40f: in range
map[24]: type Memory, range 32, base 0xfeafe000, size 13, enabled
pcib3: requested memory range 0xfeafe000-0xfeafffff: good
pcib3: matched entry for 4.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
atapci0: <JMicron JMB366 SATA300 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeafe000-0xfeafffff irq 17 at device 0.0 on pci4
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 50
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfeafe000
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports PM supported
ata2: <ATA channel 0> on atapci0
ata2: AHCI reset...
ata2: SATA connect status=00000000
ata2: AHCI reset done: phy reset found no device
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: AHCI reset...
ata3: SATA connect time=0ms
ata3: ready wait time=0ms
ata3: software reset port 15...
ata3: ready wait time=0ms
ata3: SIGNATURE: 96690101
ata3: Portmultiplier (id=47261095 rev=1f06) with 7 ports
ata3: p0: connect status=00000000
ata3: p1: connect time 0ms
ata3: software reset port 1...
ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001
ata3: software reset set timeout
ata3: p1: SIGNATURE=ffffffff
ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001
ata3: error writing PM port
ata3: p2: writing ATA_SC_DET_RESET failed
ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001
ata3: error writing PM port
ata3: p3: writing ATA_SC_DET_RESET failed
ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001
ata3: error writing PM port
ata3: p4: writing ATA_SC_DET_RESET failed
ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001
ata3: error writing PM port
ata3: p5: writing ATA_SC_DET_RESET failed
ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001
ata3: error writing PM port
ata3: p6: writing ATA_SC_DET_RESET failed
ata3: AHCI reset done: devices=00008000
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xdc00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd880
ata4: reset tp1 mask=03 ostat0=60 ostat1=70
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata4: reset tp2 stat0=20 stat1=30 devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd800
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd480
ata5: reset tp1 mask=03 ostat0=60 ostat1=70
ata5: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata5: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata5: reset tp2 stat0=20 stat1=30 devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib4: domain 0
pcib4: secondary bus 3
pcib4: subordinate bus 3
pcib4: I/O decode 0xc000-0xcfff
pcib4: memory decode 0xfe900000-0xfe9fffff
pcib4: no prefetched decode
pci3: <ACPI PCI bus> on pcib4
pci3: domain=0, physical bus=3
found-> vendor=0x11ab, dev=0x6101, revid=0xb2
domain=0, bus=3, slot=0, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0xcc00, size 3, enabled
pcib4: requested I/O range 0xcc00-0xcc07: in range
map[14]: type I/O Port, range 32, base 0xc880, size 2, enabled
pcib4: requested I/O range 0xc880-0xc883: in range
map[18]: type I/O Port, range 32, base 0xc800, size 3, enabled
pcib4: requested I/O range 0xc800-0xc807: in range
map[1c]: type I/O Port, range 32, base 0xc480, size 2, enabled
pcib4: requested I/O range 0xc480-0xc483: in range
map[20]: type I/O Port, range 32, base 0xc400, size 4, enabled
pcib4: requested I/O range 0xc400-0xc40f: in range
map[24]: type Memory, range 32, base 0xfe9ffc00, size 9, enabled
pcib4: requested memory range 0xfe9ffc00-0xfe9ffdff: good
pcib4: matched entry for 3.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 16
atapci1: <Marvell 88SX6101 UDMA133 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem 0xfe9ffc00-0xfe9ffdff irq 16 at device 0.0 on pci3
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51
atapci1: [MPSAFE]
atapci1: [ITHREAD]
ata6: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc00
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc880
ata6: reset tp1 mask=03 ostat0=50 ostat1=00
ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata6: reset tp2 stat0=00 stat1=00 devices=0x10000
ata6: [MPSAFE]
ata6: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib5: domain 0
pcib5: secondary bus 2
pcib5: subordinate bus 2
pcib5: I/O decode 0xb000-0xbfff
pcib5: memory decode 0xfe800000-0xfe8fffff
pcib5: prefetched decode 0xf6f00000-0xf6ffffff
pci2: <ACPI PCI bus> on pcib5
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x02
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 2 messages, 64 bit
MSI-X supports 2 messages in map 0x20
map[10]: type I/O Port, range 32, base 0xb800, size 8, enabled
pcib5: requested I/O range 0xb800-0xb8ff: in range
map[18]: type Prefetchable Memory, range 64, base 0xf6fff000, size 12, enabled
pcib5: requested memory range 0xf6fff000-0xf6ffffff: good
map[20]: type Prefetchable Memory, range 64, base 0xf6fe0000, size 16, enabled
pcib5: requested memory range 0xf6fe0000-0xf6feffff: good
pcib5: matched entry for 2.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 17
pci2: <network, ethernet> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x0-0x0
pcib6: no prefetched decode
pcib6: Subtractively decoded bridge.
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel (ID=3a228086) AHCI controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xf7ffe800-0xf7ffefff irq 19 at device 31.2 on pci0
atapci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x9400
atapci2: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf7ffe800
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: AHCI Version 01.20 controller with 6 ports PM supported
ata7: <ATA channel 0> on atapci2
ata7: AHCI reset...
ata7: SATA connect time=0ms
ata7: ready wait time=36ms
ata7: software reset port 15...
ata7: ready wait time=0ms
ata7: SIGNATURE: 00000101
ata7: AHCI reset done: devices=00000001
ata7: [MPSAFE]
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci2
ata8: AHCI reset...
ata8: SATA connect status=00000000
ata8: AHCI reset done: phy reset found no device
ata8: [MPSAFE]
ata8: [ITHREAD]
ata9: <ATA channel 2> on atapci2
ata9: AHCI reset...
ata9: SATA connect status=00000000
ata9: AHCI reset done: phy reset found no device
ata9: [MPSAFE]
ata9: [ITHREAD]
ata10: <ATA channel 3> on atapci2
ata10: AHCI reset...
ata10: SATA connect status=00000000
ata10: AHCI reset done: phy reset found no device
ata10: [MPSAFE]
ata10: [ITHREAD]
ata11: <ATA channel 4> on atapci2
ata11: AHCI reset...
ata11: SATA connect status=00000000
ata11: AHCI reset done: phy reset found no device
ata11: [MPSAFE]
ata11: [ITHREAD]
ata12: <ATA channel 5> on atapci2
ata12: AHCI reset...
ata12: SATA connect status=00000000
ata12: AHCI reset done: phy reset found no device
ata12: [MPSAFE]
ata12: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - A5, should be A4 [20070320]
ACPI: SSDT @ 0x0xcff8e0d0/0x0277 (v 1 DpgPmm P001Ist 0x00000011 INTL 0x20051117)
cpu0: switching to generic Cx mode
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (2078, 2337)
est0: Invalid freq 2670, ignored.
est0: Invalid id16 (set, cur) = (1818, 2337)
est0: Invalid freq 2336, ignored.
est0: Invalid id16 (set, cur) = (1558, 2337)
est0: Invalid freq 2003, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092106000921
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd2000-0xd47ff on isa0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8 irq 3 on isa0
uart2: not probed (disabled)
uart3: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 514175 -> 100000
lapic: Divisor 2, Frequency 167224845 hz
Timecounter "TSC" frequency 3010047111 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
ata3: Identifying devices: 00008000
ata3: New devices: 00008000
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
ata6: Identifying devices: 00010000
ata6: New devices: 00010000
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acd0: <HL-DT-ST DVDRAM GSA-4163B/A103> DVDR drive at ata6 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata7: Identifying devices: 00000001
ata7: New devices: 00000001
ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad14: 1430799MB <Seagate ST31500341AS CC1H> at ata7-master SATA300
ad14: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad14
ad14: Intel check1 failed
ad14: Adaptec check1 failed
ad14: LSI (v3) check1 failed
ad14: LSI (v2) check1 failed
ad14: FreeBSD check1 failed
ata8: Identifying devices: 00000000
ata8: New devices: 00000000
ata9: Identifying devices: 00000000
ata9: New devices: 00000000
ata10: Identifying devices: 00000000
ata10: New devices: 00000000
ata11: Identifying devices: 00000000
ata11: New devices: 00000000
ata12: Identifying devices: 00000000
ata12: New devices: 00000000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: routingG EiOnMt:p ina d91 4(s1I:S Ag eIoRmQe t9r)y tdoo elsa pnioct 1m avteccht olra b4e8l
(2i5o5ahp,i6c30s: !r=o u1t6ihn,g6 3isn)t.pi
n 17 (PCI IRQ 17) to lapic 1 vector 49
msi: Assigning MSI IRQ 256 to local APIC 1 vector 50
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad10s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:ad14s1a
Trying to mount root from ufs:ad14s1a
ct_to_ts([2009-03-12 11:00:03]) = 1236855603.000000000
start_init: trying /sbin/init
em0: Link is up 1000 Mbps Full Duplex
splash: image decoder found: blank_saver
More information about the freebsd-current
mailing list