panic on (hdd)load

Uwe Grohnwaldt uwe at grohnwaldt.eu
Fri Jan 2 22:03:13 UTC 2009


hi,

i try to install freebsd-current on a dedicated strato-server. i got a 
panic on load with dbench and bonnie++ (but even on normal workload as a 
tinderbox).

db> bt
Tracing pid 3 tid 100011 td 0xffffff00014eb390
kdb_enter() at kdb_enter+61
panic() at panic+379
bufinit() at bufinit
brelse() at brelse+2237
bufdone() at bufdone+108
ffs_backgroundwritedone() at ffs_backgroundwritedone+172
bufdone() at bufdone+65
g_io_schedule_up() at g_io_schedule_up+241
g_up_procbody() at g_up_procbody+111
fork_exit() at fork_exit+298
fork_trampoline() at fork_trampoline+14
--- trap 0, rip = 0, rsp = 18446744066193640768, rbp = 0 ---

uname -a
FreeBSD unixfreunde.lando.cc 8.0-CURRENT FreeBSD 8.0-CURRENT #1: Fri 
Jan  2 17:49:11 UTC 2009     
root at unixfreunde.lando.cc:/usr/obj/usr/src/sys/GENERIC  amd64

unixfreunde# pciconf -lv |less
none0 at pci0:0:0:0:       class=0x050000 card=0x10c51734 chip=0x02f010de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Host Bridge'
    class      = memory
    subclass   = RAM
none1 at pci0:0:0:1:       class=0x050000 card=0x10c51734 chip=0x02fa10de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Memory Controller 0'
    class      = memory
    subclass   = RAM
none2 at pci0:0:0:2:       class=0x050000 card=0x10c51734 chip=0x02fe10de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Memory Controller 1'
    class      = memory
    subclass   = RAM
none3 at pci0:0:0:3:       class=0x050000 card=0x10c51734 chip=0x02f810de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Memory Controller 5'
    class      = memory
none3 at pci0:0:0:3:       class=0x050000 card=0x10c51734 chip=0x02f810de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Memory Controller 5'
    class      = memory
    subclass   = RAM
none4 at pci0:0:0:4:       class=0x050000 card=0x10c51734 chip=0x02f910de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Memory Controller 4'
    class      = memory
    subclass   = RAM
none5 at pci0:0:0:5:       class=0x050000 card=0x10c51734 chip=0x02ff10de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Host Bridge'
    class      = memory
    subclass   = RAM
none6 at pci0:0:0:6:       class=0x050000 card=0x10c51734 chip=0x027f10de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Memory Controller 3'
    class      = memory
    subclass   = RAM
none7 at pci0:0:0:7:       class=0x050000 card=0x10c51734 chip=0x027e10de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Memory Controller 2'
    class      = memory
    subclass   = RAM
none7 at pci0:0:0:7:       class=0x050000 card=0x10c51734 chip=0x027e10de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'C51 Memory Controller 2'
    class      = memory
    subclass   = RAM
pcib1 at pci0:0:2:0:       class=0x060400 card=0x000010de chip=0x02fc10de 
rev=0xa1 hdr=0x01
    vendor     = 'Nvidia Corp'
    device     = 'C51 PCIe Bridge'
    class      = bridge
    subclass   = PCI-PCI
pcib2 at pci0:0:3:0:       class=0x060400 card=0x000010de chip=0x02fd10de 
rev=0xa1 hdr=0x01
    vendor     = 'Nvidia Corp'
    device     = 'C51 PCIe Bridge'
    class      = bridge
    subclass   = PCI-PCI
vgapci0 at pci0:0:5:0:     class=0x030000 card=0x10c51734 chip=0x024110de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'NVS 210S nVidia GForce 6150, build in DELL Optiplex 
740 (AMD Processor)'
    class      = display
    subclass   = VGA
none8 at pci0:0:9:0:       class=0x050000 card=0x10c61734 chip=0x027010de 
rev=0xa2 hdr=0x00
    device     = 'NVS 210S nVidia GForce 6150, build in DELL Optiplex 
740 (AMD Processor)'
    class      = display
    subclass   = VGA
none8 at pci0:0:9:0:       class=0x050000 card=0x10c61734 chip=0x027010de 
rev=0xa2 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'MCP51 Host Bridge'
    class      = memory
    subclass   = RAM
isab0 at pci0:0:10:0:      class=0x060100 card=0x10c61734 chip=0x026010de 
rev=0xa3 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'MCP51 LPC Bridge'
    class      = bridge
    subclass   = PCI-ISA
none9 at pci0:0:10:1:      class=0x0c0500 card=0x10c61734 chip=0x026410de 
rev=0xa3 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'NVIDIA SMB Bus Controller NVIDIA nForce PCI System 
Management'
    class      = serial bus
    subclass   = SMBus
ohci0 at pci0:0:11:0:      class=0x0c0310 card=0x10c61734 chip=0x026d10de 
rev=0xa3 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'MCP51 USB Controller'
    class      = serial bus
    subclass   = USB
ehci0 at pci0:0:11:1:      class=0x0c0320 card=0x10c61734 chip=0x026e10de 
rev=0xa3 :
    device     = 'MCP51 USB Controller'
    class      = serial bus
    subclass   = USB
hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'MCP51 USB Controller'
    class      = serial bus
    subclass   = USB
atapci0 at pci0:0:13:0:    class=0x01018a card=0x10c61734 chip=0x026510de 
rev=0xf1 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'MCP51 Parallel ATA Controller'
    class      = mass storage
    subclass   = ATA
atapci1 at pci0:0:14:0:    class=0x010185 card=0x10c61734 chip=0x026610de 
rev=0xf1 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'MCP51 Serial ATA Controller'
    class      = mass storage
    subclass   = ATA
atapci2 at pci0:0:15:0:    class=0x010185 card=0x10c61734 chip=0x026710de 
rev=0xf1 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'MCP51 Serial ATA Controller'
    class      = mass storage
    subclass   = ATA
atapci2 at pci0:0:15:0:    class=0x010185 card=0x10c61734 chip=0x026710de 
rev=0xf1 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'MCP51 Serial ATA Controller'
    class      = mass storage
    subclass   = ATA
pcib3 at pci0:0:16:0:      class=0x060401 card=0xcb8410de chip=0x026f10de 
rev=0xa2 hdr=0x01
    vendor     = 'Nvidia Corp'
    device     = 'MCP51 PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
hostb0 at pci0:0:24:0:     class=0x060000 card=0x00000000 chip=0x11001022 
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron HyperTransport Technology 
Configuration'
    class      = bridge
    subclass   = HOST-PCI
hostb1 at pci0:0:24:1:     class=0x060000 card=0x00000000 chip=0x11011022 
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron Address Map'
    class      = bridge
    subclass   = HOST-PCI
hostb2 at pci0:0:24:2:     class=0x060000 card=0x00000000 chip=0x11021022 
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
hostb3 at pci0:0:24:3:     class=0x060000 card=0x00000000 chip=0x11031022 
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron Miscellaneous Control'
    class      = bridge
    subclass   = HOST-PCI
em0 at pci0:4:7:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'PRO/1000 GT'
    class      = network
    subclass   = ethernet


unixfreunde# dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #1: Fri Jan  2 17:49:11 UTC 2009
    root at unixfreunde.lando.cc:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80efb000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2210068590 Hz
CPU: Dual-Core AMD Opteron(tm) Processor 1214 HE (2210.07-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f33  Stepping = 3
  
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way 
associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way 
associative
usable memory = 4261937152 (4064 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000f29000 - 0x00000000d7097fff, 3591827456 bytes (876911 pages)
0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages)
avail memory  = 4106321920 (3916 MB)
ACPI APIC Table: <PTLTD          APIC  >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP @ 0x0xf7810/0x0014 (v  0 PTLTD )
ACPI: RSDT @ 0x0xdef12a72/0x0038 (v  1 PTLTD    RSDT   0x00060000  LTP 
0x00000000)
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP @ 0x0xf7810/0x0014 (v  0 PTLTD )
ACPI: RSDT @ 0x0xdef12a72/0x0038 (v  1 PTLTD    RSDT   0x00060000  LTP 
0x00000000)
ACPI: FACP @ 0x0xdef15cce/0x0074 (v  1 FSC             0x00060000      
0x000F4240)
ACPI: DSDT @ 0x0xdef12aaa/0x3224 (v  1 FSC    D246x    0x00060000 MSFT 
0x03000001)
ACPI: FACS @ 0x0xdef16fc0/0x0040
ACPI: SSDT @ 0x0xdef15d42/0x0206 (v  1 PTLTD  POWERNOW 0x00060000  LTP 
0x00000001)
ACPI: APIC @ 0x0xdef15f48/0x0054 (v  1 PTLTD     APIC   0x00060000  LTP 
0x00000000)
ACPI: MCFG @ 0x0xdef15f9c/0x003C (v  1 PTLTD    MCFG   0x00060000  LTP 
0x00000000)
ACPI: BOOT @ 0x0xdef15fd8/0x0028 (v  1 PTLTD  $SBFTBL$ 0x00060000  LTP 
0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ath_rate: version 1.9 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jan  2 2009 
17:47:36)
acpi0: <PTLTD   RSDT> on motherboard
PCIe: Memory Mapped configuration base @ 0xfc000000
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PIRQ -> bus 0 dev 10 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.HPET.MMTB -> bus 0 dev 0 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  5 7 10 11 14 15
  Validation          0   10   N     0  5 7 10 11 14 15
  After Disable       0  255   N     0  5 7 10 11 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11 14 15
  Validation          0  255   N     0  5 7 10 11 14 15
  After Disable       0  255   N     0  5 7 10 11 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11 14 15
  Validation          0  255   N     0  5 7 10 11 14 15
  After Disable       0  255   N     0  5 7 10 11 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11 14 15
  Validation          0  255   N     0  5 7 10 11 14 15
  After Disable       0  255   N     0  5 7 10 11 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19 20 21 22 23
  Validation          0  255   N     0  16 17 18 19 20 21 22 23
  After Disable       0  255   N     0  16 17 18 19 20 21 22 23
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x02f0, revid=0xa2
        domain=0, bus=0, slot=0, func=0
        class=05-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02fa, revid=0xa2
        domain=0, bus=0, slot=0, func=1
        class=05-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02fe, revid=0xa2
        domain=0, bus=0, slot=0, func=2
        class=05-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02f8, revid=0xa2
        domain=0, bus=0, slot=0, func=3
        class=05-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02f9, revid=0xa2
        domain=0, bus=0, slot=0, func=4
        class=05-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02ff, revid=0xa2
        domain=0, bus=0, slot=0, func=5
        class=05-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x027f, revid=0xa2
        domain=0, bus=0, slot=0, func=6
        class=05-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0100, statreg=0x0020, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x027e, revid=0xa2
        domain=0, bus=0, slot=0, func=7
        class=05-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02fc, revid=0xa1
        domain=0, bus=0, slot=2, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x02fd, revid=0xa1
        domain=0, bus=0, slot=3, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0241, revid=0xa2
        domain=0, bus=0, slot=5, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 32, base 0xf1000000, size 24, enabled
        map[14]: type Prefetchable Memory, range 64, base 0xe0000000, 
size 28, enabled
        map[1c]: type Memory, range 64, base 0xf0000000, size 24, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.LPC_.LNKG:0)
pci_link6: Picked IRQ 16 with weight 0
ioapic0: Changing polarity for pin 16 to high
pcib0: slot 5 INTA routed to irq 16 via \\_SB_.PCI0.LPC_.LNKG
found-> vendor=0x10de, dev=0x0270, revid=0xa2
        domain=0, bus=0, slot=9, func=0
        class=05-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0260, revid=0xa3
        domain=0, bus=0, slot=10, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type I/O Port, range 32, base 0x8800, size  7, enabled
found-> vendor=0x10de, dev=0x0264, revid=0xa3
        domain=0, bus=0, slot=10, func=1
        class=0c-05-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[20]: type I/O Port, range 32, base 0x88c0, size  6, enabled
        map[24]: type I/O Port, range 32, base 0x8880, size  6, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LPC_.LNKK:0)
pci_link10: Picked IRQ 17 with weight 0
ioapic0: Changing polarity for pin 17 to high
pcib0: slot 10 INTA routed to irq 17 via \\_SB_.PCI0.LPC_.LNKK
found-> vendor=0x10de, dev=0x026d, revid=0xa3
        domain=0, bus=0, slot=11, func=0
        class=0c-03-10, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xf2300000, size 12, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LPC_.LNKJ:0)
pci_link9: Picked IRQ 18 with weight 0
ioapic0: Changing polarity for pin 18 to high
pcib0: slot 11 INTA routed to irq 18 via \\_SB_.PCI0.LPC_.LNKJ
found-> vendor=0x10de, dev=0x026e, revid=0xa3
        domain=0, bus=0, slot=11, func=1
        class=0c-03-20, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        intpin=b, irq=7
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xf2303000, size  8, enabled
pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.LPC_.LNKI:0)
pci_link8: Picked IRQ 19 with weight 0
ioapic0: Changing polarity for pin 19 to high
pcib0: slot 11 INTB routed to irq 19 via \\_SB_.PCI0.LPC_.LNKI
found-> vendor=0x10de, dev=0x0265, revid=0xf1
        domain=0, bus=0, slot=13, func=0
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        powerspec 2  supports D0 D3  current D0
        map[20]: type I/O Port, range 32, base 0x8c00, size  4, enabled
found-> vendor=0x10de, dev=0x0266, revid=0xf1
        domain=0, bus=0, slot=14, func=0
        class=01-01-85, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D3  current D0
        MSI supports 4 messages, 64 bit
        map[10]: type I/O Port, range 32, base 0x8c40, size  3, enabled
        map[14]: type I/O Port, range 32, base 0x8c34, size  2, enabled
        map[14]: type I/O Port, range 32, base 0x8c34, size  2, enabled
        map[18]: type I/O Port, range 32, base 0x8c38, size  3, enabled
        map[1c]: type I/O Port, range 32, base 0x8c30, size  2, enabled
        map[20]: type I/O Port, range 32, base 0x8c10, size  4, enabled
        map[24]: type Memory, range 32, base 0xf2301000, size 12, memory 
disabled
pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.LPC_.LNKN:0)
pci_link13: Picked IRQ 20 with weight 0
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 14 INTA routed to irq 20 via \\_SB_.PCI0.LPC_.LNKN
found-> vendor=0x10de, dev=0x0267, revid=0xf1
        domain=0, bus=0, slot=15, func=0
        class=01-01-85, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 4 messages, 64 bit
        map[10]: type I/O Port, range 32, base 0x8c58, size  3, enabled
        map[14]: type I/O Port, range 32, base 0x8c4c, size  2, enabled
        map[18]: type I/O Port, range 32, base 0x8c50, size  3, enabled
        map[1c]: type I/O Port, range 32, base 0x8c48, size  2, enabled
        map[20]: type I/O Port, range 32, base 0x8c20, size  4, enabled
        map[24]: type Memory, range 32, base 0xf2302000, size 12, enabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LPC_.LNKO:0)
pci_link14: Picked IRQ 21 with weight 0
ioapic0: Changing polarity for pin 21 to high
pcib0: slot 15 INTA routed to irq 21 via \\_SB_.PCI0.LPC_.LNKO
found-> vendor=0x10de, dev=0x026f, revid=0xa2
        domain=0, bus=0, slot=16, func=0
        class=06-04-01, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
        domain=0, bus=0, slot=24, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
        domain=0, bus=0, slot=24, func=1
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
        domain=0, bus=0, slot=24, func=2
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
        domain=0, bus=0, slot=24, func=3
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xf000-0xfff
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
vgapci0: <VGA-compatible display> mem 
0xf1000000-0xf1ffffff,0xe0000000-0xefffffff,0xf0000000-0xf0ffffff irq 16 
at device 5.0 on pci0
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x8800-0x887f at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xf2300000-0xf2300fff irq 18 
at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf2300000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf2303000-0xf23030ff irq 
19 at device 11.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf2303000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8c00-0x8c0f at device 13.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8c00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP51 SATA300 controller> port 
0x8c40-0x8c47,0x8c34-0x8c37,0x8c38-0x8c3f,0x8c30-0x8c33,0x8c10-0x8c1f 
mem 0xf2301000-0xf2301fff irq 20 at device 14.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8c10
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xf2301000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8c40
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8c34
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0xd0 err=0x00 lsb=0xe0 msb=0x33
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8c38
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x8c30
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP51 SATA300 controller> port 
0x8c58-0x8c5f,0x8c4c-0x8c4f,0x8c50-0x8c57,0x8c48-0x8c4b,0x8c20-0x8c2f 
mem 0xf2302000-0xf2302fff irq 21 at device 15.0 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8c20
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 54
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xf2302000
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8c58
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8c4c
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8c50
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x8c48
ata5: SATA connect status=00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     4
pcib3:   subordinate bus   4
pcib3:   I/O decode        0x9000-0x9fff
pcib3:   memory decode     0xf2000000-0xf20fffff
pcib3:   no prefetched decode
pcib3:   Subtractively decoded bridge.
ACPI: Found matching pin for 4.7.INTA at func 0: 10
pci4: <ACPI PCI bus> on pcib3
pci4: domain=0, physical bus=4
found-> vendor=0x8086, dev=0x107c, revid=0x05
        domain=0, bus=4, slot=7, func=0
        domain=0, bus=4, slot=7, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xf2020000, size 17, enabled
pcib3: requested memory range 0xf2020000-0xf203ffff: good
        map[14]: type Memory, range 32, base 0xf2000000, size 17, enabled
pcib3: requested memory range 0xf2000000-0xf201ffff: good
        map[18]: type I/O Port, range 32, base 0x9000, size  6, enabled
pcib3: requested I/O range 0x9000-0x903f: in range
pcib3: matched entry for 4.7.INTA (src \\_SB_.PCI0.LPC_.LNKA:0)
ioapic0: Changing trigger for pin 10 to level
pcib3: slot 7 INTA routed to irq 10 via \\_SB_.PCI0.LPC_.LNKA
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x9000-0x903f mem 
0xf2020000-0xf203ffff,0xf2000000-0xf201ffff irq 10 at device 7.0 on pci4
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xf2020000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x9000
ioapic0: routing intpin 10 (ISA IRQ 10) to vector 55
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:1b:21:27:9d:13
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
acpi_hpet0: <High Precision Event Timer> iomem 0x1e0e000-0x1e0efff on acpi0
device_attach: acpi_hpet0 attach returned 12
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
atkbdc: atkbdc-1 already exists; skipping it
psmcpnp0: <PS/2 mouse port> port 0x60,0x64 irq 12 on acpi0
psm0: current command byte:0067
psm0: failed to reset the aux device.
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
uart0: [FILTER]
uart0: fast interrupt
uart0: console (57600,n,8,1)
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_hpet0: <High Precision Event Timer> iomem 0x1e0e000-0x1e0efff on acpi0
device_attach: acpi_hpet0 attach returned 12
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ex_isa_identify()
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
uart2: not probed (disabled)
uart3: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 258194 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100457663 hz
Timecounter "TSC" frequency 2210068590 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: identify ch->devices=00000000
ata1: identify ch->devices=00000000
ata2: identify ch->devices=00000001
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata2-master SATA300
ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: identify ch->devices=00000001
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata3-master SATA300
ad6: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
ad6: nVidia check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ata4: identify ch->devices=00000000
ata5: identify ch->devices=00000000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 10 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 20 to local APIC 0
ioapic0: Assigning PCI IRQ 21 to local APIC 1
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
ct_to_ts([2009-01-02 21:45:01]) = 1230932701.000000000
start_init: trying /sbin/init
lock order reversal:
 1st 0xffffff00014ef070 user map (user map) @ /usr/src/sys/vm/vm_map.c:3198
 2nd 0xffffff00047d5270 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2079
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
__lockmgr_args() at __lockmgr_args+0xca8
ffs_lock() at ffs_lock+0x8c
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x47
vget() at vget+0x8b
vnode_pager_lock() at vnode_pager_lock+0x1d0
vm_fault() at vm_fault+0x1e2
trap_pfault() at trap_pfault+0x128
trap() at trap+0x51c
calltrap() at calltrap+0x8
--- trap 0xc, rip = 0x40014f, rsp = 0x7fffffffee70, rbp = 0x7fffffffee90 ---
em0: Link is up 100 Mbps Full Duplex
em0: link state changed to UP

thanks for any help.

chers,
uwe


More information about the freebsd-current mailing list