new usb: mass storage error, Synchronize cache failed

[Renato Botelho]

On Wed, Apr 8, 2009 at 5:47 PM, Hans Petter Selasky <hselasky at c2i.net> wrote:
> On Wednesday 08 April 2009, Renato Botelho wrote:
>> umass0:  SCSI over Bulk-Only; quirks = 0x0000
>
>
> umass0:  SCSI over Bulk-Only; quirks = 0x0000
>
> If the quirks print is still zero, then your patch is not correct, or you have
> not recompiled and installed the patched files!

Sorry, my fault, I made a mistake on product ID, but it still doesn't
work, here is the new dmesg:

ugen1.2: <EZZE-E800GF> at usbus1
umass0: <EZZE -Storage> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <GF-500  > Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 982MB (2012160 512 byte sectors: 64H 32S/T 982C)
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <GF-500  > Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: 1MB (3668 512 byte sectors: 64H 32S/T 1C)
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
ugen1.2: <EZZE-E800GF> at usbus1 (disconnected)
umass0: at uhub1, port 1, addr 2 (disconnected)
(da1:umass-sim0:0:0:1): Synchronize cache failed, status == 0x3f, scsi
status == 0x0
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
(da1:umass-sim0:0:0:1): lost device
(da1:umass-sim0:0:0:1): removing device entry

-- 
Renato Botelho