atapci IRQ storm on a Dell E6400
Pontus Stenetorp
ninjin at nada.kth.se
Fri Nov 14 00:33:38 PST 2008
Hello CURRENT,
I am running FreeBSD 8.0-CURRENT on a Dell E6400 laptop and I am
experiencing an IRQ storm on atapci. My dual-core ends up working at
about 40% CPU on interrupts. I have attached, uname -a, dmesg, vmstat
-i, top -S and my kernconf. The only changes made to the kernconf are
the ones described in /usr/src/UPDATING as to improve performance for
FreeBSD 8.x The reason I have for running CURRENT is that the my Dell
E6400 kern panics shortly after boot on FreeBSD 7.0-STABLE and on
FreeBSD 7.1-BETA2. A photo of a panic can be found below.
Thanks for any help regarding this,
Pontus Stenetorp
\begin{uname -a}
FreeBSD enoki 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Mon Nov 10 04:08:41
PST 2008 root at enoki:/usr/obj/usr/src/sys/ENOKI0 i386
\end{uname -a}
\begin{dmesg}
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Mon Nov 10 04:08:41 PST 2008
root at enoki:/usr/obj/usr/src/sys/ENOKI0
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz (2527.02-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2135216128 (2036 MB)
avail memory = 2081230848 (1984 MB)
ACPI APIC Table: <DELL M09 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.10.5.10 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112,
RF2413, RF5413, RF2133, RF2425, RF2417)
acpi0: <DELL M09 > on motherboard
acpi0: [ITHREAD]
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, 7f34d400 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x930,0x934 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem
0xf5000000-0xf5ffffff,0xe0000000-0xefffffff,0xf2000000-0xf3ffffff irq 16
at device 0.0 on pci1
em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0xefe0-0xefff mem
0xf6fe0000-0xf6ffffff,0xf6fdb000-0xf6fdbfff irq 22 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:21:70:b5:24:b8
uhci0: <Intel 82801I (ICH9) USB controller> port 0x6f60-0x6f7f irq 20 at
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801I (ICH9) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801I (ICH9) USB controller> port 0x6f80-0x6f9f irq 21 at
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801I (ICH9) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801I (ICH9) USB controller> port 0x6fa0-0x6fbf irq 22 at
device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801I (ICH9) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
ugen0: <SONiX Technology Inc. Laptop_Integrated_Webcam_0.3M, class
239/2, rev 2.00/86.10, addr 2> on uhub3
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib2
ath0: <Atheros 5212> mem 0xf1ff0000-0xf1ffffff irq 16 at device 0.0 on pci11
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: mac 10.3 phy 6.1 radio 10.2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib3
pci12: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci13: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci14: <ACPI PCI bus> on pcib5
uhci3: <Intel 82801I (ICH9) USB controller> port 0x6f00-0x6f1f irq 20 at
device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801I (ICH9) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801I (ICH9) USB controller> port 0x6f20-0x6f3f irq 21 at
device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801I (ICH9) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <Intel 82801I (ICH9) USB controller> port 0x6f40-0x6f5f irq 22 at
device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <Intel 82801I (ICH9) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib6
fwohci0: <1394 Open Host Controller Interface> mem 0xf1bff800-0xf1bfffff
irq 17 at device 1.0 on pci3
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 33:4f:c0:00:20:81:35:e1
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:81:35:e1
fwe0: Ethernet address: 32:4f:c0:81:35:e1
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 33:4f:c0:00:20:81:35:e1 @ 0xfffe00000000, S400,
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1094000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci3: <base peripheral, SD host controller> at device 1.1 (no driver
attached)
pci3: <base peripheral> at device 1.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port
0x6e70-0x6e77,0x6e78-0x6e7b,0x6e80-0x6e87,0x6e88-0x6e8b,0x6ea0-0x6eaf,0x6e90-0x6e9f
irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ATA controller> port
0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xefa0-0xefaf
irq 19 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on
acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
uart0: <16550 or compatible> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
uart0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj
0xc52c66c0 [20070320]
ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands
for [OpcodeName unavailable] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed
[\\_PR_.CPU0._OSC] (Node 0xc52a0180), AE_AML_INTERNAL
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj
0xc52c6440 [20070320]
ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands
for [OpcodeName unavailable] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed
[\\_PR_.CPU1._OSC] (Node 0xc52a00a0), AE_AML_INTERNAL
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcffff pnpid
ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub8: <Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 2> on uhub0
uhub8: 3 ports with 0 removable, self powered
ukbd0: <vendor 0x413c product 0x8157, class 0/0, rev 2.00/1.00, addr 3>
on uhub8
kbd2 at ukbd0
ums0: <vendor 0x413c product 0x8158, class 0/0, rev 2.00/1.00, addr 4>
on uhub8
ums0: 3 buttons.
ugen1: <Broadcom Corp 5880, class 0/0, rev 1.10/1.01, addr 2> on uhub2
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 238475MB <FUJITSU MHZ2250BJ FFS G2 0085001C> at ata2-master UDMA33
unknown: timeout waiting for read DRQ
unknown: timeout waiting for read DRQ
acd0: DVDR <PLDS DVD+/-RW DU-8A2S/4D12> at ata3-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s2a
wlan0: Ethernet address: xx:xx:xx:xx:xx:xx
ath0: ath_hal_init_channels failed, rd 98 cc 511 outdoor 0 ecm 1
wlan0: link state changed to UP
\end{dmesg}
\begin{vmstat -i output}
interrupt total rate
irq1: atkbd0 8899 3
irq9: acpi0 1208 0
irq12: psm0 82725 29
irq16: ath0 91826 32
irq17: fwohci0 3 0
irq19: atapci0+ 154687206 55245
irq20: uhci0 uhci+ 12 0
irq22: uhci2 ehci+ 5 0
cpu0: timer 5599330 1999
cpu1: timer 5589315 1996
Total 166060529 59307
\end{vmstat -i output}
\begin{top -S output}
last pid: 83401; load averages: 0.11, 0.15, 0.24 up
0+00:49:20 22:44:12
121 processes: 4 running, 97 sleeping, 2 zombie, 18 waiting
CPU: 1.3% user, 0.0% nice, 0.4% system, 42.7% interrupt, 55.6% idle
Mem: 171M Active, 245M Inact, 116M Wired, 2316K Cache, 112M Buf, 1454M Free
Swap: 2048M Total, 2048M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
11 root 2 171 ki31 0K 16K RUN 0 41:41 108.06% idle
12 root 19 -64 - 0K 152K WAIT 0 41:41 88.28% intr
\end{top -S output}
\begin{kernconf}
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.500 2008/10/09 21:25:01
n_hibma Exp $
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident ENKI0
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options STOP_NMI # Stop CPUS using NMI instead of IPI
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
# Debugging for use in -current
#options KDB # Enable kernel debugger support.
#options DDB # Support DDB.
#options GDB # Support remote GDB.
#options INVARIANTS # Enable calls of extra sanity checking
#options INVARIANT_SUPPORT # Extra sanity checks of internal
structures, required by INVARIANTS
#options WITNESS # Enable checks to detect deadlocks and
cycles
#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two lines are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
device ahd # AHA39320/29320 and onboard AIC79xx devices
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
device amd # AMD 53C974 (Tekram DC-390(T))
device hptiop # Highpoint RocketRaid 3xxx series
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of
`ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device arcmsr # Areca SATA II RAID
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options
device hptmv # Highpoint RocketRAID 182x
device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device mfi # LSI MegaRAID SAS
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 Gigabit Ethernet Family
device igb # Intel PRO/1000 PCIE Server Gigabit Family
device ixgb # Intel PRO/10GbE Ethernet Card
device le # AMD Am7900 LANCE and Am79C9xx PCnet
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device ae # Attansic/Atheros L2 FastEthernet
device age # Attansic/Atheros L1 Gigabit Ethernet
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device et # Agere ET1310 10/100/Gigabit Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device lge # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device nfe # nVidia nForce MCP on-board Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device sn # SMC's 9000 series of Ethernet chips
device xe # Xircom pccard Ethernet
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros pci/cardbus NIC's
device ath_hal # Atheros HAL (Hardware Access Layer)
device ath_rate_sample # SampleRate tx rate control for ath
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device ural # Ralink Technology RT2500USB wireless NICs
device rum # Ralink Technology RT2501USB wireless NICs
device zyd # ZyDAS zb1211/zb1211b wireless NICs
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Serial devices
device ucom # Generic com ttys
device u3g # USB-based 3G modems (Option, Huawei, Sierra)
device uark # Technologies ARK3116 based serial adapters
device ubsa # Belkin F5U103 and compatible serial adapters
device uftdi # For FTDI usb serial adapters
device uipaq # Some WinCE based devices
device uplcom # Prolific PL-2303 serial adapters
device uslcom # SI Labs CP2101/CP2102 serial adapters
device uvisor # Visor and Palm devices
device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
device udav # Davicom DM9601E USB
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
device fwip # IP over FireWire (RFC 2734,3146)
device dcons # Dumb console driver
device dcons_crom # Configuration ROM for dcons
\end{kernconf}
\begin{FreeBSD 7.1-BETA2 panic photo}
http://pici.se/p/BwsmUJsvx/
\end{FreeBSD 7.1-BETA2 panic photo}
More information about the freebsd-current
mailing list