Cardbus GbE (Realtek 8169SBL) supported?

[Pyun YongHyeon]

On Thu, May 22, 2008 at 10:20:32AM +0900, Norikatsu Shigemura wrote:
 > Hi Pyun.
 > 
 > On Tue, 20 May 2008 09:13:12 +0900
 > Pyun YongHyeon <pyunyh at gmail.com> wrote:
 > >  > re0: Chip rev. 0x10000000
 > >         ^^^^^^^^^^^^^^^^^^^^
 > > Hmm, this looks very weird. This revision indicates the hardware is
 > > 8169SB/8110SB. The chip revision of your first mail was 0x7cc00000.
 > 
 > 	Hum....
 > 
 > >  > 	Please wait a while until next report:-).
 > > Ok, let me know how it goes.
 > 
 > 	There are some problems on PHY operations like following:
 > 
 > 	1. doesn't manual link up, offten.
 > # ifconfig re0 up
 > re0: PHY write failed
 > re0: PHY write failed
 > re0: PHY write failed
 > re0: PHY write failed
 > #
 > (But 'status: no carrier' or no 'status:' line)
 > 
 > 	2. doesn't automatic link up on connected to L2SW, sometimes.
 > # ifconfig re0
 >   :
 > 	staus: no carrier
 > 
 > 	Sometimes, good works. Such as, RTL8169SBL communicated good.
 > 	Overall, it is not stable.

Would you show me the output of "devinfo -v | grep oui"?

-- 
Regards,
Pyun YongHyeon