problems making an access point w/current
Randy Bush
randy at psg.com
Tue Jun 10 07:56:33 UTC 2008
with the following:
wlans_ath0="wlan0"
cloned_interfaces=bridge0
ifconfig_bridge0="192.168.0.1 addm vr1 addm vr2 addm vr3 addm wlan0 up"
ipv6_ifconfig_bridge0="inet6 2001:240:6a8::1/64"
ifconfig_vr1=up
ifconfig_vr2=up
ifconfig_vr3=up
ifconfig_wlan0="channel 11 ssid rgnet-aden wep wepkey thirteenchars
weptxkey 1 mediaopt hostap up"
i am not seeing carrier on wlan0 and i am not seeing the access point
from local hosts.
randy
# ifconfig ath0
ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
0 mtu 2290
ether 00:0b:6b:83:59:25
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
# ifconfig wlan0
wlan0:
flags=8d43<UP,BROADCAST,RUNNING,PROMISC,OACTIVE,SIMPLEX,MULTICAST>
metric 0 mtu 1500
ether 00:0b:6b:83:59:25
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid rgnet-aden channel 11 (2462 Mhz 11g)
country US ecm authmode OPEN privacy ON deftxkey 1 wepkey 1:104-bit
txpower 19 bmiss 7 scanvalid 60 bgscan bgscanintvl 300
bgscanidle 250
roam:rssi 7 roam:rate 5 protmode CTS wme burst ff dturbo bintval 0
# athstats
4537885 data frames received
1016560 data frames transmit
1934 mib overflow interrupts
0M current transmit rate
1016560 tx frames with no ack marked
1280120 rx failed 'cuz of bad CRC
2192058 rx failed 'cuz frame too short
54659 rx failed 'cuz of PHY err
7152 transmit override receive
2 OFDM restart
47505 CCK restart
6 rssi of last ack
1 switched default/rx antenna
Antenna profile:
[1] tx 1016558 rx 4537884
[2] tx 0 rx 1
-30-
More information about the freebsd-current
mailing list