Call for testers: re(4) and RTL8168C/RTL8168CP/RTL8111C/RTL8111CP

[Pyun YongHyeon]

On Mon, Jun 09, 2008 at 02:26:02PM +0200, Dimitry Andric wrote:
 > On 2008-06-09 03:26, Pyun YongHyeon wrote:
 > >  > > http://people.freebsd.org/~yongari/re/re.HEAD.20080607
 > >  > With this patch, all my re's stop working. :( No packets go in, no
 > > Would you show me re(4) related part of dmesg output?
 > 
 > Hmm, it's very strange.  One reboot, the interfaces don't work, the next
 > one they do!  It's a bit unpredictable...
 > 
 > dmesg after patch:
 > 
 > re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfdfff000-0xfdfff0ff irq 18 at device 9.0 on pci0
 > re0: Chip rev. 0x18000000
 > re0: MAC rev. 0x00000000
 > miibus0: <MII bus> on re0
 > rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
 > rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
 > re0: Ethernet address: 00:30:18:a6:f1:a8
 > re0: [FILTER]
 > re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf200-0xf2ff mem 0xfdffe000-0xfdffe0ff irq 19 at device 11.0 on pci0
 > re1: Chip rev. 0x18000000
 > re1: MAC rev. 0x00000000
 > miibus1: <MII bus> on re1
 > rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
 > rgephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
 > re1: Ethernet address: 00:30:18:a6:f1:a9
 > re1: [FILTER]
 > 
 > ifconfig says both interfaces have rxcsum, txcsum and tso4 on:
 > 
 > re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
 > 	options=399b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
 > ...
 > re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
 > 	options=399b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_UCAST,WOL_MCAST,WOL_MAGIC>

Would you show me the output of "devinfo -rv | grep oui"?

Thanks.
-- 
Regards,
Pyun YongHyeon