Broken APIC on my laptop or bug in FreeBSD?

Giorgos Keramidas keramida at freebsd.org
Fri Jul 18 16:16:23 UTC 2008


I recently had to replace my dead laptop, and I bought a replacement
relatively fast, but something is broken with APIC on this one.

FreeSBIE 2.0.1 (based on 6.2-RELEASE) seems to automatically disable the
APIC, using hint.apic.0.disabled="1", so I didn't realize APIC failed to
work properly until I dump(8) and restore(8)'d my backup to the new
laptop.

After booting with the APIC enabled, I found out that:

  * In single user mode, after `boot -sv', I can keep working without
    any major slow down.

  * When I exit single user mode, and a few of the rc.d startup scripts
    run, the laptop becomes progressively slower, and eventually crawls
    to an unusable state.  I can almost complete logging in as `root' in
    ttyv0 but only if I keep furiously moving the mouse around.  If I
    don't move the mouse at all, the typed characters may never actually
    appear on ttyv0.

I tried booting with APIC enabled and disabled, and grabbed most of the
output of `dmesg'.  I think I can also grab `vmstat -i' output with the
APIC enabled, but I don't have a serial console, so it may take a few
iterations.

Attached are the two dmesg files with and without the APIC.  Any ideas
if this is a bug in FreeBSD or a completely bogus APIC?

-------------- next part --------------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Tue Jul  8 09:10:21 EEST 2008
    build at kobe:/home/build/obj/home/build/src/sys/KOBE
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b2f000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b2f25c.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2094760227 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz (2094.76-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 3072 kbytes, 8-way associative, 64 bytes/line
real memory  = 2137849856 (2038 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000007d4a1fff, 2089275392 bytes (510077 pages)
avail memory = 2088751104 (1991 MB)
Table 'FACP' at 0x7f6dbd48
Table 'APIC' at 0x7f6dbe3c
MADT: Found table at 0x7f6dbe3c
MP Configuration Table version 1.4 found at 0xc009fd71
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <INTEL  CRESTLNE>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
bios32: Found BIOS32 Service Directory header at 0xc00f7c30
bios32: Entry = 0xfdb80 (c00fdb80)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfdb80+0x221
pnpbios: Found PnP BIOS data at 0xc00f7ca0
pnpbios: Entry = f0000:c0bc  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP @ 0x0xf7c00/0x0024 (v  2 PTLTD )
ACPI: XSDT @ 0x0x7f6d4062/0x008C (v  1 PTLTD  	 XSDT   0x06040000  LTP 0x00000000)
ACPI: FACP @ 0x0x7f6dbd48/0x00F4 (v  3 INTEL  CRESTLNE 0x06040000 ALAN 0x00000001)
ACPI: DSDT @ 0x0x7f6d5e3b/0x5E99 (v  2 INTEL  CRESTLNE 0x06040000 INTL 0x20050624)
ACPI: FACS @ 0x0x7f6defc0/0x0040
ACPI: APIC @ 0x0x7f6dbe3c/0x0068 (v  1 INTEL  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: HPET @ 0x0x7f6dbea4/0x0038 (v  1 INTEL  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: MCFG @ 0x0x7f6dbedc/0x003C (v  1 INTEL  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: TCPA @ 0x0x7f6dbf18/0x0032 (v  1 Intel   CRESTLN 0x06040000      0x00005A52)
ACPI: TMOR @ 0x0x7f6dbf4a/0x0026 (v  1 PTLTD           0x06040000 PTL  0x00000003)
ACPI: APIC @ 0x0x7f6dbf70/0x0068 (v  1 PTLTD  	 APIC   0x06040000  LTP 0x00000000)
ACPI: BOOT @ 0x0x7f6dbfd8/0x0028 (v  1 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001)
ACPI: SSDT @ 0x0x7f6d57ec/0x064F (v  1 SataRe  SataPri 0x00001000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d515a/0x0692 (v  1 SataRe  SataSec 0x00001000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d467a/0x0258 (v  1  PmRef  Cpu0Tst 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d45d4/0x00A6 (v  1  PmRef  Cpu1Tst 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d40ee/0x04E6 (v  1  PmRef    CpuPm 0x00003000 INTL 0x20050624)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
nfslock: pseudo-device
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
npx0: INT 16 interface
acpi0: <PTLTD 	 XSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc4a79000 pa 0x1000
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000fa04
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=2a008086)
pcibios: BIOS version 3.00
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.MCHC.HBUS -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
ACPI timer: 0/3 0/3 1/2 0/3 1/2 1/2 0/3 0/3 1/2 1/2 -> 5
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0    5   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0    7   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2a00, revid=0x03
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2a02, revid=0x03
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xf0c00000, size 20, enabled
	map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
	map[20]: type I/O Port, range 32, base 0x1800, size  3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2a03, revid=0x03
	domain=0, bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xf0d00000, size 20, enabled
found->	vendor=0x8086, dev=0x2834, revid=0x03
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	map[20]: type I/O Port, range 32, base 0x1820, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2835, revid=0x03
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x1840, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x283a, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf1204000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x284b, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf1200000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x283f, revid=0x03
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x2841, revid=0x03
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2843, revid=0x03
	domain=0, bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x2845, revid=0x03
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2847, revid=0x03
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x2849, revid=0x03
	domain=0, bus=0, slot=28, func=5
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2830, revid=0x03
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x1860, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2831, revid=0x03
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2832, revid=0x03
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	map[20]: type I/O Port, range 32, base 0x18a0, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x2836, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf1204400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2448, revid=0xf3
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2815, revid=0x03
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2828, revid=0x03
	domain=0, bus=0, slot=31, func=2
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 3  supports D0 D3  current D0
	map[20]: type I/O Port, range 32, base 0x18e0, size  4, enabled
	map[24]: type I/O Port, range 32, base 0x18d0, size  4, enabled
found->	vendor=0x8086, dev=0x283e, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[10]: type Memory, range 32, base 0, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x1c00, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0c00000-0xf0cfffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xf0c00000
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf0d00000-0xf0dfffff at device 2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1840-0x185f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf1204000-0xf12043ff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf1204000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0: <Syntek USB2.0, class 0/0, rev 2.00/0.05, addr 2> on uhub2
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     2
pcib1:   subordinate bus   3
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf0e00000-0xf0efffff
pcib1:   no prefetched decode
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x4229, revid=0x61
	domain=0, bus=2, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf0e00000, size 13, enabled
pcib1: requested memory range 0xf0e00000-0xf0e01fff: good
pcib1: matched entry for 2.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci2: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     4
pcib2:   subordinate bus   5
pcib2:   I/O decode        0x2000-0x2fff
pcib2:   memory decode     0xf0600000-0xf07fffff
pcib2:   prefetched decode 0xf0000000-0xf01fffff
pci4: <ACPI PCI bus> on pcib2
pci4: domain=0, physical bus=4
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3:   domain            0
pcib3:   secondary bus     6
pcib3:   subordinate bus   7
pcib3:   I/O decode        0x3000-0x3fff
pcib3:   memory decode     0xf0800000-0xf09fffff
pcib3:   prefetched decode 0xf0200000-0xf03fffff
pci6: <ACPI PCI bus> on pcib3
pci6: domain=0, physical bus=6
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib4:   domain            0
pcib4:   secondary bus     8
pcib4:   subordinate bus   9
pcib4:   I/O decode        0x4000-0x4fff
pcib4:   memory decode     0xf0a00000-0xf0bfffff
pcib4:   prefetched decode 0xf0400000-0xf05fffff
pci8: <ACPI PCI bus> on pcib4
pci8: domain=0, physical bus=8
found->	vendor=0x10ec, dev=0x8168, revid=0x01
	domain=0, bus=8, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 2 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0x4000, size  8, enabled
pcib4: requested I/O range 0x4000-0x40ff: in range
	map[18]: type Memory, range 64, base 0xf0a00000, size 12, enabled
pcib4: requested memory range 0xf0a00000-0xf0a00fff: good
pcib4: matched entry for 8.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 19
pci8: <network, ethernet> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib5:   domain            0
pcib5:   secondary bus     10
pcib5:   subordinate bus   10
pcib5:   I/O decode        0xf000-0xfff
pcib5:   no prefetched decode
pci10: <ACPI PCI bus> on pcib5
pci10: domain=0, physical bus=10
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib6:   domain            0
pcib6:   secondary bus     11
pcib6:   subordinate bus   11
pcib6:   I/O decode        0xf000-0xfff
pcib6:   no prefetched decode
pci11: <ACPI PCI bus> on pcib6
pci11: domain=0, physical bus=11
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1860-0x187f irq 23 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1880-0x189f irq 19 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf1204400-0xf12047ff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf1204400
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     12
pcib7:   subordinate bus   12
pcib7:   I/O decode        0x5000-0x5fff
pcib7:   memory decode     0xf0f00000-0xf0ffffff
pcib7:   no prefetched decode
pcib7:   Subtractively decoded bridge.
pci12: <ACPI PCI bus> on pcib7
pci12: domain=0, physical bus=12
found->	vendor=0x1524, dev=0x0730, revid=0x00
	domain=0, bus=12, slot=7, func=0
	class=05-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf0f00000, size  7, enabled
pcib7: requested memory range 0xf0f00000-0xf0f0007f: good
pcib7: matched entry for 12.7.INTA
pcib7: slot 7 INTA hardwired to IRQ 16
found->	vendor=0x1524, dev=0x0750, revid=0x00
	domain=0, bus=12, slot=7, func=1
	class=08-05-01, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf0f00400, size  8, enabled
pcib7: requested memory range 0xf0f00400-0xf0f004ff: good
pcib7: matched entry for 12.7.INTA
pcib7: slot 7 INTA hardwired to IRQ 16
found->	vendor=0x1524, dev=0x0751, revid=0x00
	domain=0, bus=12, slot=7, func=3
	class=05-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0, size  8, memory disabled
found->	vendor=0x1106, dev=0x3044, revid=0xc0
	domain=0, bus=12, slot=9, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf0f00800, size 11, enabled
pcib7: requested memory range 0xf0f00800-0xf0f00fff: good
	map[14]: type I/O Port, range 32, base 0x5000, size  7, enabled
pcib7: requested I/O range 0x5000-0x507f: in range
pcib7: matched entry for 12.9.INTA
pcib7: slot 9 INTA hardwired to IRQ 19
pci12: <memory, flash> at device 7.0 (no driver attached)
pci12: <base peripheral> at device 7.1 (no driver attached)
pci12: <memory, flash> at device 7.3 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0x5000-0x507f mem 0xf0f00800-0xf0f00fff irq 19 at device 9.0 on pci12
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf0f00800
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:00:43:35
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7d474000
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:00:43:35
fwe0: bpf attached
fwe0: Ethernet address: 02:00:00:00:43:35
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:00:00:00:00:00:43:35 @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef,0x18d0-0x18df at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18e0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=01 devices=0x10000
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x7f6d4e01/0x02A8 (v  1  PmRef  Cpu0Ist 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d48d2/0x04AA (v  1  PmRef  Cpu0Cst 0x00003001 INTL 0x20050624)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (19240, 18978)
est0: Invalid freq 2101, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x7f6d50a9/0x00B1 (v  1  PmRef  Cpu1Ist 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d4d7c/0x0085 (v  1  PmRef  Cpu1Cst 0x00003000 INTL 0x20050624)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (19240, 18978)
est1: Invalid freq 2101, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x8ea1 0x8ea1 0x8ea1 0x8ea1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x8ea1 0x8ea1 0x8ea1 0x8ea1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x8ea1 0x8ea1 0x8ea1 0x8ea1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/57.00, addr 2> on uhub3
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/57.00, addr 2> on uhub3
ugen1: <vendor 0x0a12 product 0x0001, class 224/1, rev 2.00/31.64, addr 2> on uhub5
Device configuration finished.
Reducing kern.maxvnodes 133914 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750489 hz
Timecounter "TSC" frequency 2094760227 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pflog0: bpf attached
pfsync0: bpf attached
ata0: identify ch->devices=00000001
battery0: battery initialization start
acpi_acad0: acline initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
atapicam: atapicam0 already exists; skipping it
ad0: 238475MB <TOSHIBA MK2552GSX LV010A> at ata0-master UDMA33
ad0: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1: identify ch->devices=00010000
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
battery0: battery initialization done, tried 1 times
acd0: <TSSTcorp CDDVDW TS-L632H/TMC0> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
GEOM_LABEL: Label for provider ad0s1a is ufs/GKEROOT.
GEOM_LABEL: Label for provider ad0s1e is ufs/GKERHOME.
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe1:sbp0:0:0:0): error 22
(probe1:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:1:0): error 22
(probe2:sbp0:0:1:0): Unretryable Error
(probe3:sbp0:0:2:0): error 22
(probe3:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:3:0): error 22
(probe4:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:4:0): error 22
(probe5:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:5:0): error 22
(probe6:sbp0:0:5:0): Unretryable Error
(probe7:sbp0:0:6:0): error 22
(probe7:sbp0:0:6:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <TSSTcorp CDDVDW TS-L632H TMC0> Removable CD-ROM SCSI-0 device 
pass0: 33.000MB/s transfers
GEOM: new disk cd0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TSSTcorp CDDVDW TS-L632H TMC0> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010200 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 21 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 0
WARNING: WITNESS option enabled, expect reduced performance.
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
lock order reversal: (sleepable after non-sleepable)
 1st 0xc510a01c struct mount mtx (struct mount mtx) @ /home/build/src/sys/kern/vfs_subr.c:343
 2nd 0xc510a000 vfslock (vfslock) @ /home/build/src/sys/kern/vfs_subr.c:370
KDB: stack backtrace:
db_trace_self_wrapper(c08cb92a,c4a83b64,c061992e,c08ce22a,c510a000,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c08ce22a,c510a000,c08d4159,c08d4159,c08d46fe,...) at kdb_backtrace+0x29
witness_checkorder(c510a000,1,c08d46fe,172,c097cff4,...) at witness_checkorder+0x6de
__lockmgr_args(c510a000,200100,c510a01c,0,0,...) at __lockmgr_args+0x230
vfs_busy(c510a000,200,0,c4c97d20,1,...) at vfs_busy+0x1bc
vfs_mount_alloc(0,c09149e0,c08d44a4,c4c97d20,c06574c0,...) at vfs_mount_alloc+0x78
vfs_mountroot(c0970130,4,c08c3243,264,0,...) at vfs_mountroot+0x26c
start_init(0,c4a83d38,c08c4c0f,322,c4c95d0c,...) at start_init+0x65
fork_exit(c05a16c0,0,c4a83d38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc4a83d70, ebp = 0 ---
lock order reversal: (sleepable after non-sleepable)
 1st 0xc4f84e10 vnode interlock (vnode interlock) @ /home/build/src/sys/fs/devfs/devfs_vnops.c:288
 2nd 0xc4f84df4 devfs (devfs) @ /home/build/src/sys/kern/vfs_subr.c:2044
KDB: stack backtrace:
db_trace_self_wrapper(c08cb92a,c4a83a8c,c061992e,c08ce22a,c4f84df4,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c08ce22a,c4f84df4,c08be913,c08be913,c08d46fe,...) at kdb_backtrace+0x29
witness_checkorder(c4f84df4,9,c08d46fe,7fc,c4f84df4,...) at witness_checkorder+0x6de
__lockmgr_args(c4f84df4,80100,c4f84e10,0,0,...) at __lockmgr_args+0x777
vop_stdlock(c4a83b8c,c08bead7,c08c1e97,80100,c4f84d9c,...) at vop_stdlock+0x62
VOP_LOCK1_APV(c0914ac0,c4a83b8c,c0951ea0,c4f84d9c,80100,...) at VOP_LOCK1_APV+0xa5
_vn_lock(c4f84d9c,80100,c08d46fe,7fc,c08bead7,...) at _vn_lock+0x5e
vget(c4f84d9c,80100,c4c97d20,121,c08bea6d,...) at vget+0x9c
devfs_allocv(c50cd900,c510a000,c4a83c20,c4c97d20,c4c97dc4,...) at devfs_allocv+0x11a
devfs_root(c510a000,80000,c09c4db4,c4c97d20,4,...) at devfs_root+0x51
set_rootvnode(c09c4da0,0,c08d4054,5f1,c06574c0,...) at set_rootvnode+0x2d
vfs_mountroot(c0970130,4,c08c3243,264,0,...) at vfs_mountroot+0x34c
start_init(0,c4a83d38,c08c4c0f,322,c4c95d0c,...) at start_init+0x65
fork_exit(c05a16c0,0,c4a83d38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc4a83d70, ebp = 0 ---
Trying to mount root from ufs:/dev/ad0s1a
ct_to_ts([2008-07-17 05:40:08]) = 1216273208.000000000
lock order reversal: (sleepable after non-sleepable)
 1st 0xc4f84b20 bufobj interlock (bufobj interlock) @ /home/build/src/sys/kern/vfs_bio.c:2442
 2nd 0xd8ce5c80 bufwait (bufwait) @ /home/build/src/sys/kern/vfs_bio.c:2456
KDB: stack backtrace:
db_trace_self_wrapper(c08cb92a,c4a83784,c061992e,c08ce22a,d8ce5c80,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c08ce22a,d8ce5c80,c08d2fec,c08d2fec,c08d2594,...) at kdb_backtrace+0x29
witness_checkorder(d8ce5c80,9,c08d2594,998,c097cff4,...) at witness_checkorder+0x6de
__lockmgr_args(d8ce5c80,81900,c4f84b20,c08d2f48,50,...) at __lockmgr_args+0x777
getblk(c4f84a78,0,0,800,0,...) at getblk+0x153
breadn(c4f84a78,0,0,800,0,...) at breadn+0x44
bread(c4f84a78,0,0,800,0,...) at bread+0x4c
ffs_blkatoff(c4f84a78,0,0,0,c4a839a4,...) at ffs_blkatoff+0xd1
ufs_lookup(c4a839e8,c4f84a78,c4a83b38,c4f84a78,c4a83a08,...) at ufs_lookup+0x2e6
VOP_CACHEDLOOKUP_APV(c093b4c0,c4a839e8,c4a83b38,c4a83b24,c4c9c800,...) at VOP_CACHEDLOOKUP_APV+0xa5
vfs_cache_lookup(c4a83a68,c4a83a68,500000c,80000,c4f84a78,...) at vfs_cache_lookup+0xd0
VOP_LOOKUP_APV(c093b4c0,c4a83a68,c08d3dfb,1b0,c4a83b24,...) at VOP_LOOKUP_APV+0xa5
lookup(c4a83b0c,c08d3dfb,d8,c0,c4c6922c,...) at lookup+0x57e
namei(c4a83b0c,c4a83b24,c061910c,c08d4159,c08d44a0,...) at namei+0x44b
kern_unlinkat(c4c97d20,ffffff9c,c08d44a0,1,c4a83c5c,...) at kern_unlinkat+0x46
kern_unlink(c4c97d20,c08d44a0,1,62c,0,...) at kern_unlink+0x27
vfs_mountroot_try(c08d465a,c08c1e99,c08bc8a9,1,c06574c0,...) at vfs_mountroot_try+0x482
vfs_mountroot(c0970130,4,c08c3243,264,0,...) at vfs_mountroot+0x40e
start_init(0,c4a83d38,c08c4c0f,322,c4c95d0c,...) at start_init+0x65
fork_exit(c05a16c0,0,c4a83d38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc4a83d70, ebp = 0 ---
start_init: trying /sbin/init
GEOM_LABEL: Label ufs/GKEROOT removed.
GEOM_LABEL: Label for provider ad0s1a is ufs/GKEROOT.
GEOM_LABEL: Label ufs/GKERHOME removed.
GEOM_LABEL: Label for provider ad0s1e is ufs/GKERHOME.
GEOM_LABEL: Label ufs/GKEROOT removed.
GEOM_LABEL: Label ufs/GKERHOME removed.
-------------- next part --------------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Tue Jul  8 09:10:21 EEST 2008
    build at kobe:/home/build/obj/home/build/src/sys/KOBE
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b3a000.
Preloaded elf module "/boot/kernel/if_re.ko" at 0xc0b3a25c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b3a308.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2094763555 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz (2094.76-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 3072 kbytes, 8-way associative, 64 bytes/line
real memory  = 2137849856 (2038 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000007d4a1fff, 2089275392 bytes (510077 pages)
avail memory = 2088747008 (1991 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f7c30
bios32: Entry = 0xfdb80 (c00fdb80)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfdb80+0x221
pnpbios: Found PnP BIOS data at 0xc00f7ca0
pnpbios: Entry = f0000:c0bc  Rev = 1.0
Other BIOS signatures found:
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
ULE: setup cpu 0
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
nfslock: pseudo-device
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
ACPI: RSDP @ 0x0xf7c00/0x0024 (v  2 PTLTD )
ACPI: XSDT @ 0x0x7f6d4062/0x008C (v  1 PTLTD  	 XSDT   0x06040000  LTP 0x00000000)
ACPI: FACP @ 0x0x7f6dbd48/0x00F4 (v  3 INTEL  CRESTLNE 0x06040000 ALAN 0x00000001)
ACPI: DSDT @ 0x0x7f6d5e3b/0x5E99 (v  2 INTEL  CRESTLNE 0x06040000 INTL 0x20050624)
ACPI: FACS @ 0x0x7f6defc0/0x0040
ACPI: APIC @ 0x0x7f6dbe3c/0x0068 (v  1 INTEL  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: HPET @ 0x0x7f6dbea4/0x0038 (v  1 INTEL  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: MCFG @ 0x0x7f6dbedc/0x003C (v  1 INTEL  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: TCPA @ 0x0x7f6dbf18/0x0032 (v  1 Intel   CRESTLN 0x06040000      0x00005A52)
ACPI: TMOR @ 0x0x7f6dbf4a/0x0026 (v  1 PTLTD           0x06040000 PTL  0x00000003)
ACPI: APIC @ 0x0x7f6dbf70/0x0068 (v  1 PTLTD  	 APIC   0x06040000  LTP 0x00000000)
ACPI: BOOT @ 0x0x7f6dbfd8/0x0028 (v  1 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001)
ACPI: SSDT @ 0x0x7f6d57ec/0x064F (v  1 SataRe  SataPri 0x00001000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d515a/0x0692 (v  1 SataRe  SataSec 0x00001000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d467a/0x0258 (v  1  PmRef  Cpu0Tst 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d45d4/0x00A6 (v  1  PmRef  Cpu1Tst 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d40ee/0x04E6 (v  1  PmRef    CpuPm 0x00003000 INTL 0x20050624)
npx0: INT 16 interface
acpi0: <PTLTD 	 XSDT> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc4a79000 pa 0x1000
atpic: Programming IRQ9 as level/low
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000fa04
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=2a008086)
pcibios: BIOS version 3.00
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.MCHC.HBUS -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
ACPI timer: 0/3 1/2 1/2 1/2 0/3 0/3 1/2 1/2 0/3 1/2 -> 6
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0    5   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0    7   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.2.INTA at func 0: 5
ACPI: Found matching pin for 0.26.INTA at func 0: 5
ACPI: Found matching pin for 0.26.INTB at func 1: 11
ACPI: Found matching pin for 0.26.INTC at func 7: 7
ACPI: Found matching pin for 0.27.INTA at func 0: 11
pci_link6: BIOS IRQ 11 for 0.27.INTA is invalid
ACPI: Found matching pin for 0.28.INTA at func 0: 10
pci_link1: BIOS IRQ 10 for 0.28.INTA is invalid
ACPI: Found matching pin for 0.28.INTB at func 1: 5
ACPI: Found matching pin for 0.28.INTC at func 2: 7
ACPI: Found matching pin for 0.28.INTD at func 3: 10
pci_link3: BIOS IRQ 10 for 0.28.INTD is invalid
ACPI: Found matching pin for 0.29.INTA at func 0: 10
pci_link7: BIOS IRQ 10 for 0.29.INTA is invalid
ACPI: Found matching pin for 0.29.INTB at func 1: 10
pci_link3: BIOS IRQ 10 for 0.29.INTB is invalid
ACPI: Found matching pin for 0.29.INTC at func 2: 7
ACPI: Found matching pin for 0.31.INTB at func 2: 255
ACPI: Found matching pin for 0.31.INTC at func 3: 10
pci_link3: BIOS IRQ 10 for 0.31.INTC is invalid
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2a00, revid=0x03
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2a02, revid=0x03
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xf0c00000, size 20, enabled
	map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
	map[20]: type I/O Port, range 32, base 0x1800, size  3, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 2 INTA routed to irq 5 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x8086, dev=0x2a03, revid=0x03
	domain=0, bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xf0d00000, size 20, enabled
found->	vendor=0x8086, dev=0x2834, revid=0x03
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	map[20]: type I/O Port, range 32, base 0x1820, size  5, enabled
pcib0: matched entry for 0.26.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 26 INTA routed to irq 5 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x8086, dev=0x2835, revid=0x03
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x1840, size  5, enabled
pcib0: matched entry for 0.26.INTB (src \\_SB_.PCI0.LPCB.LNKF:0)
pcib0: slot 26 INTB routed to irq 11 via \\_SB_.PCI0.LPCB.LNKF
found->	vendor=0x8086, dev=0x283a, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf1204000, size 10, enabled
pcib0: matched entry for 0.26.INTC (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib0: slot 26 INTC routed to irq 7 via \\_SB_.PCI0.LPCB.LNKC
found->	vendor=0x8086, dev=0x284b, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf1200000, size 14, enabled
pcib0: matched entry for 0.27.INTA (src \\_SB_.PCI0.LPCB.LNKG:0)
pci_link6: Picked IRQ 9 with weight 0
pcib0: slot 27 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKG
found->	vendor=0x8086, dev=0x283f, revid=0x03
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA (src \\_SB_.PCI0.LPCB.LNKB:0)
pci_link1: Picked IRQ 11 with weight 1
pcib0: slot 28 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKB
found->	vendor=0x8086, dev=0x2841, revid=0x03
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 28 INTB routed to irq 5 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x8086, dev=0x2843, revid=0x03
	domain=0, bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTC (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib0: slot 28 INTC routed to irq 7 via \\_SB_.PCI0.LPCB.LNKC
found->	vendor=0x8086, dev=0x2845, revid=0x03
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTD (src \\_SB_.PCI0.LPCB.LNKD:0)
pci_link3: Picked IRQ 9 with weight 1
pcib0: slot 28 INTD routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD
found->	vendor=0x8086, dev=0x2847, revid=0x03
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA (src \\_SB_.PCI0.LPCB.LNKB:0)
pcib0: slot 28 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKB
found->	vendor=0x8086, dev=0x2849, revid=0x03
	domain=0, bus=0, slot=28, func=5
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 28 INTB routed to irq 5 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x8086, dev=0x2830, revid=0x03
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x1860, size  5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0)
pci_link7: Picked IRQ 11 with weight 3
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKH
found->	vendor=0x8086, dev=0x2831, revid=0x03
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib0: slot 29 INTB routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD
found->	vendor=0x8086, dev=0x2832, revid=0x03
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	map[20]: type I/O Port, range 32, base 0x18a0, size  5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib0: slot 29 INTC routed to irq 7 via \\_SB_.PCI0.LPCB.LNKC
found->	vendor=0x8086, dev=0x2836, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf1204400, size 10, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKH
found->	vendor=0x8086, dev=0x2448, revid=0xf3
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2815, revid=0x03
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2828, revid=0x03
	domain=0, bus=0, slot=31, func=2
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 3  supports D0 D3  current D0
	map[20]: type I/O Port, range 32, base 0x18e0, size  4, enabled
	map[24]: type I/O Port, range 32, base 0x18d0, size  4, enabled
found->	vendor=0x8086, dev=0x283e, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[10]: type Memory, range 32, base 0, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x1c00, size  5, enabled
pcib0: matched entry for 0.31.INTC (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib0: slot 31 INTC routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0c00000-0xf0cfffff,0xd0000000-0xdfffffff irq 5 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xf0c00000
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf0d00000-0xf0dfffff at device 2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1820-0x183f irq 5 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1840-0x185f irq 11 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf1204000-0xf12043ff irq 7 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf1204000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0: <Syntek USB2.0, class 0/0, rev 2.00/0.05, addr 2> on uhub2
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     2
pcib1:   subordinate bus   3
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf0e00000-0xf0efffff
pcib1:   no prefetched decode
ACPI: Found matching pin for 2.0.INTA at func 0: 5
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x4229, revid=0x61
	domain=0, bus=2, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf0e00000, size 13, enabled
pcib1: requested memory range 0xf0e00000-0xf0e01fff: good
pcib1: matched entry for 2.0.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib1: slot 0 INTA routed to irq 5 via \\_SB_.PCI0.LPCB.LNKA
pci2: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 5 at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     4
pcib2:   subordinate bus   5
pcib2:   I/O decode        0x2000-0x2fff
pcib2:   memory decode     0xf0600000-0xf07fffff
pcib2:   prefetched decode 0xf0000000-0xf01fffff
pci4: <ACPI PCI bus> on pcib2
pci4: domain=0, physical bus=4
pcib3: <ACPI PCI-PCI bridge> irq 7 at device 28.2 on pci0
pcib3:   domain            0
pcib3:   secondary bus     6
pcib3:   subordinate bus   7
pcib3:   I/O decode        0x3000-0x3fff
pcib3:   memory decode     0xf0800000-0xf09fffff
pcib3:   prefetched decode 0xf0200000-0xf03fffff
pci6: <ACPI PCI bus> on pcib3
pci6: domain=0, physical bus=6
pcib4: <ACPI PCI-PCI bridge> irq 9 at device 28.3 on pci0
pcib4:   domain            0
pcib4:   secondary bus     8
pcib4:   subordinate bus   9
pcib4:   I/O decode        0x4000-0x4fff
pcib4:   memory decode     0xf0a00000-0xf0bfffff
pcib4:   prefetched decode 0xf0400000-0xf05fffff
ACPI: Found matching pin for 8.0.INTA at func 0: 10
pci_link3: BIOS IRQ 10 for 8.0.INTA is invalid
pci8: <ACPI PCI bus> on pcib4
pci8: domain=0, physical bus=8
found->	vendor=0x10ec, dev=0x8168, revid=0x01
	domain=0, bus=8, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 2 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0x4000, size  8, enabled
pcib4: requested I/O range 0x4000-0x40ff: in range
	map[18]: type Memory, range 64, base 0xf0a00000, size 12, enabled
pcib4: requested memory range 0xf0a00000-0xf0a00fff: good
pcib4: matched entry for 8.0.INTA (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib4: slot 0 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD
re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xf0a00000-0xf0a00fff irq 9 at device 0.0 on pci8
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf0a00000
re0: MSI count : 2
re0: turning off MSI enable bit.
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:90:f5:6e:05:32
re0: [MPSAFE]
re0: [FILTER]
pcib5: <ACPI PCI-PCI bridge> irq 11 at device 28.4 on pci0
pcib5:   domain            0
pcib5:   secondary bus     10
pcib5:   subordinate bus   10
pcib5:   I/O decode        0xf000-0xfff
pcib5:   no prefetched decode
pci10: <ACPI PCI bus> on pcib5
pci10: domain=0, physical bus=10
pcib6: <ACPI PCI-PCI bridge> irq 5 at device 28.5 on pci0
pcib6:   domain            0
pcib6:   secondary bus     11
pcib6:   subordinate bus   11
pcib6:   I/O decode        0xf000-0xfff
pcib6:   no prefetched decode
pci11: <ACPI PCI bus> on pcib6
pci11: domain=0, physical bus=11
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1860-0x187f irq 11 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1880-0x189f irq 9 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18a0-0x18bf irq 7 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf1204400-0xf12047ff irq 11 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf1204400
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
umass0: <Western Digital External HDD, class 0/0, rev 2.00/1.02, addr 2> on uhub6
umass0:0:0:-1: Attached to scbus0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     12
pcib7:   subordinate bus   12
pcib7:   I/O decode        0x5000-0x5fff
pcib7:   memory decode     0xf0f00000-0xf0ffffff
pcib7:   no prefetched decode
pcib7:   Subtractively decoded bridge.
ACPI: Found matching pin for 12.7.INTA at func 0: 5
ACPI: Found matching pin for 12.9.INTA at func 0: 10
pci_link3: BIOS IRQ 10 for 12.9.INTA is invalid
pci12: <ACPI PCI bus> on pcib7
pci12: domain=0, physical bus=12
found->	vendor=0x1524, dev=0x0730, revid=0x00
	domain=0, bus=12, slot=7, func=0
	class=05-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf0f00000, size  7, enabled
pcib7: requested memory range 0xf0f00000-0xf0f0007f: good
pcib7: matched entry for 12.7.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib7: slot 7 INTA routed to irq 5 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x1524, dev=0x0750, revid=0x00
	domain=0, bus=12, slot=7, func=1
	class=08-05-01, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf0f00400, size  8, enabled
pcib7: requested memory range 0xf0f00400-0xf0f004ff: good
pcib7: matched entry for 12.7.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib7: slot 7 INTA routed to irq 5 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x1524, dev=0x0751, revid=0x00
	domain=0, bus=12, slot=7, func=3
	class=05-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0, size  8, memory disabled
found->	vendor=0x1106, dev=0x3044, revid=0xc0
	domain=0, bus=12, slot=9, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf0f00800, size 11, enabled
pcib7: requested memory range 0xf0f00800-0xf0f00fff: good
	map[14]: type I/O Port, range 32, base 0x5000, size  7, enabled
pcib7: requested I/O range 0x5000-0x507f: in range
pcib7: matched entry for 12.9.INTA (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib7: slot 9 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD
pci12: <memory, flash> at device 7.0 (no driver attached)
pci12: <base peripheral> at device 7.1 (no driver attached)
pci12: <memory, flash> at device 7.3 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0x5000-0x507f mem 0xf0f00800-0xf0f00fff irq 9 at device 9.0 on pci12
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf0f00800
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:00:43:35
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7d46c000
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:00:43:35
fwe0: bpf attached
fwe0: Ethernet address: 02:00:00:00:43:35
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:00:00:00:00:00:43:35 @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef,0x18d0-0x18df at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18e0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=01 devices=0x10000
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x7f6d4e01/0x02A8 (v  1  PmRef  Cpu0Ist 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d48d2/0x04AA (v  1  PmRef  Cpu0Cst 0x00003001 INTL 0x20050624)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0xe01 0xe01 0xe01 0xe01
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0xe01 0xe01 0xe01 0xe01
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xe01 0xe01 0xe01 0xe01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/57.00, addr 2> on uhub3
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/57.00, addr 2> on uhub3
ugen1: <vendor 0x0a12 product 0x0001, class 224/1, rev 2.00/31.64, addr 2> on uhub5
Device configuration finished.
Reducing kern.maxvnodes 133914 -> 100000
procfs registered
Timecounter "TSC" frequency 2094763555 Hz quality 800
Timecounters tick every 1.000 msec
pflog0: bpf attached
pfsync0: bpf attached
lo0: bpf attachedfirewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)

ata0: identify ch->devices=00000001
battery0: battery initialization start
acpi_acad0: acline initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
atapicam: atapicam0 already exists; skipping it
ad0: 238475MB <TOSHIBA MK2552GSX LV010A> at ata0-master UDMA33
ad0: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
ata1: identify ch->devices=00010000
GEOM: new disk ad0
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
battery0: battery initialization done, tried 1 times
acd0: <TSSTcorp CDDVDW TS-L632H/TMC0> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
GEOM_LABEL: Label for provider ad0s1a is ufs/GKEROOT.
GEOM_LABEL: Label for provider ad0s1e is ufs/GKERHOME.
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe2:sbp0:0:0:0): error 22
(probe2:sbp0:0:0:0): Unretryable Error
(probe8:sbp0:0:6:0): error 22
(probe8:sbp0:0:6:0): Unretryable Error
(probe3:sbp0:0:1:0): error 22
(probe3:sbp0:0:1:0): Unretryable Error
(probe4:sbp0:0:2:0): error 22
(probe4:sbp0:0:2:0): Unretryable Error
(probe5:sbp0:0:3:0): error 22
(probe5:sbp0:0:3:0): Unretryable Error
(probe6:sbp0:0:4:0): error 22
(probe6:sbp0:0:4:0): Unretryable Error
(probe7:sbp0:0:5:0): error 22
(probe7:sbp0:0:5:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <WD A MK803External 1.02> Fixed Direct Access SCSI-0 device 
pass0: 40.000MB/s transfers
pass1 at ata1 bus 0 target 0 lun 0
pass1: <TSSTcorp CDDVDW TS-L632H TMC0> Removable CD-ROM SCSI-0 device 
pass1: 33.000MB/s transfers
GEOM: new disk da0
WARNING: WITNESS option enabled, expect reduced performance.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <WD A MK803External 1.02> Fixed Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TSSTcorp CDDVDW TS-L632H TMC0> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
GEOM: new disk cd0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
lock order reversal: (sleepable after non-sleepable)
 1st 0xc50c301c struct mount mtx (struct mount mtx) @ /home/build/src/sys/kern/vfs_subr.c:343
 2nd 0xc50c3000 vfslock (vfslock) @ /home/build/src/sys/kern/vfs_subr.c:370
KDB: stack backtrace:
db_trace_self_wrapper(c08cb92a,c4a7fb64,c061992e,c08ce22a,c50c3000,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c08ce22a,c50c3000,c08d4159,c08d4159,c08d46fe,...) at kdb_backtrace+0x29
witness_checkorder(c50c3000,1,c08d46fe,172,c097cff4,...) at witness_checkorder+0x6de
__lockmgr_args(c50c3000,200100,c50c301c,0,0,...) at __lockmgr_args+0x230
vfs_busy(c50c3000,200,0,c4c99d20,1,...) at vfs_busy+0x1bc
vfs_mount_alloc(0,c09149e0,c08d44a4,c4c99d20,c06574c0,...) at vfs_mount_alloc+0x78
vfs_mountroot(c0970130,4,c08c3243,264,0,...) at vfs_mountroot+0x26c
start_init(0,c4a7fd38,c08c4c0f,322,c4c97d0c,...) at start_init+0x65
fork_exit(c05a16c0,0,c4a7fd38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc4a7fd70, ebp = 0 ---
lock order reversal: (sleepable after non-sleepable)
 1st 0xc4f1ce10 vnode interlock (vnode interlock) @ /home/build/src/sys/fs/devfs/devfs_vnops.c:288
 2nd 0xc4f1cdf4 devfs (devfs) @ /home/build/src/sys/kern/vfs_subr.c:2044
KDB: stack backtrace:
db_trace_self_wrapper(c08cb92a,c4a7fa8c,c061992e,c08ce22a,c4f1cdf4,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c08ce22a,c4f1cdf4,c08be913,c08be913,c08d46fe,...) at kdb_backtrace+0x29
witness_checkorder(c4f1cdf4,9,c08d46fe,7fc,c4f1cdf4,...) at witness_checkorder+0x6de
__lockmgr_args(c4f1cdf4,80100,c4f1ce10,0,0,...) at __lockmgr_args+0x777
vop_stdlock(c4a7fb8c,c08bead7,c08c1e97,80100,c4f1cd9c,...) at vop_stdlock+0x62
VOP_LOCK1_APV(c0914ac0,c4a7fb8c,c0951ea0,c4f1cd9c,80100,...) at VOP_LOCK1_APV+0xa5
_vn_lock(c4f1cd9c,80100,c08d46fe,7fc,c08bead7,...) at _vn_lock+0x5e
vget(c4f1cd9c,80100,c4c99d20,121,c08bea6d,...) at vget+0x9c
devfs_allocv(c50a7480,c50c3000,c4a7fc20,c4c99d20,c4c99dc4,...) at devfs_allocv+0x11a
devfs_root(c50c3000,80000,c09c4db4,c4c99d20,4,...) at devfs_root+0x51
set_rootvnode(c09c4da0,0,c08d4054,5f1,c06574c0,...) at set_rootvnode+0x2d
vfs_mountroot(c0970130,4,c08c3243,264,0,...) at vfs_mountroot+0x34c
start_init(0,c4a7fd38,c08c4c0f,322,c4c97d0c,...) at start_init+0x65
fork_exit(c05a16c0,0,c4a7fd38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc4a7fd70, ebp = 0 ---
Trying to mount root from ufs:/dev/ad0s1a
ct_to_ts([2008-07-17 06:04:43]) = 1216274683.000000000
lock order reversal: (sleepable after non-sleepable)
 1st 0xc4f1cb20 bufobj interlock (bufobj interlock) @ /home/build/src/sys/kern/vfs_bio.c:2442
 2nd 0xd8ce5c80 bufwait (bufwait) @ /home/build/src/sys/kern/vfs_bio.c:2456
KDB: stack backtrace:
db_trace_self_wrapper(c08cb92a,c4a7f784,c061992e,c08ce22a,d8ce5c80,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c08ce22a,d8ce5c80,c08d2fec,c08d2fec,c08d2594,...) at kdb_backtrace+0x29
witness_checkorder(d8ce5c80,9,c08d2594,998,c097cff4,...) at witness_checkorder+0x6de
__lockmgr_args(d8ce5c80,81900,c4f1cb20,c08d2f48,50,...) at __lockmgr_args+0x777
getblk(c4f1ca78,0,0,800,0,...) at getblk+0x153
breadn(c4f1ca78,0,0,800,0,...) at breadn+0x44
bread(c4f1ca78,0,0,800,0,...) at bread+0x4c
ffs_blkatoff(c4f1ca78,0,0,0,c4a7f9a4,...) at ffs_blkatoff+0xd1
ufs_lookup(c4a7f9e8,c4f1ca78,c4a7fb38,c4f1ca78,c4a7fa08,...) at ufs_lookup+0x2e6
VOP_CACHEDLOOKUP_APV(c093b4c0,c4a7f9e8,c4a7fb38,c4a7fb24,c4c69300,...) at VOP_CACHEDLOOKUP_APV+0xa5
vfs_cache_lookup(c4a7fa68,c4a7fa68,500000c,80000,c4f1ca78,...) at vfs_cache_lookup+0xd0
VOP_LOOKUP_APV(c093b4c0,c4a7fa68,c08d3dfb,1b0,c4a7fb24,...) at VOP_LOOKUP_APV+0xa5
lookup(c4a7fb0c,c08d3dfb,d8,c0,c4c6942c,...) at lookup+0x57e
namei(c4a7fb0c,c4a7fb24,c061910c,c08d4159,c08d44a0,...) at namei+0x44b
kern_unlinkat(c4c99d20,ffffff9c,c08d44a0,1,c4a7fc5c,...) at kern_unlinkat+0x46
kern_unlink(c4c99d20,c08d44a0,1,62c,0,...) at kern_unlink+0x27
vfs_mountroot_try(c08d465a,c08c1e99,c08bc8a9,1,c06574c0,...) at vfs_mountroot_try+0x482
vfs_mountroot(c0970130,4,c08c3243,264,0,...) at vfs_mountroot+0x40e
start_init(0,c4a7fd38,c08c4c0f,322,c4c97d0c,...) at start_init+0x65
fork_exit(c05a16c0,0,c4a7fd38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc4a7fd70, ebp = 0 ---
start_init: trying /sbin/init
GEOM_LABEL: Label ufs/GKEROOT removed.
GEOM_LABEL: Label for provider ad0s1a is ufs/GKEROOT.
GEOM_LABEL: Label ufs/GKERHOME removed.
GEOM_LABEL: Label for provider ad0s1e is ufs/GKERHOME.
GEOM_LABEL: Label ufs/GKEROOT removed.


More information about the freebsd-current mailing list