7.0 RC1 dump hangs - sometimes
Elliot Finley
lists at efinley.com
Fri Jan 11 09:45:49 PST 2008
<sent earlier from wrong address, this may show up as duplicate>
I'm running RELENG_7_0 as of Jan 9th (on a Dell PE 2950). When I do:
dump -3auf - /usr >
/host/backup.etv.net/back/zabbix.etv.net._usr.2008-01-11.level-3
sometimes it finishes and sometimes it hangs part way through. I've
been backing my 4.x, 5.x and 6.x systems up this way for years without
ever having an issue.
This box isn't in production yet so I can do whatever testing is
needed. I can also provide access to a developer if needed.
Looking at the bottom of the dmesg (below) I see:
nfs send error 35 for server backup:/back
Any help with this issue would be greatly appreciated.
Thanks,
Elliot
zabbix root:~#>uname -a
FreeBSD zabbix.etv.net 7.0-RC1 FreeBSD 7.0-RC1 #0: Wed Jan 9 14:45:13
MST 2008 root at zabbix.etv.net:/usr/obj/usr/src/sys/GENERIC amd64
zabbix root:~#>dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC1 #0: Wed Jan 9 14:45:13 MST 2008
root at zabbix.etv.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (1597.53-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4281675776 (4083 MB)
avail memory = 4120317952 (3929 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Jan 9 2008 14:45:01)
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci6: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce0: Ethernet address: 00:19:b9:b8:6a:df
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI )
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pci10: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pci11: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib8
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff
irq 78 at device 14.0 on pci2
mfi0: Megaraid SAS driver Ver 2.00
mfi0: 2978 (253222235s/0x0020/0) - Shutdown command received from host
mfi0: 2979 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028
0x041f03: Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 2980 (4278190080s/0x0020/0) - Type 18: Firmware version
1.03.10-0216
mfi0: 2981 (4278190099s/0x0008/0) - Battery Present
mfi0: 2982 (4278190099s/0x0020/0) - Type 18: Package version
5.1.1-0040
mfi0: 2983 (4278190127s/0x0004/0) - PD 08(e1/s255) event: Enclosure
(SES) discovered on PD 08(e1/s255)
mfi0: 2984 (4278190127s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD
08(e1/s255)
mfi0: 2985 (4278190127s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255)
Info: enclPd=08, scsiType=d, portMap=00,
sasAddr=50019090c0d7da00,0000000000000000
mfi0: 2986 (4278190127s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD
00(e1/s0)
mfi0: 2987 (4278190127s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0)
Info: enclPd=08, scsiType=0, portMap=01,
sasAddr=5000c50003928fd5,0000000000000000
mfi0: 2988 (4278190127s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD
01(e1/s1)
mfi0: 2989 (4278190127s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1)
Info: enclPd=08, scsiType=0, portMap=02,
sasAddr=5000c50003929765,0000000000000000
mfi0: 2990 (4278190127s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD
02(e1/s2)
mfi0: 2991 (4278190127s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2)
Info: enclPd=08, scsiType=0, portMap=04,
sasAddr=5000c50003922b81,0000000000000000
mfi0: 2992 (4278190127s/0x0002/0) - PD 03(e1/s3) event: Inserted: PD
03(e1/s3)
mfi0: 2993 (4278190127s/0x0002/0) - Type 29: Inserted: PD 03(e1/s3)
Info: enclPd=08, scsiType=0, portMap=08,
sasAddr=5000c500039296d5,0000000000000000
mfi0: 2994 (4278190127s/0x0002/0) - PD 04(e1/s4) event: Inserted: PD
04(e1/s4)
mfi0: 2995 (4278190127s/0x0002/0) - Type 29: Inserted: PD 04(e1/s4)
Info: enclPd=08, scsiType=0, portMap=10,
sasAddr=5000c50003929e95,0000000000000000
mfi0: 2996 (4278190127s/0x0002/0) - PD 05(e1/s5) event: Inserted: PD
05(e1/s5)
mfi0: 2997 (4278190127s/0x0002/0) - Type 29: Inserted: PD 05(e1/s5)
Info: enclPd=08, scsiType=0, portMap=20,
sasAddr=5000c50003929d81,0000000000000000
mfi0: 2998 (4278190127s/0x0042/0) - Type 22: Dedicated Hot Spare
created on PD 05(e1/s5) (ded,rev,ac=1)
mfi0: 2999 (253222599s/0x0020/0) - Adapter ticks 253222599 elapsed
48s: Time established as 01/09/08 19:36:39; (48 seconds since power
on)
mfi0: [ITHREAD]
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci12: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pci13: <PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci14: <ACPI PCI bus> on pcib12
pcib13: <PCI-PCI bridge> at device 7.0 on pci0
pci15: <PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib14
pcib15: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib15
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce1: Ethernet address: 00:19:b9:b8:6a:dd
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI )
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0xdce0-0xdcff irq 21 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0xdcc0-0xdcdf irq 20 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0xdca0-0xdcbf irq 21 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc600400-0xfc6007ff
irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 63XXESB USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
uhub4: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr
2> on uhub3
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4
kbd2 at ukbd0
ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00,
addr 4> on uhub4
umass1: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00,
addr 4> on uhub4
uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr
5> on uhub3
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci16: <ACPI PCI bus> on pcib16
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem
0xd0000000-0xd7ffffff,0xfc1f0000-0xfc1fffff irq 19 at device 13.0 on
pci16
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ukbd1: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2>
on uhub1
kbd3 at ukbd1
ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2>
on uhub1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462D/DE01> at ata0-master UDMA33
mfi0: 3000 (253222655s/0x0008/0) - Battery temperature is normal
mfi0: 3001 (253222655s/0x0008/0) - Current capacity of the battery is
above threshold
mfid0: <MFI Logical Disk> on mfi0
mfid0: 557568MB (1141899264 sectors) RAID volume 'AR0' is optimal
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <Dell Virtual Floppy 123> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not
present
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <Dell Virtual CDROM 123> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present
Trying to mount root from ufs:/dev/mfid0s1a
bce0: link state changed to UP
logo_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (logo_saver, 0xffffffffb49ee010, 0)
error 19
pid 49887 (try), uid 0: exited on signal 10 (core dumped)
mfi0: 3002 (253333350s/0x0008/0) - Battery started charging
mfi0: 3003 (253335170s/0x0008/0) - Battery charge complete
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
nfs send error 35 for server backup:/back
More information about the freebsd-current
mailing list