RC1 dump hangs - sometimes

Elliot Finley efinleywork at efinley.com
Fri Jan 11 08:13:48 PST 2008


I'm running RELENG_7_0 as of Jan 9th (on a Dell PE 2950).  When I do:

dump -3auf - /usr >
/host/backup.etv.net/back/zabbix.etv.net._usr.2008-01-11.level-3

sometimes it finishes and sometimes it hangs part way through.  I've
been backing my 4.x, 5.x and 6.x systems up this way for years without
ever having an issue.

This box isn't in production yet so I can do whatever testing is
needed.  I can also provide access to a developer if needed.

Looking at the bottom of the dmesg (below) I see:

nfs send error 35 for server backup:/back 

Any help with this issue would be greatly appreciated.

Thanks,
Elliot


zabbix root:~#>uname -a 

FreeBSD zabbix.etv.net 7.0-RC1 FreeBSD 7.0-RC1 #0: Wed Jan  9 14:45:13
MST 2008     root at zabbix.etv.net:/usr/obj/usr/src/sys/GENERIC  amd64 

  

zabbix root:~#>dmesg 

Copyright (c) 1992-2008 The FreeBSD Project. 

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994 

        The Regents of the University of California. All rights
reserved. 

FreeBSD is a registered trademark of The FreeBSD Foundation. 

FreeBSD 7.0-RC1 #0: Wed Jan  9 14:45:13 MST 2008 

    root at zabbix.etv.net:/usr/obj/usr/src/sys/GENERIC 

Timecounter "i8254" frequency 1193182 Hz quality 0 

CPU: Intel(R) Xeon(R) CPU            5110  @ 1.60GHz (1597.53-MHz
K8-class CPU) 

  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6 


Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
  AMD Features=0x20100800<SYSCALL,NX,LM> 

  AMD Features2=0x1<LAHF> 

  Cores per package: 2 

usable memory = 4281675776 (4083 MB) 

avail memory  = 4120317952 (3929 MB) 

ACPI APIC Table: <DELL   PE_SC3  > 

FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs 

 cpu0 (BSP): APIC ID:  0 

 cpu1 (AP): APIC ID:  1 

 cpu2 (AP): APIC ID:  6 

 cpu3 (AP): APIC ID:  7 

ioapic0: Changing APIC ID to 8 

ioapic1: Changing APIC ID to 9 

ioapic0 <Version 2.0> irqs 0-23 on motherboard 

ioapic1 <Version 2.0> irqs 64-87 on motherboard 

kbd1 at kbdmux0 

ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413) 

hptrr: HPT RocketRAID controller driver v1.1 (Jan  9 2008 14:45:01) 

acpi0: <DELL PE_SC3> on motherboard 

acpi0: [ITHREAD] 

acpi0: Power Button (fixed) 

Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 

acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 

acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
on acpi0 

Timecounter "HPET" frequency 14318180 Hz quality 900 

cpu0: <ACPI CPU> on acpi0 

p4tcc0: <CPU Frequency Thermal Control> on cpu0 

cpu1: <ACPI CPU> on acpi0 

p4tcc1: <CPU Frequency Thermal Control> on cpu1 

cpu2: <ACPI CPU> on acpi0 

p4tcc2: <CPU Frequency Thermal Control> on cpu2 

cpu3: <ACPI CPU> on acpi0 

p4tcc3: <CPU Frequency Thermal Control> on cpu3 

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 

pci0: <ACPI PCI bus> on pcib0 

pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 

pci6: <ACPI PCI bus> on pcib1 

pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6 

pci7: <ACPI PCI bus> on pcib2 

pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7 

pci8: <ACPI PCI bus> on pcib3 

pcib4: <PCI-PCI bridge> at device 0.0 on pci8 

pci9: <PCI bus> on pcib4 

bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9 

miibus0: <MII bus> on bce0 

brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 

brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto 

bce0: Ethernet address: 00:19:b9:b8:6a:df 

bce0: [ITHREAD] 

bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI ) 

pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7 

pci10: <ACPI PCI bus> on pcib5 

pcib6: <PCI-PCI bridge> at device 0.3 on pci6 

pci11: <PCI bus> on pcib6 

pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 

pci1: <ACPI PCI bus> on pcib7 

pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1 

pci2: <ACPI PCI bus> on pcib8 

mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff
irq 78 at device 14.0 on pci2 

mfi0: Megaraid SAS driver Ver 2.00 

mfi0: 2978 (253222235s/0x0020/0) - Shutdown command received from host
mfi0: 2979 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028
0x041f03: Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 2980 (4278190080s/0x0020/0) - Type 18: Firmware version
1.03.10-0216 

mfi0: 2981 (4278190099s/0x0008/0) - Battery Present 

mfi0: 2982 (4278190099s/0x0020/0) - Type 18: Package version
5.1.1-0040 

mfi0: 2983 (4278190127s/0x0004/0) - PD 08(e1/s255) event: Enclosure
(SES) discovered on PD 08(e1/s255) 

mfi0: 2984 (4278190127s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD
08(e1/s255) 

mfi0: 2985 (4278190127s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255)
Info: enclPd=08, scsiType=d, portMap=00,
sasAddr=50019090c0d7da00,0000000000000000 

mfi0: 2986 (4278190127s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD
00(e1/s0) 

mfi0: 2987 (4278190127s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0)
Info: enclPd=08, scsiType=0, portMap=01,
sasAddr=5000c50003928fd5,0000000000000000 

mfi0: 2988 (4278190127s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD
01(e1/s1) 

mfi0: 2989 (4278190127s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1)
Info: enclPd=08, scsiType=0, portMap=02,
sasAddr=5000c50003929765,0000000000000000 

mfi0: 2990 (4278190127s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD
02(e1/s2) 

mfi0: 2991 (4278190127s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2)
Info: enclPd=08, scsiType=0, portMap=04,
sasAddr=5000c50003922b81,0000000000000000 

mfi0: 2992 (4278190127s/0x0002/0) - PD 03(e1/s3) event: Inserted: PD
03(e1/s3) 

mfi0: 2993 (4278190127s/0x0002/0) - Type 29: Inserted: PD 03(e1/s3)
Info: enclPd=08, scsiType=0, portMap=08,
sasAddr=5000c500039296d5,0000000000000000 

mfi0: 2994 (4278190127s/0x0002/0) - PD 04(e1/s4) event: Inserted: PD
04(e1/s4) 

mfi0: 2995 (4278190127s/0x0002/0) - Type 29: Inserted: PD 04(e1/s4)
Info: enclPd=08, scsiType=0, portMap=10,
sasAddr=5000c50003929e95,0000000000000000 

mfi0: 2996 (4278190127s/0x0002/0) - PD 05(e1/s5) event: Inserted: PD
05(e1/s5) 

mfi0: 2997 (4278190127s/0x0002/0) - Type 29: Inserted: PD 05(e1/s5)
Info: enclPd=08, scsiType=0, portMap=20,
sasAddr=5000c50003929d81,0000000000000000 

mfi0: 2998 (4278190127s/0x0042/0) - Type 22: Dedicated Hot Spare
created on PD 05(e1/s5) (ded,rev,ac=1) 

mfi0: 2999 (253222599s/0x0020/0) - Adapter ticks 253222599 elapsed
48s: Time established as 01/09/08 19:36:39; (48 seconds since power
on) 

mfi0: [ITHREAD] 

pcib9: <PCI-PCI bridge> at device 0.2 on pci1 

pci3: <PCI bus> on pcib9 

pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0 

pci12: <ACPI PCI bus> on pcib10 

pcib11: <PCI-PCI bridge> at device 5.0 on pci0 

pci13: <PCI bus> on pcib11 

pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0 

pci14: <ACPI PCI bus> on pcib12 

pcib13: <PCI-PCI bridge> at device 7.0 on pci0 

pci15: <PCI bus> on pcib13 

pcib14: <ACPI PCI-PCI bridge> at device 28.0 on pci0 

pci4: <ACPI PCI bus> on pcib14 

pcib15: <PCI-PCI bridge> at device 0.0 on pci4 

pci5: <PCI bus> on pcib15 

bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5 

miibus1: <MII bus> on bce1 

brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1 

brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto 

bce1: Ethernet address: 00:19:b9:b8:6a:dd 

bce1: [ITHREAD] 

bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI ) 

uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0xdce0-0xdcff irq 21 at device 29.0 on pci0 

uhci0: [GIANT-LOCKED] 

uhci0: [ITHREAD] 

usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 

usb0: USB revision 1.0 

uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered 

uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0xdcc0-0xdcdf irq 20 at device 29.1 on pci0 

uhci1: [GIANT-LOCKED] 

uhci1: [ITHREAD] 

usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 

usb1: USB revision 1.0 

uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered 

uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0xdca0-0xdcbf irq 21 at device 29.2 on pci0 

uhci2: [GIANT-LOCKED] 

uhci2: [ITHREAD] 

usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 

usb2: USB revision 1.0 

uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered 

ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc600400-0xfc6007ff
irq 21 at device 29.7 on pci0 

ehci0: [GIANT-LOCKED] 

ehci0: [ITHREAD] 

usb3: EHCI version 1.0 

usb3: companion controllers, 2 ports each: usb0 usb1 usb2 

usb3: <Intel 63XXESB USB 2.0 controller> on ehci0 

usb3: USB revision 2.0 

uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered 

uhub4: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr
2> on uhub3 

uhub4: multiple transaction translators 

uhub4: 2 ports with 2 removable, self powered 

ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4 

kbd2 at ukbd0 

ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4 

ums0: X report 0x0002 not supported 

device_attach: ums0 attach returned 6 

umass0: <DELL  INC. DRAC5 VIRTUAL  MEDIA, class 0/0, rev 2.00/0.00,
addr 4> on uhub4 

umass1: <DELL  INC. DRAC5 VIRTUAL  MEDIA, class 0/0, rev 2.00/0.00,
addr 4> on uhub4 

uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr
5> on uhub3 

uhub5: multiple transaction translators 

uhub5: 4 ports with 4 removable, self powered 

pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0 

pci16: <ACPI PCI bus> on pcib16 

vgapci0: <VGA-compatible display> port 0xec00-0xecff mem
0xd0000000-0xd7ffffff,0xfc1f0000-0xfc1fffff irq 19 at device 13.0 on
pci16 

isab0: <PCI-ISA bridge> at device 31.0 on pci0 

isa0: <ISA bus> on isab0 

atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on
pci0 

ata0: <ATA channel 0> on atapci0 

ata0: [ITHREAD] 

ata1: <ATA channel 1> on atapci0 

ata1: [ITHREAD] 

fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0 

fdc0: does not respond 

device_attach: fdc0 attach returned 6 

sio0: configured irq 4 not in bitmap of probed irqs 0 

sio0: port may not be enabled 

sio0: configured irq 4 not in bitmap of probed irqs 0 

sio0: port may not be enabled 

sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0 

sio0: type 16550A 

sio0: [FILTER] 

sio1: configured irq 3 not in bitmap of probed irqs 0 

sio1: port may not be enabled 

sio1: configured irq 3 not in bitmap of probed irqs 0 

sio1: port may not be enabled 

sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 

sio1: type 16550A 

sio1: [FILTER] 

fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0 

fdc0: does not respond 

device_attach: fdc0 attach returned 6 

orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on
isa0 

atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 

atkbd0: <AT Keyboard> irq 1 on atkbdc0 

kbd0 at atkbd0 

atkbd0: [GIANT-LOCKED] 

atkbd0: [ITHREAD] 

ppc0: cannot reserve I/O port range 

sc0: <System console> at flags 0x100 on isa0 

sc0: VGA <16 virtual consoles, flags=0x300> 

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0 

ukbd1: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2>
on uhub1 

kbd3 at ukbd1 

ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2>
on uhub1 

ums0: 5 buttons and Z dir. 

Timecounters tick every 1.000 msec 

hptrr: no controller detected. 

acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462D/DE01> at ata0-master UDMA33 

mfi0: 3000 (253222655s/0x0008/0) - Battery temperature is normal 

mfi0: 3001 (253222655s/0x0008/0) - Current capacity of the battery is
above threshold 

mfid0: <MFI Logical Disk> on mfi0 

mfid0: 557568MB (1141899264 sectors) RAID volume 'AR0' is optimal 

SMP: AP CPU #1 Launched! 

SMP: AP CPU #2 Launched! 

SMP: AP CPU #3 Launched! 

da0 at umass-sim1 bus 1 target 0 lun 0 

da0: <Dell Virtual  Floppy 123> Removable Direct Access SCSI-0 device 

da0: 40.000MB/s transfers 

da0: Attempt to query device size failed: NOT READY, Medium not
present 

cd0 at umass-sim0 bus 0 target 0 lun 0 

cd0: <Dell Virtual  CDROM 123> Removable CD-ROM SCSI-0 device 

cd0: 40.000MB/s transfers 

cd0: Attempt to query device size failed: NOT READY, Medium not
present 

Trying to mount root from ufs:/dev/mfid0s1a 

bce0: link state changed to UP 

logo_saver: the console does not support M_VGA_CG320 

module_register_init: MOD_LOAD (logo_saver, 0xffffffffb49ee010, 0)
error 19 

pid 49887 (try), uid 0: exited on signal 10 (core dumped) 

mfi0: 3002 (253333350s/0x0008/0) - Battery started charging 

mfi0: 3003 (253335170s/0x0008/0) - Battery charge complete 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 

nfs send error 35 for server backup:/back 


More information about the freebsd-current mailing list