7.0-RC2 amd64 SMP Unsupported relocation type at boot

Kernel Jake kerneljake at hotmail.com
Thu Feb 21 04:29:27 UTC 2008


Background: standard install using releases/amd64/ISO-IMAGES/7.0/7.0-RC2-amd64-disc1.iso on a 80GB SATA drive.
Motherboard: Supermicro H8SSL-i with AMIBIOS 8.00.11 2/21/06

Right before the login prompt should appear in multiuser mode, the boot process stops with:

/libexec/ld-elf.so.1: /lib/libedit.so.6: Unsupported relocation type 48886 in non-PLT relocations

If I boot to single user mode and immediately exit the shell, the multiuser boot process completes and the login prompt appears, but the following error appears prior to the login prompt:

/libexec/ld-elf.so.1: /usr/lib/libkrb5.so.9: invalid file format (3 times)
/libexec/ld-elf.so.1: /usr/lib/libssl.so.5: Undefined symbol "i2d_DHparams (2 times)

And then a subsequent command like "man nc" yields:

/libexec/ld-elf.so.1: troff: Shared object has no runtime symbol table.


# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC2 #0: Fri Feb  8 00:02:33 UTC 2008
    root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (1995.02-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f32  Stepping = 2

Features=0x178bfbff
  Features2=0x1
  AMD Features=0xe2500800
  AMD Features2=0x3
  Cores per package: 2
usable memory = 1060904960 (1011 MB)
avail memory  = 1022255104 (974 MB)
ACPI APIC Table: 
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0  irqs 0-15 on motherboard
ioapic1  irqs 16-31 on motherboard
ioapic2  irqs 32-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0:  on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: reservation of 540, 20 (4) failed
acpi0: reservation of 500, 20 (4) failed
acpi0: reservation of 560, 20 (4) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0:  port 0x508-0x50b on acpi0
cpu0:  on acpi0
powernow0:  on cpu0
cpu1:  on acpi0
powernow1:  on cpu1
pcib0:  port 0xcf8-0xcff on acpi0
pci0:  on pcib0
pcib1:  at device 1.0 on pci0
pci1:  on pcib1
pcib2:  at device 13.0 on pci1
pci2:  on pcib2
bge0:  mem 0xfc9f0000-0xfc9fffff irq 24 at device 3.0 on pci2
miibus0:  on bge0
brgphy0:  PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:30:48:58:56:b6
bge0: [ITHREAD]
bge1:  mem 0xfc9e0000-0xfc9effff irq 25 at device 3.1 on pci2
miibus1:  on bge1
brgphy1:  PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:30:48:58:56:b7
bge1: [ITHREAD]
atapci0:  port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xfcafe000-0xfcafffff irq 11 at device 14.0 on pci1
atapci0: [ITHREAD]
ata2:  on atapci0
ata2: [ITHREAD]
ata3:  on atapci0
ata3: [ITHREAD]
atapci1:  port 0xb080-0xb087,0xb000-0xb003,0xac00-0xac07,0xa880-0xa883,0xa800-0xa80f irq 11 at device 14.1 on pci1
atapci1: [ITHREAD]
ata4:  on atapci1
ata4: [ITHREAD]
ata5:  on atapci1
ata5: [ITHREAD]
atapci2:  port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0
ata0:  on atapci2
ata0: [ITHREAD]
ata1:  on atapci2
ata1: [ITHREAD]
isab0:  at device 2.2 on pci0
isa0:  on isab0
ohci0:  port 0xe800-0xe8ff mem 0xfebfd000-0xfebfdfff irq 10 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0:  on ohci0
usb0: USB revision 1.0
uhub0:  on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1:  port 0xd800-0xd8ff mem 0xfebfc000-0xfebfcfff irq 10 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1:  on ohci1
usb1: USB revision 1.0
uhub1:  on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0:  port 0xd400-0xd4ff mem 0xfebfb000-0xfebfbfff irq 10 at device 3.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2:  on ehci0
usb2: USB revision 2.0
uhub2:  on usb2
uhub2: 4 ports with 4 removable, self powered
umass0:  on uhub2
umass0: Get Max Lun not supported (STALLED)
vgapci0:  port 0xe000-0xe0ff mem 0xfd000000-0xfdffffff,0xfebff000-0xfebfffff irq 19 at device 5.0 on pci0
acpi_button0:  on acpi0
acpi_button1:  on acpi0
atkbdc0:  port 0x60,0x64 irq 1 on acpi0
atkbd0:  irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0:  port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0:  port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1:  port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
orm0:  at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0
ppc0: cannot reserve I/O port range
sc0:  at flags 0x100 on isa0
sc0: VGA 
vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: DMA limited to UDMA33, device found non-ATA66 cable
ad4: 76324MB  at ata2-master UDMA33
SMP: AP CPU #1 Launched!
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0:  Removable CD-ROM SCSI-0 device 
cd0: 40.000MB/s transfers
cd0: cd present [256308 x 2048 byte records]
GEOM_LABEL: Label for provider cd0 is iso9660/FreeBSD_Install.
Trying to mount root from ufs:/dev/ad4s1a
bge0: link state changed to UP

_________________________________________________________________
Connect and share in new ways with Windows Live.
http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008


More information about the freebsd-current mailing list