gmirror problem with HP Proliant ML110 G5

[Josep Pujadas i Jubany]

On Fri, 18 Apr 2008 10:56:47 +0200, Ivan Voras wrote
> It looks like a hardware failure, either:
> - bad drive
> - bad cables
> - bad or insufficiently powerful power supply
> 
> What controller are you using?

# pciconf -lv

atapci0 at pci0:0:31:2:    class=0x01018a card=0x31f4103c chip=0x29208086 
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) 4 port Serial ATA Storage 
Controller 1'
    class      = mass storage
    subclass   = ATA
atapci1 at pci0:0:31:5:    class=0x010185 card=0x31f4103c chip=0x29268086 
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage 
Controller 2'
    class      = mass storage
    subclass   = ATA

# atacontrol list

ATA channel 0:
    Master:  ad0 <ST3250620NS/3BJP> Serial ATA v1.0
    Slave:       no device present
ATA channel 1:
    Master:  ad2 <GB0250C8045/HPG1> Serial ATA v1.0
    Slave:       no device present
ATA channel 2:
    Master: acd0 <HL-DT-ST DVD-RAM GSA-H60L/E904> Serial ATA v1.0
    Slave:       no device present
ATA channel 3:
    Master:      no device present
    Slave:       no device present

I installed /usr/ports/sysutils/smartmontools and I performed a long test to 
the disk:

# smartctl -t long /dev/ad2

# smartctl -a /dev/ad2 | more

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 27 -

The disk seems ok. I'm going to try to change the SATA cable, but it is new 
as the disk ...

Regards,

Josep Pujadas