problems with atapicam/atapicd on current

[sam]

hi


I'm using 8-Current on i386. The system has three sata DVD-drives:
	- 1 Optiarc ad-7170s on ata 5
         - 2 Asus e616a3t     on ata 6 & 7

Trying to load atapicam the system halts. Using atapicd only the two
asus drives get recognized.

The chipset is an ich9.

atacontrol list:
ATA channel 0:
     Master:      no device present
     Slave:       no device present
ATA channel 1:
     Master:      no device present
     Slave:       no device present
ATA channel 2:
     Master:  ad4 <WDC WD3200AAKS-00VYA0/12.01B02> Serial ATA II
     Slave:       no device present
ATA channel 3:
     Master:  ad6 <WDC WD3200AAKS-00VYA0/12.01B02> Serial ATA II
     Slave:       no device present
ATA channel 4:
     Master:  ad8 <WDC WD2500KS-00MJB0/02.01C03> Serial ATA II
     Slave:       no device present
ATA channel 5:
     Master:      no device present
     Slave:       no device present
ATA channel 6:
     Master: acd1 <ASUS DVD-E616A3T/1.11> Serial ATA v1.0
     Slave:       no device present
ATA channel 7:
     Master: acd1 <ASUS DVD-E616A3T/1.11> Serial ATA v1.0
     Slave:       no device present


in dmesg I see:
...
atapci0: <Intel AHCI controller> port  
0xe600-0xe607,0xe700-0xe703,0xe800-0xe807,0xe900-0xe903,0xea00-0xea1f mem  
0xfc006000-0xfc0067ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.20 controller with 6 ports PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: setting SRST failed ??
ata5: still BUSY after softreset
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
...
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
...
ad4: 305244MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata2-master SATA300
ad6: 305244MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata3-master SATA300
ad8: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata4-master SATA300
...
ata5: setting SRST failed ??
ata5: still BUSY after softreset
ata5: setting SRST failed ??
ata5: still BUSY after softreset
acd12: DVDROM <ASUS DVD-E616A3T/1.11> at ata6-master SATA150
acd14: DVDROM <ASUS DVD-E616A3T/1.11> at ata7-master SATA150



mfg sam


-- 
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/