em0: watchdog timeout ...
Ihsan Dogan
ihsan at dogan.ch
Tue Oct 30 07:03:57 PDT 2007
on 30.10.2007 14:29 Mike Tancsa said the following:
>> I've got exactly the same problem on a machine, running 7.0-BETA1. The
>> Problem occurs during the boot, when dhclient is trying to get IP. The
>> messages are occuring all the time an it's not possible to use the
>> network card at all.
>> In my case, the network card and the soundcard are sharing an irq. If I
>> don't load the the snd_emu10k1 driver, the network card works perfectly.
> Mine are shared interrupts as well, however, they are shared among the
> nics, so disabling is not an option
>
> % vmstat -i
> interrupt total rate
> irq1: atkbd0 5 0
> irq4: sio0 61332 0
> irq16: em0 1029688695 614
> irq17: em1 em2 em3 775893384 463
> irq19: atapci1 300947 0
> cpu0: timer 3347198272 1997
> cpu1: timer 3347136233 1997
> Total 8500278868 5073
>
>
> em1 is the one having the problems (and yes, I did check the eeprom issue)
>
> em1 at pci1:0:1: class=0x020000 card=0x115e8086 chip=0x105e8086 rev=0x06
> hdr=0x00
> vendor = 'Intel Corporation'
> device = 'PRO/1000 PT'
> class = network
> subclass = ethernet
> cap 01[c8] = powerspec 2 supports D0 D3 current D0
> cap 05[d0] = MSI supports 1 message, 64 bit
> cap 10[e0] = PCI-Express 1 endpoint
>
> its also in FastE mode and not gigE. Not sure if that makes a difference
> or not.
I'm running 1000baseTX. Looks like, that it doesn't depend on that.
Ihsan
--
ihsan at dogan.ch http://blog.dogan.ch/
http://ihsan.dogan.ch/
More information about the freebsd-current
mailing list