msk watchdog timeout

[Kudo Chien]

2007/10/2, Pyun YongHyeon <pyunyh at gmail.com>:
>
> On Mon, Oct 01, 2007 at 10:07:34PM +0800, Kudo Chien wrote:
> > Hi,
> >
> > I've applied the patch. But it seems not solve the problem.
> > After applied patch, mskc0 boot message changes from 'mskc0: [ITHREAD]'
> to
> > 'mskc0: [FILTER]'.
> It just means it uses fast interrupt handler now. Previously you may
> have disabled it.(hw.msk.legacy_intr=1)


Oh I see.

> And one thing I forgot to provide before is that a line in boot message
> > "mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xa000-0xa0ff mem
> > 0xf1000000-0xf1003fff irq 16 at device 0.0 on pci3"
> >
> >
> > I'm not sure if it could be helpful. But if you need any infomation, I
> could
> > provide it.
> > Thanks for your help.
> >
> As I said I don't have this hardware to experiment so it would take
> long time to fix it. I'd like to know chaging PHY driver has any
> effect in your case. Edit /usr/src/sys/dev/mii/e1000phy.c with
> the following.
>
> Save and rebuild kernel. This makes ukphy(4) serve 88E1149 PHY.
> Do you still see the same error from msk(4) after above change?


Yes, the error message is the same after making ukphy(4) serve 88E1149 PHY.
Thanks for your help.

-- 
Best Regards,
Kudo