em0: Unable to locate IO BAR ( two 82542 cards )
Mark Atkinson
atkin901 at yahoo.com
Thu May 10 17:39:42 UTC 2007
I just updated to -current from today on a tyan 2895 (K8WE). I applied the
new nfe MSI/MSIX support patches as well, however I don't think those have
anything to do with the problem below:
FreeBSD 7.0-CURRENT FreeBSD 7.0-CURRENT #5: Thu May 10 10:07:23 PDT 2007
root at k8we:/usr/obj/usr/src/sys/K8WE i386
pci18: <ACPI PCI bus> on pcib5
pci18: physical bus=18
found-> vendor=0x8086, dev=0x1000, revid=0x03
bus=18, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8100000, size 17, enabled
pcib5: requested memory range 0xd8100000-0xd811ffff: good
pcib5: matched entry for 18.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 28
found-> vendor=0x8086, dev=0x1000, revid=0x03
bus=18, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8120000, size 17, enabled
pcib5: requested memory range 0xd8120000-0xd813ffff: good
pcib5: matched entry for 18.9.INTA
pcib5: slot 9 INTA hardwired to IRQ 29
em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.0> mem
0xd8100000-0xd811ffff irq 28 at device 4.0 on pci18
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8100000
em0: Unable to locate IO BAR
em0: Allocation of PCI resources failed
device_attach: em0 attach returned 6
em1: <Intel(R) PRO/1000 Network Connection Version - 6.5.0> mem
0xd8120000-0xd813ffff irq 29 at device 9.0 on pci18
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8120000
em1: Unable to locate IO BAR
em1: Allocation of PCI resources failed
device_attach: em1 attach returned 6
here's the pciconf -v -l output
em0 at pci18:4:0: class=0x020000 card=0x10008086 chip=0x10008086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82542 Gigabit Ethernet Controller'
class = network
subclass = ethernet
em1 at pci18:9:0: class=0x020000 card=0x10008086 chip=0x10008086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82542 Gigabit Ethernet Controller'
class = network
subclass = ethernet
Attached it the bootverbose output for this machine.
--
Mark Atkinson
atkin901 at yahoo.com
(!wired)?(coffee++):(wired);
-------------- next part --------------
OK boot -v -s
/boot/kernel/acpi.ko text=0x519a0 data=0x27e0+0x182c syms=[0x4+0x82f0+0x4+0xac74]
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009b400
SMAP type=02 base=000000000009b400 len=0000000000004c00
SMAP type=02 base=00000000000ce000 len=0000000000032000
SMAP type=01 base=0000000000100000 len=000000007fe00000
SMAP type=03 base=000000007ff00000 len=0000000000011000
SMAP type=04 base=000000007ff11000 len=000000000006f000
SMAP type=02 base=000000007ff80000 len=0000000000080000
SMAP type=02 base=00000000e0000000 len=0000000010000000
SMAP type=02 base=00000000fec00000 len=0000000000000400
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000fff80000 len=0000000000080000
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #5: Thu May 10 10:07:23 PDT 2007
root at marka-k8we.pdsea.f5net.com:/usr/obj/usr/src/sys/K8WE
WARNING: WITNESS option enabled, expect reduced performance.
Using 32 colors for the VM-PQ tuning (1024, 8)
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d3a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0d3a1c0.
Calibrating clock(s) ... i8254 clock: 1193148 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2612048613 Hz
CPU: AMD Opteron(tm) Processor 252 (2612.05-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 2146435072 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x000000007dab3fff, 2091433984 bytes (510604 pages)
avail memory = 2090921984 (1994 MB)
MP Configuration Table version 1.4 found at 0xc009b9a1
Table 'FACP' at 0x7ff10e56
Table 'SPCR' at 0x7ff10eca
Table 'MCFG' at 0x7ff10f1a
Table 'APIC' at 0x7ff10f56
MADT: Found table at 0x7ff10f56
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f7870
bios32: Entry = 0xfd542 (c00fd542) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd540+0x170
pnpbios: Found PnP BIOS data at 0xc00f78f0
pnpbios: Entry = f0000:b65a Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ACPI: RSDP @ 0x0xf78c0/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x7ff0b5a8/0x0038 (v 1 PTLTD RSDT 0x06040000 LTP 0x00000000)
ACPI: FACP @ 0x0x7ff10e56/0x0074 (v 1 NVIDIA CK8S 0x06040000 PTL_ 0x000F4240)
ACPI: DSDT @ 0x0x7ff0b5e0/0x5876 (v 1 NVIDIA CK8 0x06040000 MSFT 0x0100000E)
ACPI: FACS @ 0x0x7ff11fc0/0x0040
ACPI: SPCR @ 0x0x7ff10eca/0x0050 (v 1 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001)
ACPI: MCFG @ 0x0x7ff10f1a/0x003C (v 1 PTLTD MCFG 0x06040000 0x00000000)
ACPI: APIC @ 0x0x7ff10f56/0x0082 (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: BOOT @ 0x0x7ff10fd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xd8000000
MADT: Found IO APIC ID 4, Interrupt 28 at 0xd8001000
MADT: Found IO APIC ID 5, Interrupt 32 at 0xd8400000
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
ioapic3 <Version 1.1> irqs 32-55 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (May 10 2007 10:07:13)
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd9096000 pa 0x89000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80020014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=058000] [hdr=00] is there (id=005e10de)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
AcpiOsDerivePciId: bus 128 dev 1 func 0
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x10de, dev=0x005e, revid=0xa3
bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0051, revid=0xa3
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x8c00, size 10, enabled
found-> vendor=0x10de, dev=0x0052, revid=0xa2
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0, size 5, enabled
map[20]: type I/O Port, range 32, base 0xa000, size 6, enabled
map[24]: type I/O Port, range 32, base 0xa040, size 6, enabled
found-> vendor=0x10de, dev=0x005a, revid=0xa2
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc8000000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \_SB_.PCI0.LUS0:0)
pci_link6: Picked IRQ 20 with weight 0
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 2 INTA routed to irq 20 via \_SB_.PCI0.LUS0
found-> vendor=0x10de, dev=0x005b, revid=0xa3
bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc8001000, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \_SB_.PCI0.LUS2:0)
pci_link7: Picked IRQ 21 with weight 0
ioapic0: Changing polarity for pin 21 to high
pcib0: slot 2 INTB routed to irq 21 via \_SB_.PCI0.LUS2
found-> vendor=0x10de, dev=0x0059, revid=0xa2
bus=0, slot=4, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled
map[14]: type I/O Port, range 32, base 0x1400, size 8, enabled
map[18]: type Memory, range 32, base 0xc8002000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \_SB_.PCI0.LACI:0)
pci_link9: Picked IRQ 22 with weight 0
ioapic0: Changing polarity for pin 22 to high
pcib0: slot 4 INTA routed to irq 22 via \_SB_.PCI0.LACI
found-> vendor=0x10de, dev=0x0053, revid=0xf2
bus=0, slot=6, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0x1c00, size 4, enabled
found-> vendor=0x10de, dev=0x0054, revid=0xf3
bus=0, slot=7, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x1c40, size 3, enabled
map[14]: type I/O Port, range 32, base 0x1c34, size 2, enabled
map[18]: type I/O Port, range 32, base 0x1c38, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x1c30, size 2, enabled
map[20]: type I/O Port, range 32, base 0x1c10, size 4, enabled
map[24]: type Memory, range 32, base 0xc8003000, size 12, enabled
pcib0: matched entry for 0.7.INTA (src \_SB_.PCI0.LTID:0)
pci_link12: Picked IRQ 23 with weight 0
ioapic0: Changing polarity for pin 23 to high
pcib0: slot 7 INTA routed to irq 23 via \_SB_.PCI0.LTID
found-> vendor=0x10de, dev=0x0055, revid=0xf3
bus=0, slot=8, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x1c58, size 3, enabled
map[14]: type I/O Port, range 32, base 0x1c4c, size 2, enabled
map[18]: type I/O Port, range 32, base 0x1c50, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x1c48, size 2, enabled
map[20]: type I/O Port, range 32, base 0x1c20, size 4, enabled
map[24]: type Memory, range 32, base 0xc8004000, size 12, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LSI1:0)
pci_link13: Picked IRQ 20 with weight 1
pcib0: slot 8 INTA routed to irq 20 via \_SB_.PCI0.LSI1
found-> vendor=0x10de, dev=0x005c, revid=0xa2
bus=0, slot=9, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0057, revid=0xa3
bus=0, slot=10, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc8005000, size 12, enabled
map[14]: type I/O Port, range 32, base 0x1c60, size 3, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LMAC:0)
pci_link8: Picked IRQ 21 with weight 1
pcib0: slot 10 INTA routed to irq 21 via \_SB_.PCI0.LMAC
found-> vendor=0x10de, dev=0x005d, revid=0xa3
bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc8000000-0xc8000fff irq 20 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc8000000
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xc8001000-0xc80010ff irq 21 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xc8001000
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
pci0: <multimedia, audio> at device 4.0 (no driver attached)
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=50 devices=0x6<ATAPI_MASTER,ATA_SLAVE>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x1c40-0x1c47,0x1c34-0x1c37,0x1c38-0x1c3f,0x1c30-0x1c33,0x1c10-0x1c1f mem 0xc8003000-0xc8003fff irq 23 at device 7.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c10
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xc8003000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1c40
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1c34
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1c38
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1c30
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x1c58-0x1c5f,0x1c4c-0x1c4f,0x1c50-0x1c57,0x1c48-0x1c4b,0x1c20-0x1c2f mem 0xc8004000-0xc8004fff irq 20 at device 8.0 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c20
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xc8004000
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1c58
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1c4c
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1c50
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1c48
ata5: SATA connect status=00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: no prefetched decode
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0x1c60-0x1c67 mem 0xc8005000-0xc8005fff irq 21 at device 10.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc8005000
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:e0:81:57:d9:ae
nfe0: [MPSAFE]
nfe0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x2000-0x2fff
pcib2: memory decode 0xc8100000-0xc81fffff
pcib2: prefetched decode 0xd0000000-0xd7ffffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x1002, dev=0x5b60, revid=0x00
bus=2, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, enabled
pcib2: requested memory range 0xd0000000-0xd7ffffff: good
map[14]: type I/O Port, range 32, base 0x2000, size 8, enabled
pcib2: requested I/O range 0x2000-0x20ff: in range
map[18]: type Memory, range 32, base 0xc8100000, size 16, enabled
pcib2: requested memory range 0xc8100000-0xc810ffff: good
pcib2: matched entry for 2.0.INTA (src \_SB_.PCI0.LNK3:0)
pci_link2: Picked IRQ 16 with weight 0
ioapic0: Changing polarity for pin 16 to high
pcib2: slot 0 INTA routed to irq 16 via \_SB_.PCI0.LNK3
found-> vendor=0x1002, dev=0x5b70, revid=0x00
bus=2, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc8110000, size 16, enabled
pcib2: requested memory range 0xc8110000-0xc811ffff: good
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xd7ffffff,0xc8100000-0xc810ffff irq 16 at device 0.0 on pci2
vgapci1: <VGA-compatible display> mem 0xc8110000-0xc811ffff at device 0.1 on pci2
pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib3: could not get PCI interrupt routing table for \_SB_.PCI2 - AE_NOT_FOUND
pci16: <ACPI PCI bus> on pcib3
pci16: physical bus=16
found-> vendor=0x1022, dev=0x7450, revid=0x12
bus=16, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=16, slot=10, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 64, base 0xd8000000, size 12, enabled
found-> vendor=0x1022, dev=0x7450, revid=0x12
bus=16, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=16, slot=11, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 64, base 0xd8001000, size 12, enabled
pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci16
pcib4: secondary bus 17
pcib4: subordinate bus 17
pcib4: I/O decode 0xf000-0xfff
pcib4: no prefetched decode
pci17: <ACPI PCI bus> on pcib4
pci17: physical bus=17
pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci16
pcib5: secondary bus 18
pcib5: subordinate bus 18
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xd8100000-0xd81fffff
pcib5: no prefetched decode
pci18: <ACPI PCI bus> on pcib5
pci18: physical bus=18
found-> vendor=0x8086, dev=0x1000, revid=0x03
bus=18, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8100000, size 17, enabled
pcib5: requested memory range 0xd8100000-0xd811ffff: good
pcib5: matched entry for 18.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 28
found-> vendor=0x8086, dev=0x1000, revid=0x03
bus=18, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8120000, size 17, enabled
pcib5: requested memory range 0xd8120000-0xd813ffff: good
pcib5: matched entry for 18.9.INTA
pcib5: slot 9 INTA hardwired to IRQ 29
em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.0> mem 0xd8100000-0xd811ffff irq 28 at device 4.0 on pci18
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8100000
em0: Unable to locate IO BAR
em0: Allocation of PCI resources failed
device_attach: em0 attach returned 6
em1: <Intel(R) PRO/1000 Network Connection Version - 6.5.0> mem 0xd8120000-0xd813ffff irq 29 at device 9.0 on pci18
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8120000
em1: Unable to locate IO BAR
em1: Allocation of PCI resources failed
device_attach: em1 attach returned 6
pcib6: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci128: <ACPI PCI bus> on pcib6
pci128: physical bus=128
found-> vendor=0x10de, dev=0x005e, revid=0xa3
bus=128, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x00d3, revid=0xa3
bus=128, slot=1, func=0
class=05-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[14]: type Memory, range 32, base 0xd8400000, size 12, enabled
found-> vendor=0x10de, dev=0x0057, revid=0xa3
bus=128, slot=10, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd8401000, size 12, enabled
map[14]: type I/O Port, range 32, base 0x3000, size 3, enabled
pcib6: matched entry for 128.10.INTA (src \_SB_.PCI1.LMAC:0)
pci_link22: Picked IRQ 52 with weight 0
ioapic3: Changing polarity for pin 20 to high
pcib6: slot 10 INTA routed to irq 52 via \_SB_.PCI1.LMAC
found-> vendor=0x10de, dev=0x005d, revid=0xa3
bus=128, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pci128: <memory> at device 0.0 (no driver attached)
pci128: <memory> at device 1.0 (no driver attached)
nfe1: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0x3000-0x3007 mem 0xd8401000-0xd8401fff irq 52 at device 10.0 on pci128
nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd8401000
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe1: bpf attached
nfe1: Ethernet address: 00:e0:81:57:d9:af
ioapic3: routing intpin 20 (PCI IRQ 52) to vector 54
nfe1: [MPSAFE]
nfe1: [FILTER]
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci128
pcib7: secondary bus 129
pcib7: subordinate bus 129
pcib7: I/O decode 0xf000-0xfff
pcib7: no prefetched decode
pci129: <ACPI PCI bus> on pcib7
pci129: physical bus=129
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
sio0: irq maps: 0x1ca1 0x1cb1 0x1ca1 0x1ca1
sio0: irq maps: 0x1ca1 0x1cb1 0x1ca1 0x1ca1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio0: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ahc_isa_probe 1: ioport 0x1c00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1ca1 0x1ca1 0x1ca1 0x1ca1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134045 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100463423 hz
Timecounter "TSC" frequency 2612048613 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
DUMMYNET with IPv6 initialized (040826)
ipfw2 (+ipv6) initialized, divert enabled, rule-based forwarding disabled, default to accept, logging disabled
rr232x: no controller detected.
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
acd0: setting PIO4 on nForce CK804 chip
acd0: setting UDMA66 on nForce CK804 chip
acd0: <DVD DC DQ60/MREC> DVDR drive at ata0 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ad1: setting PIO4 on nForce CK804 chip
ad1: setting UDMA100 on nForce CK804 chip
ad1: 19092MB <WDC WD200EB-32CSF0 04.01B04> at ata0-slave UDMA100
ad1: 39102336 sectors [38792C/16H/63S] 16 sectors/interrupt 1 depth queue
ad1: nVidia check1 failed
ad1: Adaptec check1 failed
ad1: LSI (v3) check1 failed
ad1: LSI (v2) check1 failed
ad1: FreeBSD check1 failed
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 238475MB <Seagate ST3250824AS 3.AAE> at ata2-master SATA150
ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
******** ATA nVidia MediaShield Metadata ********
nvidia_id <NVIDIA >
config_size 30
checksum 0x7197901f
version 0x0064
disk_number 0
dummy_0 0x00
total_sectors 488397056
sectors_size 512
serial MIRROR 232.88G
revision
dummy_1 0x00000000
magic_0 0x00640044
magic_1 0x3afc58b55776d67f
magic_2 0x32b8c8890d23f154
flags 0x00
array_width 1
total_disks 2
dummy_2 0x01
type RAID1
dummy_3 0x0000
stripe_sectors 128
stripe_bytes 65536
stripe_shift 7
stripe_mask 0x0000007f
stripe_sizesectors 128
stripe_sizebytes 65536
rebuild_lba 0
dummy_4 0x00000081
dummy_5 0x1d1c5900
status 0x00000001
=================================================
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 238475MB <Seagate ST3250824AS 3.AAE> at ata3-master SATA150
ad6: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
******** ATA nVidia MediaShield Metadata ********
nvidia_id <NVIDIA >
config_size 30
checksum 0x7196901f
version 0x0064
disk_number 1
dummy_0 0x00
total_sectors 488397056
sectors_size 512
serial MIRROR 232.88G
revision
dummy_1 0x00000000
magic_0 0x00640044
magic_1 0x3afc58b55776d67f
magic_2 0x32b8c8890d23f154
flags 0x00
array_width 1
total_disks 2
dummy_2 0x01
type RAID1
dummy_3 0x0000
stripe_sectors 128
stripe_bytes 65536
stripe_shift 7
stripe_mask 0x0000007f
stripe_sizesectors 128
stripe_sizebytes 65536
rebuild_lba 0
dummy_4 0x00000081
dummy_5 0x1d1c5900
status 0x00000001
=================================================
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format nVidia MediaShield
type RAID1
flags 0x01 1<READY>
magic_0 0x3afc58b55776d67f
magic_1 0x32b8c8890d23f154
generation 0
total_sectors 488397056
offset_sectors 0
heads 255
sectors 63
cylinders 30401
width 1
interleave 128
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 488397056
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6: sectors 488397056
=================================================
ar0: 238475MB <nVidia MediaShield RAID1> status: READY
ar0: 488397056 sectors [30401C/255H/63S] <> subdisks defined as:
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 20 to local APIC 0
ioapic0: Assigning PCI IRQ 21 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 0
ioapic3: Assigning PCI IRQ 52 to local APIC 1
GEOM: new disk ad1
GEOM: new disk ad4
GEOM: new disk ad6
GEOM: new disk ar0
Trying to mount root from ufs:/dev/ar0s1a
start_init: trying /sbin/init
Enter full pathname of shell or RETURN for /bin/sh:
More information about the freebsd-current
mailing list