Issues with kernel / userland drivers after recent install and
upgrade
youshi10 at u.washington.edu
youshi10 at u.washington.edu
Sun Jun 3 16:34:20 UTC 2007
On Sun, 3 Jun 2007 youshi10 at u.washington.edu wrote:
> On Sat, 2 Jun 2007 youshi10 at u.washington.edu wrote:
>
>> On Sat, 2 Jun 2007, illoai at gmail.com wrote:
>>
>>> On 01/06/07, youshi10 at u.washington.edu <youshi10 at u.washington.edu> wrote:
<snip>
>>>> pass:
>>>> 1. I have pass compiled into the kernel statically, but /dev/pass* isn't
>>>> created on boot (devfs is running properly I believe).
>>>>
>>>
>>> What SCSI devices do you have?
>>
>> No real SCSI devices on my desktop; just the generic ones like cd, ses, etc.
>> (In addition to those) just ahc on my server, but I don't think I'm going to
>> go upgrading quite yet on my server because I don't want to kill one of my
>> disk's functionality..
>>
<snip>
>> I do WITHOUT_MODULES=* just for speed and to reduce the amount of stuff that
>> gets compiled with buildworld. I figure that everything important should be
>> compiled statically into the kernel, but then again that's me, and since my
>> server/desktop aren't production machines I can take them down whenever I
>> need to modify the kernel.
>
> Yes, that's most likely true about the lag, but why did it used to load and now
> it doesn't >_>???
<snip>
> Well, I did. It turns out a lot of that got deleted when I ran make delete-old,
> which begs the question is usbd obsolete in 7-CURRENT?
After doing some researching, yes usbd(8) was made obsolete in favor of devd(8). So, that part of the question's answered, and appears to be in shape, but the device nodes still aren't being detected properly under 7-CURRENT (they were being detected properly under 6.2-RELEASE).
A printout of /dev along with my dmesg is attached.
> According to usbdevs I don't have any devices attached, whatsoever (other than
> USB hubs):
>
> [root at optimus /home/gcooper]# usbdevs -vd
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x0000)
> , rev 1.00
> uhub0
> port 1 powered
> port 2 powered
> Controller /dev/usb1:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x0000)
> , rev 1.00
> uhub1
> port 1 powered
> port 2 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x0000)
> , rev 1.00
> uhub2
> port 1 powered
> port 2 powered
> usbdevs: /dev/usb3: Input/output error
> Controller /dev/usb4:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> Intel(0x0000)
> , rev 1.00
> uhub4
> port 1 enabled
> port 2 enabled
> port 3 enabled
> port 4 enabled
> port 5 enabled
> port 6 enabled
> port 7 enabled
> port 8 enabled
>
> I really wonder what /dev/usb3 and /dev/usb4 map to. Any ideas how to get this
> info?
>
>>> % dmesg -a | grep hci
>>> perhaps?
>>
>> I'll check on that again, but all I saw with an OHCI in it was the firewire
>> stuff IIRC (something about Texas instruments, FWOHCI, etc).
>
> ehci and uhci are loaded (guess my MB doesn't support ohci).
>
> FWOHCI is just the TI onboard firewire controller.
>
> Thanks, and any suggestions and ideas are more than welcome and greatly
> appreciated :),
>
> -Garrett
For now I suppose my only workaround is to go buy a PS/2 keyboard, but it seems kind of silly given the circumstances. However, I need to work on my SoC project in a native environment, so desperate times call for desperate measures.
-Garrett
-------------- next part --------------
total 1
crw-r----- 1 root operator 0, 68 Jun 3 09:11 acd0
crw-r----- 1 root operator 0, 69 Jun 3 09:11 acd0t01
crw-r--r-- 1 root wheel 0, 29 Jun 3 09:11 acpi
crw-r----- 1 root operator 0, 70 Jun 3 09:11 ad10
crw-r----- 1 root operator 0, 72 Jun 3 09:11 ad10s1
crw-r----- 1 root operator 0, 73 Jun 3 09:11 ad10s2
crw-r----- 1 root operator 0, 77 Jun 3 02:11 ad10s2a
crw-r----- 1 root operator 0, 78 Jun 3 02:11 ad10s2b
crw-r----- 1 root operator 0, 79 Jun 3 09:11 ad10s2c
crw-r----- 1 root operator 0, 80 Jun 3 02:11 ad10s2d
crw-r----- 1 root operator 0, 81 Jun 3 02:11 ad10s2e
crw-r----- 1 root operator 0, 82 Jun 3 02:11 ad10s2f
crw-r----- 1 root operator 0, 83 Jun 3 02:11 ad10s2g
crw-r----- 1 root operator 0, 71 Jun 3 09:11 ad12
crw-r----- 1 root operator 0, 74 Jun 3 09:11 ad12s1
crw-r----- 1 root operator 0, 75 Jun 3 09:11 ad12s2
crw-r----- 1 root operator 0, 76 Jun 3 09:11 ad12s3
crw------- 1 root operator 0, 28 Jun 3 09:11 ata
crw------- 1 root wheel 0, 42 Jun 3 09:11 atkbd0
crw------- 1 root wheel 0, 88 Jun 3 09:12 bpf0
crw-rw-rw- 1 root wheel 0, 45 Jun 3 09:11 bpsm0
crw------- 1 root wheel 0, 20 Jun 3 09:12 console
crw------- 1 root wheel 0, 62 Jun 3 09:11 consolectl
crw-rw-rw- 1 root wheel 0, 22 Jun 3 09:11 ctty
crw------- 1 root wheel 0, 4 Jun 3 09:11 devctl
cr-------- 1 root wheel 0, 67 Jun 3 09:11 devstat
lrwxr-xr-x 1 root wheel 12 Jun 3 02:11 dumpdev -> /dev/ad10s2b
dr-xr-xr-x 2 root wheel 512 Jun 3 09:11 fd
crw------- 1 root wheel 0, 26 Jun 3 09:11 fido
lrwxr-xr-x 1 root wheel 5 Jun 3 09:11 fw0 -> fw0.0
crw-rw---- 1 root operator 0, 38 Jun 3 09:11 fw0.0
lrwxr-xr-x 1 root wheel 8 Jun 3 09:11 fwmem0 -> fwmem0.0
crw-rw---- 1 root operator 0, 39 Jun 3 09:11 fwmem0.0
crw-r----- 1 root operator 0, 5 Jun 3 09:11 geom.ctl
crw------- 1 root wheel 0, 27 Jun 3 09:11 io
lrwxr-xr-x 1 root wheel 6 Jun 3 09:11 kbd0 -> atkbd0
lrwxr-xr-x 1 root wheel 7 Jun 3 09:11 kbd1 -> kbdmux0
crw------- 1 root wheel 0, 6 Jun 3 09:11 kbdmux0
crw------- 1 root wheel 0, 10 Jun 3 09:11 klog
crw-r----- 1 root kmem 0, 9 Jun 3 09:11 kmem
lrwxr-xr-x 1 root wheel 12 Jun 3 09:12 log -> /var/run/log
crw------- 1 root wheel 0, 66 Jun 3 09:11 mdctl
crw-r----- 1 root kmem 0, 8 Jun 3 09:11 mem
dr-xr-xr-x 2 root wheel 512 Jun 3 09:11 net
lrwxr-xr-x 1 root wheel 8 Jun 3 09:11 net1 -> net/msk0
lrwxr-xr-x 1 root wheel 7 Jun 3 09:11 net2 -> net/lo0
crw------- 1 root wheel 0, 3 Jun 3 09:11 network
crw------- 1 root wheel 0, 63 Jun 3 09:11 nfs4
crw------- 1 root kmem 0, 11 Jun 3 09:11 nfslock
crw-rw-rw- 1 root wheel 0, 18 Jun 3 09:23 null
crw-r--r-- 1 root wheel 0, 21 Jun 3 09:11 pci
crw-rw-rw- 1 root wheel 0, 44 Jun 3 09:11 psm0
crw-rw-rw- 1 root wheel 0, 90 Jun 3 09:29 ptyp0
crw-rw-rw- 1 root wheel 0, 23 Jun 3 02:11 random
lrwxr-xr-x 1 root wheel 4 Jun 3 09:11 stderr -> fd/2
lrwxr-xr-x 1 root wheel 4 Jun 3 09:11 stdin -> fd/0
lrwxr-xr-x 1 root wheel 4 Jun 3 09:11 stdout -> fd/1
crw------- 1 root wheel 0, 25 Jun 3 09:11 sysmouse
crw--w---- 1 gcooper tty 0, 91 Jun 3 09:29 ttyp0
crw------- 1 root wheel 0, 46 Jun 3 09:12 ttyv0
crw------- 1 root wheel 0, 47 Jun 3 09:12 ttyv1
crw------- 1 root wheel 0, 48 Jun 3 09:12 ttyv2
crw------- 1 root wheel 0, 49 Jun 3 09:12 ttyv3
crw------- 1 root wheel 0, 50 Jun 3 09:12 ttyv4
crw------- 1 root wheel 0, 51 Jun 3 09:12 ttyv5
crw------- 1 root wheel 0, 52 Jun 3 09:12 ttyv6
crw------- 1 root wheel 0, 53 Jun 3 09:12 ttyv7
crw------- 1 root wheel 0, 54 Jun 3 09:11 ttyv8
crw------- 1 root wheel 0, 55 Jun 3 09:11 ttyv9
crw------- 1 root wheel 0, 56 Jun 3 09:11 ttyva
crw------- 1 root wheel 0, 57 Jun 3 09:11 ttyvb
crw------- 1 root wheel 0, 58 Jun 3 09:11 ttyvc
crw------- 1 root wheel 0, 59 Jun 3 09:11 ttyvd
crw------- 1 root wheel 0, 60 Jun 3 09:11 ttyve
crw------- 1 root wheel 0, 61 Jun 3 09:11 ttyvf
lrwxr-xr-x 1 root wheel 6 Jun 3 09:11 urandom -> random
crw-rw---- 1 root operator 0, 33 Jun 3 09:11 usb
crw-rw---- 1 root operator 0, 32 Jun 3 09:11 usb0
crw-rw---- 1 root operator 0, 34 Jun 3 09:11 usb1
crw-rw---- 1 root operator 0, 35 Jun 3 09:11 usb2
crw-rw---- 1 root operator 0, 36 Jun 3 09:11 usb3
crw-rw---- 1 root operator 0, 37 Jun 3 09:11 usb4
crw------- 1 root operator 0, 84 Jun 3 09:11 xpt0
crw-rw-rw- 1 root wheel 0, 19 Jun 3 09:11 zero
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #14: Sun Jun 3 08:46:33 PDT 2007
gcooper at optimus:/usr/obj/usr/src/sys/OPTIMUS
WARNING: WITNESS option enabled, expect reduced performance.
ACPI APIC Table: <MSTEST OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz (2666.68-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4286263296 (4087 MB)
avail memory = 4085649408 (3896 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd0 at kbdmux0
acpi0: <\M^?\M^?\M^?\M^?\M^?\M^? \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?> on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9c00-0x9c7f mem 0xf5000000-0xf5ffffff,0xc0000000-0xcfffffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xf63fe000-0xf63fffff irq 16 at device 0.0 on pci3
atapci0: [ITHREAD]
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xa800-0xa8ff mem 0xf62fc000-0xf62fffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x02> on mskc0
msk0: Ethernet address: 00:1a:92:f0:57:50
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc0: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
device_attach: uhub3 attach returned 6
usb3: port 0, set config at addr 1 failed
usb3: root hub problem, error=4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <multimedia> at device 1.0 (no driver attached)
pci5: <multimedia, audio> at device 2.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfe7ff800-0xfe7fffff,0xfe7f8000-0xfe7fbfff irq 21 at device 3.0 on pci5
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:01:41:91:c4
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci1
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci1
ata8: [ITHREAD]
ata9: <ATA channel 4> on atapci1
ata9: [ITHREAD]
ata10: <ATA channel 5> on atapci1
ata10: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xcd000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorpCD/DVDW TS-H552U/US06> at ata4-master PIO4
ad10: 76293MB <WDC WD800JD-75HKA1 14.03G14> at ata5-master SATA150
ad12: 305245MB <WDC WD3200AAJS-00RYA0 12.01B01> at ata6-master SATA300
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad10s2a
msk0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 2 0 2 0 0 0 done
All buffers synced.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #15: Sun Jun 3 09:10:14 PDT 2007
gcooper at optimus:/usr/obj/usr/src/sys/OPTIMUS
WARNING: WITNESS option enabled, expect reduced performance.
ACPI APIC Table: <MSTEST OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz (2666.68-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4286210048 (4087 MB)
avail memory = 4085596160 (3896 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <\M^?\M^?\M^?\M^?\M^?\M^? \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?> on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9c00-0x9c7f mem 0xf5000000-0xf5ffffff,0xc0000000-0xcfffffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xf63fe000-0xf63fffff irq 16 at device 0.0 on pci3
atapci0: [ITHREAD]
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xa800-0xa8ff mem 0xf62fc000-0xf62fffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x02> on mskc0
msk0: Ethernet address: 00:1a:92:f0:57:50
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc0: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
device_attach: uhub2 attach returned 6
usb2: port 0, set config at addr 1 failed
usb2: root hub problem, error=4
uhci3: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
device_attach: uhub3 attach returned 6
usb3: port 0, set config at addr 1 failed
usb3: root hub problem, error=4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
device_attach: uhub4 attach returned 6
usb4: port 0, set config at addr 1 failed
usb4: root hub problem, error=4
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <multimedia> at device 1.0 (no driver attached)
pci5: <multimedia, audio> at device 2.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfe7ff800-0xfe7fffff,0xfe7f8000-0xfe7fbfff irq 21 at device 3.0 on pci5
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:01:41:91:c4
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci1
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci1
ata8: [ITHREAD]
ata9: <ATA channel 4> on atapci1
ata9: [ITHREAD]
ata10: <ATA channel 5> on atapci1
ata10: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xcd000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorpCD/DVDW TS-H552U/US06> at ata4-master PIO4
ad10: 76293MB <WDC WD800JD-75HKA1 14.03G14> at ata5-master SATA150
ad12: 305245MB <WDC WD3200AAJS-00RYA0 12.01B01> at ata6-master SATA300
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad10s2a
msk0: link state changed to UP
More information about the freebsd-current
mailing list