CFT: major wireless changes
David Wolfskill
david at catwhisker.org
Sat Jun 2 02:17:43 UTC 2007
On Fri, Jun 01, 2007 at 06:30:02PM -0700, David Wolfskill wrote:
> ...
> Summmary:
>
> * ifconfig dumped core; not sure why, and debug version doesn't.
> * wi(4) device didn't associate; will poke around and see if I
> can figure out what's broken -- it may just be something I
> need to tweak in my script.
After loading everry kernel module that looked possibly relevant:
d146(7.0-C)[12] kldstat
Id Refs Address Size Name
1 20 0xc0400000 86f700 kernel
2 1 0xc0c70000 283ac linux.ko
3 1 0xc0c99000 69c24 acpi.ko
4 1 0xc473a000 21000 radeon.ko
5 1 0xc475b000 f000 drm.ko
6 1 0xc4c36000 3000 wlan_scan_ap.ko
7 1 0xc4c39000 2000 wlan_xauth.ko
8 1 0xc4c3b000 3000 wlan_acl.ko
9 1 0xc4c3e000 5000 wlan_scan_sta.ko
d146(7.0-C)[13]
and issuing the same commands the script did (by hand) and verifying
exit code 0 from each, and still seeing "no carrier":
d146(7.0-C)[13] ifconfig wi0
wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 00:02:2d:5b:2c:78
media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps)
status: no carrier
ssid lmdhw-net channel 2 (2417 Mhz 11b)
stationname 0x4c414e2f49454545206e6f64650000003a6920c0a0fd0508b3dc
authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit txpowmax 100
bmiss 7 scanvalid 60 bintval 100
d146(7.0-C)[14]
I plugged in the PCcard ed(4) device [note -- not "de(4)," as I
previously reported) and re-ran the script:
d146(7.0-C)[14] sudo sh /usr/local/etc/rc.d/nic_init faststart
...
DHCPREQUEST on ed1 to 255.255.255.255 port 67
DHCPACK from 172.16.8.1
bound to 172.16.8.146 -- renewal in 302400 seconds.
d146(7.0-C)[15] ifconfig wi0
wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:02:2d:5b:2c:78
media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps)
status: associated
ssid lmdhw-net channel 2 (2417 Mhz 11b) bssid 00:04:5a:cd:d4:17
stationname 0x4c414e2f49454545206e6f64650000003a6920c0a0fd0508b3dc
authmode OPEN privacy MIXED deftxkey 1 wepkey 1:40-bit txpowmax 100
bmiss 7 scanvalid 60 bintval 100
d146(7.0-C)[16] ifconfig ed1
ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:40:05:0a:17:33
inet 172.16.8.146 netmask 0xffffff00 broadcast 172.16.8.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
d146(7.0-C)[17]
Huh? Why would poking at ed1 change anything in wi0??!?
I tried pulling the ed1 devvice out (afterward) and running the script
again, but the result is still (or is that "again?") "no carrier."
> * an(4) associates, but appears to "hang" for several seconds
> every once in a while.
> * Wired devices I used for reality checks (xl(4) and de(4))
> seem OK,but I didn't actually try using them for traffic yet.
I tried the xl0 and ed1 devices, they appear to work without anything
special, as expected.
Peace,
david
--
David H. Wolfskill david at catwhisker.org
Anything and everything is a (potential) cat toy.
See http://www.catwhisker.org/~david/publickey.gpg for my public key.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 195 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20070602/a33f8055/attachment.pgp
More information about the freebsd-current
mailing list