bge/BCM5704 crashes current
TAC-TAC computer s.r.o.
jmadle at tac-tac.cz
Fri Jul 20 12:01:55 UTC 2007
Hi,
I have similar same problem with MB SuperMicro H8SSL-R10 - Dual port
Broadcom BCM5704C.
System hangs during boot/ifconfig.
Jiri Madle
#uname -a
FreeBSD hell.tac-tac.cz 7.0-CURRENT FreeBSD 7.0-CURRENT #3: Sun Jul 15
13:51:34 CEST 2007 root at hell.tac-tac.cz:/usr/obj/usr/src/sys/TACTAC
amd64
#############################################################
Danny Braniss danny at cs.huji.ac.il
Tue Jul 3 12:54:43 UTC 2007
Previous message: Panic in ipfw
Next message: Panic in ipfw
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Hi,
I trying out an IBM X3455 which has 2 Broadcom BCM5704.
they work ok under -stable, but -current just reboots without a trace,
no panic, no nothing - actually some garbage on the serial port.
I tried wit/and without msi.
this is what i get under -stable:
bge0 at pci2:1:0: class=0x020000 card=0x02a61014 chip=0x164814e4 rev=0x10
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5704 NetXtreme Dual Gigabit Adapter'
class = network
subclass = ethernet
cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split
transaction
cap 01[48] = powerspec 2 supports D0 D3 current D0
cap 03[50] = VPD
cap 05[58] = MSI supports 8 messages, 64 bit
bge1 at pci2:1:1: class=0x020000 card=0x02a61014 chip=0x164814e4 rev=0x10
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5704 NetXtreme Dual Gigabit Adapter'
class = network
subclass = ethernet
cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split
transaction
cap 01[48] = powerspec 2 supports D0 D3 current D0
cap 03[50] = VPD
cap 05[58] = MSI supports 8 messages, 64 bit
More information about the freebsd-current
mailing list