arcmsr crash

[Matt Reimer]

On 7/13/07, Scott Long <scottl at samsco.org> wrote:
> Matt Reimer wrote:
> > On 7/13/07, John Baldwin <jhb at freebsd.org> wrote:
> >> On Tuesday 05 June 2007 05:22:38 pm Matt Reimer wrote:
> >> > Once a week or so we're seeing a panic with a -current kernel built
> >> > just before the gcc 4.2 import (maybe three weeks ago). The box has a
> >> > Supermicro X7DBE/X7DBE+ motherboard with two Xeon 5160s, 16G RAM, and
> >> > an Areca 1220 controller with eight 500G disks connected.
> >> >
> >> > Does this indicate that the arcmsr driver is at fault:
> >> >
> >> > Tracing command irq16: arcmsr0 pid 26 tid 100018 td 0xffffff040fc5b000
> >> > cpustop_handler() at cpustop_handler+0x35
> >> > ipi_nmi_handler() at ipi_nmi_handler+0x2e
> >> > trap() at trap+0x365
> >> > nmi_calltrap() at nmi_calltrap+0x8
> >> > --- trap 0x13, rip = 0xffffffff8041ab11, rsp = 0xffffffffab59eff0, rbp
> >> > = 0xffffffffac0a37d0 ---
> >> > siocnclose() at siocnclose+0x21
> >> > sio_cnputc() at sio_cnputc+0x89
> >> > cnputc() at cnputc+0x6a
> >> > putchar() at putchar+0x5f
> >> > kvprintf() at kvprintf+0xd45
> >> > printf() at printf+0xe1
> >> > panic() at panic+0x145
> >> > xpt_done() at xpt_done+0x14a
> >> > arcmsr_interrupt() at arcmsr_interrupt+0x2df
> >> > ithread_loop() at ithread_loop+0x108
> >> > fork_exit() at fork_exit+0xaa
> >> > fork_trampoline() at fork_trampoline+0xe
> >> > --- trap 0, rip = 0, rsp = 0xffffffffac0a3d30, rbp = 0 ---
> >>
> >> Looks like it has panic'd here:
> >>
> >>                 switch (done_ccb->ccb_h.path->periph->type) {
> >>                 case CAM_PERIPH_BIO:
> >>                         mtx_lock(&cam_bioq_lock);
> >>                         TAILQ_INSERT_TAIL(&cam_bioq, &done_ccb->ccb_h,
> >>                                           sim_links.tqe);
> >>                         done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX;
> >>                         mtx_unlock(&cam_bioq_lock);
> >>                         swi_sched(cambio_ih, 0);
> >>                         break;
> >>                 default:
> >>                         panic("unknown periph type %d",
> >>                             done_ccb->ccb_h.path->periph->type);
> >>                 }
> >>
> >> which should seem to indicate that, yes, it is a driver bug.
> >
> > That code in -CURRENT looks a bit different (cam_simq_lock instead of
> > cam_bioq_lock, etc.). Is that relevant to your analysis?
> >
> > Matt
>
> The locking is different, but the problem is basically the same.  Are
> you using 7-CURRENT or 6.x?

7-CURRENT from right before the gcc upgrade.

Matt