7.0-CURRENT-200611-amd64 on (SiS 761GX + SiS 966)-based motherboard

[John Baldwin]

On Tuesday 09 January 2007 02:49, Alexander Pohoyda wrote:
> Hello!
> 
> I've tried the 2006-11 snapshot today and it hangs right after the
> message:
> ...
> pcib0: <ACPI Host-PCI bridge> port ... on apic0
> pci0: <ACPI PCI bus> on pcib0
> 
> With ACPI disabled, it hangs with this message:
> ...
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> 
> Booting in "Safe Mode" has no effect, hangs just like with disabled
> ACPI.
> 
> Booting in verbose logging mode gives this:
> ...
> pcib0: matched entry for 0.4.INTA
> pcib0: slot 4 INTA hardwired to IRQ 19
> found-> vendor=0x1039, dev=0x1183, revid=0x02
>         bus=0, slot=5, func=0
>         class=01-01-85, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=11
>         powerspec 2  supports D) D3 current D0
>         map[10]:  type 4, range 32, base 0xfc00, size  3, enabled
>         map[14]:  type 4, range 32, base 0xfb00, size  2, enabled
>         map[18]:  type 4, range 32, base 0xfa00, size  3, enabled
>         map[1c]:  type 4, range 32, base 0xf900, size  2, enabled
>         map[20]:  type 4, range 32, base 0xf800, size  4, enabled
>         map[24]:  type 4, range 32, base 0xf700, size  7, enabled
> pcib0: matched entry for 0.5.INTA
> pcib0: slot 5 INTA hardwired to IRQ 17
> 
> 
> FreeBSD 5.4 works OK, FreeBSD 6.2 installs perfectly from CD, but when
> boots from the harddrive, it is very slow (unlocks by pressing NumLock
> key or moving the mouse, very weird).
> 
> It might be unrelated, but NetBSD-amd64 hangs with this:
> pciide0:0:0: lost interrupt
>          type: ata tc_bcount: 512 tc_skip: 0
> uhub1: device problem, disabling port 2
> 
> 
> 
> If that is of interest to you, I could try to provide more information.

Try hacking the source to turn off VPD.

-- 
John Baldwin