Areca weirdness
Scott Long
scottl at samsco.org
Mon Dec 10 08:43:05 PST 2007
For the Areca driver, it's harmless. I still haven't narrowed
down the actual problem, unfortunately.
Scott
Philip Murray wrote:
> Hi,
>
> After the recent commit of the new Areca (arcmsr) driver, I get this
> output during boot:
>
> arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable)
> > mem 0xfc7ff000-0xfc7fffff,0xfc000000-0xfc3fffff irq 31 at device 14.0
> on pci2
> ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
> ARECA RAID ADAPTER0: FIRMWARE VERSION V1.43 2007-4-17
> arcmsr0: [ITHREAD]
>
> .... snip ....
>
> Waiting 5 seconds for SCSI devices to settle
> (probe16:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step
> ^^^ This line here ^^^
>
> da0 at arcmsr0 bus 0 target 0 lun 0
> da0: <Areca ARC-1120-VOL#00 R001> Fixed Direct Access SCSI-5 device
> da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
> da0: 76293MB (156248064 512 byte sectors: 255H 63S/T 9725C)
> da1 at arcmsr0 bus 0 target 0 lun 1
> da1: <Areca ARC-1120-VOL#01 R001> Fixed Direct Access SCSI-5 device
> da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
> da1: 2784727MB (5703121920 512 byte sectors: 255H 63S/T 355002C)
>
>
> Not sure if it's anything to worry about (as I have no idea what it
> means), but doesn't seem to affect functionality at all
>
> Cheers
>
> Phil
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
More information about the freebsd-current
mailing list