nfe(4) not working on asus m2n32sli-deluxe

[Craig Rodrigues]

On Fri, Aug 31, 2007 at 02:58:54PM -0300, Mario Ferreira wrote:
> asus m2n32sli-deluxe wifi edition but I had some issues:
> 
>  1) on board wlan adapter RTL8187_Wireless not supported
>  2) on board lan adapter NForce 590 SLI MCP does not work
> 
>   The lack of support for RTL8187_Wireless is not a problem for now.
> However, the NForce 590 SLI MCP Gigabit adapter is an issue.

Hi,

I just bought the exact same motherboard as you,
and it works great.  I do not have any issues with the 
Gigabit adapter.

nfe0 at pci0:16:0: class=0x068000 card=0xcb841043 chip=0x037310de rev=0xa2 hdr=0x00
nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
        ether 00:1b:fc:62:b3:68
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active

There are some BIOS settings related to "LAN Cable Status" that you
might want to fiddle with.

If you have further problems, you can follow up with me directly.

--
Craig Rodrigues
rodrigc at crodrigues.org

-------------- next part --------------
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at device 16.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000
nfe0: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfe029000
nfe0: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfe028000
nfe0: attempting to allocate 8 MSI-X vectors (8 supported)
nfe0: using IRQs 256-263 for MSI-X
nfe0: Using 8 MSIX messages
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:1b:fc:62:b3:68
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at device 17.0 on pci0
nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe027000
nfe1: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfe026000
nfe1: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfe025000
nfe1: attempting to allocate 8 MSI-X vectors (8 supported)
nfe1: using IRQs 264-271 for MSI-X
nfe1: Using 8 MSIX messages
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe1: bpf attached
nfe1: Ethernet address: 00:1b:fc:62:be:56
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]