Consoles go blank after loading X with GM965
Don Hinton
hintonda at gmail.com
Sat Aug 11 18:27:46 PDT 2007
Hi:
I have an Intel GM965 SVGA adapter, and when I load snd_hda in
/boot/loader.conf, I loose the ability to ctrl-alt-fn to any of my
consoles after starting xfce--I have keyboard, but the console screens
goes blank. This happens on both 7.0-current and 6.2-stable, and with
a plain startx, kde, and xfce.
However, if I wait to load snd_hda until after apci gets loaded (which
seems to be the only thing that matters), I don't have the problem,
i.e., I can ctrl-alt-fn to other consoles. The only other odd thing
is that I compiled vesa into the kernel, and see VESA: set_mode():
24(18) -> 24(18) written to the console everytime I switch from X.
I don't have any idea what's going on, but figured passing this along
might help someone more knowledgable.
thanks...
don
$ uname -a
FreeBSD localhost 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Wed Aug 8 22:06:24 UTC 2007 root@:/usr/obj/usr/src/sys/HP_SMP i386
$ cat /boot/loader.conf
debug.acpi.disabled="sysresource"
$ dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Wed Aug 8 22:06:24 UTC 2007
root@:/usr/obj/usr/src/sys/HP_SMP
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (2194.77-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fa Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2137849856 (2038 MB)
avail memory = 2082467840 (1985 MB)
ACPI APIC Table: <HP 30D5 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf8000000-0xf80fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf8100000-0xf81fffff at device 2.1 on pci0
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf8704800-0xf8704bff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib3
re0: <RealTek 8101E PCIe 10/100baseTX> port 0x3000-0x30ff mem 0xf8300000-0xf8300fff irq 17 at device 0.0 on pci6
re0: Using 2 MSI messages
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: Ethernet address: 00:1b:24:6d:22:97
re0: [FILTER]
re0: [FILTER]
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf8704c00-0xf8704fff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
ugen0: <Chicony Electronics Co., Ltd. HP Webcam, class 239/2, rev 2.00/6.06, addr 2> on uhub6
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib4
fwohci0: <1394 Open Host Controller Interface> mem 0xf8400000-0xf84007ff irq 20 at device 9.0 on pci7
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:24:1b:00:f0:02:38:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:24:1b:02:38:00
fwe0: Ethernet address: 02:24:1b:02:38:00
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:24:1b:00:f0:02:38:00 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7d060000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci7: <base peripheral> at device 9.1 (no driver attached)
pci7: <base peripheral> at device 9.2 (no driver attached)
pci7: <base peripheral> at device 9.3 (no driver attached)
pci7: <base peripheral> at device 9.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH8M SATA300 controller> port 0x1c00-0x1c07,0x18d4-0x18d7,0x18d8-0x18df,0x18d0-0x18d3,0x18e0-0x18ff mem 0xf8704000-0xf87047ff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (-72.6C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <PIONEER DVDRW DVR-K17/1.05> at ata0-master PIO4
ad4: 95396MB <Seagate ST910021AS 3.13> at ata2-master SATA150
ad8: 95396MB <Seagate ST910021AS 3.13> at ata4-master SATA150
GEOM_LABEL: Label for provider ad4s1 is ntfs/OS.
GEOM_LABEL: Label for provider ad4s2 is ntfs/HP_RECOVERY.
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad4s3a
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xf8700000-0xf8703fff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcm0: <HDA Codec: Realtek ALC268>
pcm0: <HDA Driver Revision: 20070710_0047>
VESA: set_mode(): 24(18) -> 24(18)
$ cat /root/kernels/HP_SMP |sed -E -n -f /usr/src/sys/conf/makeLINT.sed
cpu I686_CPU
ident HP_SMP
makeoptions DEBUG=-g
options SCHED_4BSD
options PREEMPTION
options INET
options INET6
options SCTP
options FFS
options SOFTUPDATES
options UFS_ACL
options UFS_DIRHASH
options UFS_GJOURNAL
options MD_ROOT
options NFSCLIENT
options NFSSERVER
options NFS_ROOT
options MSDOSFS
options CD9660
options PROCFS
options PSEUDOFS
options GEOM_PART_GPT
options GEOM_LABEL
options COMPAT_43TTY
options COMPAT_FREEBSD4
options COMPAT_FREEBSD5
options COMPAT_FREEBSD6
options SCSI_DELAY=5000
options KTRACE
options SYSVSHM
options SYSVMSG
options SYSVSEM
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV
options ADAPTIVE_GIANT
options STOP_NMI
options AUDIT
options KDB
options DDB
options GDB
options INVARIANTS
options INVARIANT_SUPPORT
options WITNESS
options WITNESS_SKIPSPIN
options SMP
device apic
device cpufreq
device eisa
device pci
device fdc
device ata
device atadisk
device ataraid
device atapicd
device atapifd
device atapist
options ATA_STATIC_ID
device ahb
device ahc
options AHC_REG_PRETTY_PRINT
device ahd
options AHD_REG_PRETTY_PRINT
device amd
device hptiop
device isp
device mpt
device sym
device trm
device adv
device adw
device aha
device aic
device bt
device ncv
device nsp
device stg
device scbus
device ch
device da
device sa
device cd
device pass
device ses
device amr
device arcmsr
device asr
device ciss
device dpt
device hptmv
device rr232x
device iir
device ips
device mly
device twa
device aac
device aacp
device ida
device mfi
device mlx
device pst
device twe
device atkbdc
device atkbd
device psm
device kbdmux
device vga
device splash
device sc
device agp
options VESA
options VESA_DEBUG
options VGA_DEBUG
device drm
device pmtimer
device cbb
device pccard
device cardbus
device sio
device uart
device ppc
device ppbus
device lpt
device plip
device ppi
device de
device em
device ixgb
device le
device txp
device vx
device miibus
device bce
device bfe
device bge
device dc
device fxp
device lge
device msk
device nfe
device nge
device pcn
device re
device rl
device sf
device sis
device sk
device ste
device stge
device ti
device tl
device tx
device vge
device vr
device wb
device xl
device cs
device ed
device ex
device ep
device fe
device ie
device sn
device xe
device wlan
device wlan_wep
device wlan_ccmp
device wlan_tkip
device wlan_amrr
device wlan_scan_ap
device wlan_scan_sta
device an
device ath
device ath_hal
device ath_rate_sample
device awi
device ral
device wi
device loop
device random
device ether
device sl
device ppp
device tun
device pty
device md
device gif
device faith
device firmware
device bpf
device uhci
device ohci
device ehci
device usb
device ugen
device uhid
device ukbd
device ulpt
device umass
device ums
device ural
device rum
device urio
device uscanner
device aue
device axe
device cdce
device cue
device kue
device rue
device firewire
device sbp
device fwe
device fwip
device dcons
device dcons_crom
More information about the freebsd-current
mailing list