can not set channel on wi card in hostap
JoaoBR
joao at matik.com.br
Fri Aug 10 17:39:22 PDT 2007
I can not set the channel when running the wi card in hostap mode, it seems to
be blocked on channel 3
it is a prism card which is ok and just worked minutes before on releng_6
I tried channel as channel id or freq with and without :b, no chance
it is not a display erro, the stations are definitly connected at channel 3
wicontrol gives me with any option
wicontrol: SIOCGWAVELAN: Invalid argument
wi0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 00:02:6f:3a:98:b3
media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11b <hostap>
(DS/2Mbps <hostap>)
status: associated
ssid CS channel 3 (2422 Mhz 11b) bssid 00:02:6f:3a:98:b3
stationname AP-C
authmode OPEN privacy MIXED deftxkey 1
wepkey 1:40-bit
wepkey 2:40-bit
wepkey 3:40-bit
wepkey 4:40-bit powersavemode OFF powersavesleep 100 txpowmax 100
rtsthreshold 2346 fragthreshold 2346 bmiss 7 mcastrate 1 scanvalid 60
-bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11a 14 roam:rate11a 12
roam:rssi11b 14 roam:rate11b 1 roam:rssi11g 14 roam:rate11g 5 -pureg
protmode CTS -wme -burst -ff -dturbo -hidessid -apbridge dtimperiod 1
doth bintval 100
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether be:8f:ad:8b:d5:5d
groups: bridge
id 00:02:6f:3a:98:b3 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 150 timeout 1200
root id 00:02:6f:3a:98:b3 priority 32768 ifcost 0 port 0
member: vr0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
member: wi0 flags=167<LEARNING,DISCOVER,STP,EDGE,AUTOEDGE,AUTOPTP>
port 4 priority 128 path cost 1818181 proto rstp
role designated state forwarding
--
João
A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br
More information about the freebsd-current
mailing list