Before I go off to the computer store to replace a DVD
Nikolay Pavlov
quetzal at zone3000.net
Wed Apr 25 17:18:39 UTC 2007
On Wednesday, 25 April 2007 at 13:22:13 +0200, Fabian Keil wrote:
> Randall Stewart <rrs at cisco.com> wrote:
>
> > I have begun having difficulty with my DVD-backup that happens
> > every night.
> >
> > It WAS working.. but now I am seeing (on creating my initial backup):
> > ***************************************************************
> > bash-lakerest.net: growisofs -Z /dev/cd0 -R -J backup_init.04-24-2007.gz
> > Executing 'mkisofs -R -J backup_init.04-24-2007.gz | builtin_dd
> > of=/dev/pass0 obs=32k seek=0'
> > 1.49% done, estimate finish Wed Apr 25 06:49:25 2007
>
> > 99.60% done, estimate finish Wed Apr 25 06:50:20 2007
> > Total translation table size: 0
> > Total rockridge attributes bytes: 266
> > Total directory bytes: 0
> > Path table size(bytes): 10
> > Max brk space used 3440e4
> > 336353 extents written (656 MB)
> > builtin_dd: 336368*2KB out @ average 5.8x1385KBps
> > /dev/pass0: flushing cache
> > :-( unable to TEST UNIT READY: Input/output error
> > :-[ SYNCHRONOUS FLUSH CACHE failed with SK=2h/ASC=04h/ACQ=07h]: Resource
> > temporarily unavailable
> > **********************************************************
> > And on the console while its progressing:
> > **********************************************************
> > acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 as=0x00
> > acd0: FAILURE - unknown CMD (0x03) HARDWARE ERROR asc=0x08 ascq=0x01
> > acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x21 ascq=0x02
> > **********************************************************
> > When I try to "append" to the DVD:
> > **********************************************************
> > :-( unable to pread64(2) primary volume descriptor: Input/output error
> > you most likely want to use -Z option.
> > backup complete Tue Apr 24 01:03:45 EDT 2007
> > **********************************************************
> >
> > Now I would chalk this off to just a hardware failure (since it was
> > working).. But when I try this on another machine that happens
> > to have a DVD write... I get all the nice messages.. it completes
> > with no errors .. and I can't mount the drive :-(
> >
> > The drive that errors is a SONY..
> > 'SONY ' 'DVD RW DRU-820A ' '1.0a' Removable CD-ROM
> >
> > On a 7.0 current machine.
> >
> > The one that does not error but does not let me mount things is:
> >
> > 'GENERIC ' 'DVD RW 8XMax ' '140I' Removable CD-ROM
> >
> > On a 6.2 machine.
> >
> > Now it could be that both have failed.. my office is in
> > a barn.. but it just seems strange to me .
> >
> >
> > As anyone else seen these types of errors? should I just
> > replace the drives?
>
> I saw similar looking failure messages a few days ago with
> cdrecord (burning DVDs) and if I remember correctly with
> readcd as well (checking the burned discs).
>
> The created discs were OK though and I don't burn
> that much, so the error messages might not be new.
>
> The drive is a LiteOn SOHW-1693S.
>
> Fabian
It's probably not related to this but i have 100% reproducable
reboots (without any panics) every time i am starting k3b-1.0_1.
I am using cdrtools-2.01_5
quetzal at orion:~> uname -a
FreeBSD orion.zone3000.net 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Tue Apr
24 03:36:01 EEST 2007
root at orion.zone3000.net:/usr/obj/usr/src/sys/GENERIC i386
quetzal at orion:~> pciconf -vl
<441>
hostb0 at pci0:0:0: class=0x060000 card=0x01c91028 chip=0x25908086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82915PM/GM/GMS, 82910GML Host Bridge'
class = bridge
subclass = HOST-PCI
vgapci0 at pci0:2:0: class=0x030000 card=0x01c91028 chip=0x25928086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82915GM/GMS, 82910GML Integrated Graphics Device'
class = display
subclass = VGA
vgapci1 at pci0:2:1: class=0x038000 card=0x01c91028 chip=0x27928086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82915GM/GMS,82910GML Mobile Express Family Graphics
Controller (??)'
class = display
pcm0 at pci0:27:0: class=0x040300 card=0x01c91028 chip=0x26688086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '8181104 Intel High Definition Audio Controllers'
class = multimedia
pcib1 at pci0:28:0: class=0x060400 card=0x00000000 chip=0x26608086
rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801FB (ICH6) PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
pcib2 at pci0:28:3: class=0x060400 card=0x00000000 chip=0x26668086
rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801FB (ICH6) PCI Express Root Port 4'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x01c91028 chip=0x26588086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x01c91028 chip=0x26598086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x01c91028 chip=0x265a8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci3 at pci0:29:3: class=0x0c0300 card=0x01c91028 chip=0x265b8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
ehci0 at pci0:29:7: class=0x0c0320 card=0x01c91028 chip=0x265c8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller'
class = serial bus
subclass = USB
pcib3 at pci0:30:0: class=0x060401 card=0x01c91028 chip=0x24488086
rev=0xd3 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x01c91028 chip=0x26418086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FBM LPC Interface Bridge (ICH6-M)'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x01c91028 chip=0x266f8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FBM Ultra ATA Storage Controllers - 266F'
class = mass storage
subclass = ATA
bfe0 at pci2:0:0: class=0x020000 card=0x01c91028 chip=0x170c14e4 rev=0x02
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM440x 100Base-TX Fast Ethernet'
class = network
subclass = ethernet
ndis0 at pci2:3:0: class=0x028000 card=0x00051028 chip=0x431914e4 rev=0x02
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Dell Wireless 1470 DualBand WLAN'
class = network
quetzal at orion:~> cat /boot/loader.conf
autoboot_delay="3"
verbose_loading="YES"
snd_hda_load="YES"
atapicam_load="YES"
usd_load="YES"
i915_load="YES"
drm_load="YES"
bcmwl5_sys_load="YES"
wlan_xauth_load="YES"
umodem_load="YES"
geom_journal_load="YES"
--
======================================================================
- Best regards, Nikolay Pavlov. <<<-----------------------------------
======================================================================
More information about the freebsd-current
mailing list