acpi0: reservation of 0, a0000 (3) failed and afd0: FAILURE - INQUIRY ILLEGAL REQUEST

Andrei V. Lavreniyuk bamston at
Fri Apr 20 18:19:05 UTC 2007


# uname -a
FreeBSD 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Fri Apr 20 19:02:10 EEST 
2007     root at  amd64

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Fri Apr 20 19:02:10 EEST 2007
    root at
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2994.47-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf49  Stepping = 9
  AMD Features=0x20000800<SYSCALL,LM>
  AMD Features2=0x1<LAHF>
  Logical CPUs per core: 2
usable memory = 1057132544 (1008 MB)
avail memory  = 1017810944 (970 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)

acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f6f0000 (3) failed

^^^^^^^^^^^^^^^^   ???

Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 
0xf0000000-0xf7ffffff,0xfbe80000-0xfbefffff irq 16 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem 
0xfbfffc00-0xfbfffc7f irq 17 at device 9.0 on pci1
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:78:ab:ed
xl0: [ITHREAD]
ahc0: <Adaptec 2940 SCSI adapter> port 0xe800-0xe8ff mem 0xfbffe000-0xfbffefff 
irq 21 at device 10.0 on pci1
ahc0: [ITHREAD]
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe480-0xe4ff mem 
0xfbfff800-0xfbfff87f irq 22 at device 11.0 on pci1
miibus1: <MII bus> on xl1
ukphy1: <Generic IEEE 802.3u media interface> PHY 24 on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: Ethernet address: 00:0a:5e:78:ab:56
xl1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH5 SATA150 controller> port 
0xd880-0xd887,0xd800-0xd803,0xd480-0xd487,0xd400-0xd403,0xd080-0xd08f irq 18 
at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on 
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0: [FILTER]
cryptosoft0: <software crypto> on motherboard
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xc9fff,0xca000-0xca7ff,0xca800-0xcafff,0xcb000-0xcb7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, rule-based forwarding enabled, 
default to deny, logging limited to 100 packets/entry by default
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <GCR-8523B/1.00> at ata0-master PIO4
afd0: 95MB <IOMEGA ZIP 100 ATAPI 14.A> at ata1-master PIO0
ad4: 76319MB <Seagate ST380811AS 3.AAE> at ata2-master SATA150

acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00

^^^^^^^^^^^^^^^^   ???

afd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00

^^^^^^^^^^^^^^^^   ???

sa0 at ahc0 bus 0 target 3 lun 0
sa0: <HP C1537A L111> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)da0 at ata1 bus 0 target 0 lun 
da0: <IOMEGA ZIP 100 14.A> Removable Direct Access SCSI-0 device
da0: 3.300MB/s transfers
da0: 96MB (196608 512 byte sectors: 64H 32S/T 96C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST CD-ROM GCR-8523B 1.00> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present

SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
GEOM_ELI: Device ad4s1b.eli created.
GEOM_ELI: Encryption: AES-CBC 256
GEOM_ELI:     Crypto: software
WARNING: /zip was not properly dismounted


Best regards, Andrei V. Lavreniyuk.

More information about the freebsd-current mailing list