intsmb fails to attach
John Baldwin
jhb at freebsd.org
Thu Apr 19 00:48:13 UTC 2007
On Sunday 01 April 2007 16:49, Ulrich Spoerlein wrote:
> Hi,
>
> I just upgraded my oldish ASUS P2B machine to current, and noticed
> intsmb0 failing to attach. It's not that I need it, but perhaps the
> problem is more wide spread:
Did it work before?
> intsmb0: <Intel PIIX4 SMBUS Interface> port 0xe800-0xe80f at device 4.3 on pci0
> intsmb0: intr IRQ 9 enabled revision 0
> intsmb0: Unsupported interrupt mode
> device_attach: intsmb0 attach returned 6
>
> intsmb0 at pci0:4:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
> class = bridge
>
> Any stuff I should try?
>
> There are also some ACPI reservations failing, but as this is an old
> board, I think this is to be expected:
>
> ACPI: RSDP @ 0x0xf7f80/0x0014 (v 0 ASUS )
> ACPI: RSDT @ 0x0x13ffd000/0x002C (v 1 ASUS P2B 0x42302E31 MSFT 0x31313031)
> ACPI: FACP @ 0x0x13ffd080/0x0074 (v 1 ASUS P2B 0x42302E31 MSFT 0x31313031)
> ACPI: DSDT @ 0x0x13ffd100/0x1BA8 (v 1 ASUS P2B 0x00001000 MSFT 0x01000001)
> ACPI: FACS @ 0x0x13fff000/0x0040
> ACPI: BOOT @ 0x0x13ffd040/0x0028 (v 1 ASUS P2B 0x42302E31 MSFT 0x31313031)
> acpi0: <ASUS P2B> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 13f00000 (3) failed
>
> Ulrich Spoerlein
--
John Baldwin
More information about the freebsd-current
mailing list