Sata controller headache
Paul Bliss
pbliss at mechno.com
Thu Sep 28 07:04:34 PDT 2006
Hello all,
I recently rebuilt my server and made a few upgrades.
I'm running 6.1 RELEASE and I've been having very annoying crashes that I
think are related to my SATA Controller.
I'm using the Promise FastTrak TX2300 controller with a Western
Digital WD2500KS.
The problem I'm having is that when I execute a command that hits the disc
too hard, such an "ls -laR /foo"
/var/log messages is giving me errors that look like this:
Sep 28 01:23:19 helix kernel: ad4: TIMEOUT - READ_DMA48 retrying (1 retry
left) LBA=310114239
Sep 28 01:23:19 helix kernel: ad4: WARNING - READ_DMA48 UDMA ICRC error
(retrying request) LBA=310114239
Sep 28 01:23:28 helix kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE
taskqueue timeout - completing request directly
Sep 28 01:23:44 helix kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE
taskqueue timeout - completing request directly
Sep 28 01:23:44 helix kernel: ad4: WARNING - SETFEATURES ENABLE RCACHE
taskqueue timeout - completing request directly
Sep 28 01:23:44 helix kernel: ad4: WARNING - SETFEATURES ENABLE WCACHE
taskqueue timeout - completing request directly
Sep 28 01:23:44 helix kernel: ad4: WARNING - SET_MULTI taskqueue timeout -
completing request directly
Sep 28 01:23:44 helix kernel: ad4: FAILURE - READ_DMA48 timed out
LBA=310114239
Sep 28 01:23:44 helix kernel: g_vfs_done():ad4s1f[READ(offset=42109632512,
length=131072)]error = 5
Has anyone else seen this? Any suggestions? I'm tempted to use atacontrol
to change the mode, but I figured I'd ask the list first.
TIA for the help!
-Paul
P.S.
Output of "smartctl -a /dev/ad4/
smartctl version 5.36 [i386-portbld-freebsd6.1] Copyright (C) 2002-6 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: WDC WD2500KS-00MJB0
Serial Number: WD-WCANK3148169
Firmware Version: 02.01C03
User Capacity: 250,059,350,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Sep 28 09:58:50 2006 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has
ever
been run.
Total time to complete Offline
data collection: (7080) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon
new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 83) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0003 217 217 021 Pre-fail Always
- 4125
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 29
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always
- 5117
10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 28
190 Unknown_Attribute 0x0022 038 026 045 Old_age Always
FAILING_NOW 62
194 Temperature_Celsius 0x0022 088 076 000 Old_age Always
- 62
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 9
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute
delay.
More information about the freebsd-current
mailing list