LSI 1030 mpt doesn't work if I build a new kernel

[Matthew Jacob]

Can you tell me more precisely what hardware you have?

On 9/1/06, Rod Person <rodperson at adelphia.net> wrote:
> I've been struggling with this for a month or two now.
>
> I installed FreeBSD current 7 with a march snapshot and this work good,
> but I've tried to build a new kernel for the 2 month period and building
> a kernel causes the mpt driver to panic on boot.
>
> Here is so of the boot message:
>
> mpt1: [GIANT-LOCKED]
> mpt1: MPI Version=1.2.14.0
> mpt1: mpt_wait_req(4) timed out
> mpt1: read_cfg_header timed out
> mpt1: mpt_wait_req(6) timed out
> mpt1: port 0 enable timed out
> mpt1: failed to enable port 0
>
> then this repeats until the system hangs:
>
> mpt0: Address Reply:
> SCSI Target Command Buffer Reply @ 0xffffffffacc7a200
>         IOC Status    Success
>         IOCLogInfo    0x00000000
>         MsgLength     0x05
>         MsgFlags      0x00
>         MsgContext    0x0003005d
> mpt0: Reply Frame Ignored
> mpt0: Default Handler Called: req=0xffffffff80e49050:95
> reply_descriptor=dc913980 frame=0xffffffffacc7a300
> mpt0: Address Reply:
>
> I was wondering if this is a known problem or if there are any hints on
> correcting this?
>
> Rod
>
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>