Call for Marvell/SysKonnect Yukon II Gigabit Ethernet testers.
Ivan Synyeokov
johnny at johnny.kiev.ua
Thu Oct 5 00:35:18 PDT 2006
This is a multi-part message in MIME format.
--------------090409060801000001040704
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
On 01.10.2006 13:38 Pyun YongHyeon wrote:
> I've updated e1000phy(4) to support Yukon FE and automatic crossover
> functions on copper media. I don't have Yukon FE(Fast Ethernet) so I
> can't verify e1000phy(4) works on Yukon FE but it seems that automatic
> crossover works well on my Yukon EC. Now you don't need to find a
> crossover cable to connect two systems.
> However, it seems that manual media configutation does not work
> correctly. I can't sure it ever worked but I'm working on it.
>
> The updated e1000phy(4) also supports two additional PHY models which
> are supposed to be used on nfe(4). So if you use nfe(4) on CURRENT and
> ukphy(4) is attached on your NIC, please give e1000(4) go.
> If your Marvell NIC still use ukphy(4) please let me know what PHY
> models it is.(Set debug.bootverbose to 1 with sysctl(8) and load the
> driver module again. ukphy(4) will tell you OUI/model number for you.)
>
> As usual you can get the latest msk(4) driver from the following URL.
> http://people.freebsd.org/~yongari/msk/msk.HEAD.diff
>
> ATM the msk(4) has Rx performance issue. Because no documentation is
> available for Yukon II, I can't sure I can fix it but I'll do my best
> to address it.
>
> TODO:
> Fix manual media configuration(e1000phy(4)).
> Performance tuning.
> Rx TCP/UDP checksum offload.
> TSO support.
> 64bit DMA(DAC) support.
>
> Thank you.
>
> PS. I'll not be available for 2 weeks so please don't look forward to
> getting quick reply.
Unfortunately, it's not working - watchdog timeouts :(
I attached verbose dmesg, so maybe somebody could have a look.
--
Johnny
--------------090409060801000001040704
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.txt"
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Tue Oct 3 18:02:07 EEST 2006
johnny at localhost:/usr/obj/usr/src.current/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2009.27-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
real memory = 1073676288 (1023 MB)
avail memory = 1037189120 (989 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: reservation of fff00000, 400f0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: waiting for BIOS to give up control
usb1: timed out waiting for BIOS
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xfcfc0000-0xfcfdffff,0xfb800000-0xfbffffff,0xfc000000-0xfc7fffff irq 16 at device 4.0 on pci1
pcm0: <NVidia MCP55 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 23 at device 6.1 on pci0
pci0: <bridge> at device 8.0 (no driver attached)
pci0: <bridge> at device 9.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci1: <JMicron JMB363 SATA300 controller> port 0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb407,0xb000-0xb003,0xac00-0xac0f mem 0xfdbfe000-0xfdbfffff irq 16 at device 0.0 on pci3
atapci1: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci6: <ACPI PCI bus> on pcib6
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xce7ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad0: 190782MB <WDC WD2000JB-00GVA0 08.02D08> at ata0-master UDMA100
acd0: CDROM <LTN526S/YS0A> at ata0-slave PIO4
pcm0: <HDA Codec: Realtek (Unknown)>
pcm0: <HDA Driver Revision: 20061003_0029>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s2a
Linux ELF exec handler installed
pcm0: PCMDIR_PLAY: Stream setup nid=2 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=3 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=4 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=5 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=37 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=2 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=3 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=4 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=5 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=37 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=2 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=3 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=4 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=5 fmt=0x00000011
pcm0: PCMDIR_PLAY: Stream setup nid=37 fmt=0x00000011
pci0: driver added
found-> vendor=0x10de, dev=0x0369, revid=0xa1
bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:0: reprobing on driver added
found-> vendor=0x10de, dev=0x0368, revid=0xa2
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=20
powerspec 2 supports D0 D3 current D0
pci0:1:1: reprobing on driver added
found-> vendor=0x10de, dev=0x036a, revid=0xa2
bus=0, slot=1, func=2
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:1:2: reprobing on driver added
found-> vendor=0x10de, dev=0x0373, revid=0xa2
bus=0, slot=8, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=20
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 8 messages, 64 bit, vector masks
pci0:8:0: reprobing on driver added
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xf000-0xf007 mem 0xfe02d000-0xfe02dfff,0xfe02c000-0xfe02c0ff,0xfe02b000-0xfe02b00f irq 20 at device 8.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:04:61:47:74:a0
INTR: Assigning IRQ 20 to local APIC 1
ioapic0: Assigning PCI IRQ 20 to local APIC 1
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 59
nfe0: [MPSAFE]
found-> vendor=0x10de, dev=0x0373, revid=0xa2
bus=0, slot=9, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 8 messages, 64 bit, vector masks
pci0:9:0: reprobing on driver added
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xec00-0xec07 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 21 at device 9.0 on pci0
nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe1: bpf attached
nfe1: Ethernet address: 00:04:61:47:74:a1
nfe1: [MPSAFE]
pci1: driver added
pci2: driver added
pci3: driver added
pci4: driver added
pci5: driver added
pci6: driver added
nfe0: link state changed to DOWN
nfe0: link state changed to UP
nfe0: watchdog timeout
nfe0: link state changed to DOWN
nfe0: link state changed to UP
nfe0: watchdog timeout
nfe0: link state changed to DOWN
nfe0: link state changed to UP
nfe0: watchdog timeout
nfe0: link state changed to DOWN
nfe0: link state changed to UP
nfe0: watchdog timeout
nfe0: link state changed to DOWN
nfe0: link state changed to UP
nfe0: watchdog timeout
nfe0: link state changed to DOWN
nfe0: link state changed to UP
--------------090409060801000001040704--
More information about the freebsd-current
mailing list