Multicast does not work with Dell 2950 with Broadcom NetXtreme II
BCM5708 1000Base-T
Michael Peer
mpeer at koce.org
Tue Nov 7 23:46:42 UTC 2006
Hope anyone can help?
I have a new Dell 2950 with the Broadcom NetXtreme II NIC on board and
seeing the following:
GB 0 interface is listed as bce1, and GB 1 is listed as bce1. Do not
see that with older dells that use em0, and em1 on-board NIC,
but this is not my problem
I am using the box as router, with quagga ospf loaded. It does not see
the OSPF multicast traffic of my other routers on network.
Funny thing is if I run tcpdump -i bce0 net 224.0.0.0/8 then the router
works!
I have added an em0 and em1 PCI Intel PRO 1000MT NIC and it works fine.
I have updated to RELENG_6 so I am running FreeBSD 6.2-PRERELEASE.
Here is important information:
dmesg -a:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #1: Tue Nov 7 03:05:22 PST 2006
root at mydomain.com:/usr/src/sys/i386/compile/SHIELD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz (1864.43-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15
>,<b18>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1073381376 (1023 MB)
avail memory = 1041211392 (992 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic1: WARNING: intbase 64 != expected base 24
ioapic2: Changing APIC ID to 4
ioapic2: WARNING: intbase 160 != expected base 88
ioapic3: Changing APIC ID to 5
ioapic3: WARNING: intbase 224 != expected base 184
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
ioapic2 <Version 2.0> irqs 160-183 on motherboard
ioapic3 <Version 2.0> irqs 224-247 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci6: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bce0: Ethernet address: 00:18:8b:3e:26:13
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pci10: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pci11: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib8
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc7e0000-0xfc7fffff
irq 78 at device 14.0 on pci2
mfi0: 553 (216213286s/0x0020/0) - Shutdown command received from host
mfi0: 554 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028
0x041f03: Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 555 (4278190080s/0x0020/0) - Type 18: Firmware version
1.00.01-0088
mfi0: 556 (4278190093s/0x0008/0) - Battery Present
mfi0: 557 (4278190110s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES)
discovered on PD 08(e1/s255)
mfi0: 558 (4278190110s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD
08(e1/s255)
mfi0: 559 (4278190110s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255)
Info: enclPd=08, scsiType=d, portMap=00,
sasAddr=500180b03602d700,0000000000000000
mfi0: 560 (4278190110s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD
00(e1/s0)
mfi0: 561 (4278190110s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info:
enclPd=08, scsiType=0, portMap=01,
sasAddr=1221000000000000,0000000000000000
mfi0: 562 (4278190110s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD
01(e1/s1)
mfi0: 563 (4278190110s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info:
enclPd=08, scsiType=0, portMap=02,
sasAddr=1221000001000000,0000000000000000
mfi0: 564 (4278190110s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD
02(e1/s2)
mfi0: 565 (4278190110s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2) Info:
enclPd=08, scsiType=0, portMap=04,
sasAddr=1221000002000000,0000000000000000
mfi0: 566 (216213342s/0x0020/0) - Adapter ticks 216213342 elapsed 31s:
Time established as 11/07/06 11:15:42; (31 seconds since power on)
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci12: <ACPI PCI bus> on pcib10
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0xece0-0xecff mem 0xfc4e0000-0xfc4fffff,0xfc4c0000-0xfc4dffff irq 16 at
device 0.0 on pci12
em0: Ethernet address: 00:15:17:13:eb:a2
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0xecc0-0xecdf mem 0xfc4a0000-0xfc4bffff,0xfc480000-0xfc49ffff irq 17 at
device 0.1 on pci12
em1: Ethernet address: 00:15:17:13:eb:a3
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pci13: <PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci14: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci14
pci15: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 0.2 on pci14
pci16: <ACPI PCI bus> on pcib14
pcib15: <PCI-PCI bridge> at device 7.0 on pci0
pci17: <PCI bus> on pcib15
pcib16: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib16
pcib17: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib17
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bce1: Ethernet address: 00:18:8b:3e:26:11
uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900000-0xfc9003ff irq
21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
ukbd0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
kbd2 at ukbd0
ums0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
umass1: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 5
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
pcib18: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci18: <ACPI PCI bus> on pcib18
pci18: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ukbd1: DELL DELL USB Keyboard, rev 1.10/1.04, addr 2, iclass 3/1
kbd3 at ukbd1
Timecounters tick every 1.000 msec
IP Filter: v4.1.13 initialized. Default = pass all, Logging = enabled
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B101> at ata0-master UDMA33
mfi0: 567 (216213399s/0x0008/0) - Battery temperature is normal
mfi0: 568 (216213399s/0x0008/0) - Current capacity of the battery is
above threshold
mfid0: <MFI Logical Disk> on mfi0
mfid0: 151552MB (310378496 sectors) RAID volume '' is optimal
SMP: AP CPU #1 Launched!
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <Dell Virtual Floppy 123> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <Dell Virtual CDROM 123> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present
(da0:umass-sim1:1:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present
(da0:umass-sim1:1:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present
(da0:umass-sim1:1:0:0): Unretryable error
Opened disk da0 -> 6
Trying to mount root from ufs:/dev/mfid0s1a
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/mfid0s1b as swap device
Starting file system checks:
/dev/mfid0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mfid0s1a: clean, 4031199 free (727 frags, 503809 blocks, 0.0%
fragmentation)
/dev/mfid0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mfid0s1f: clean, 16247332 free (20 frags, 2030914 blocks, 0.0%
fragmentation)
/dev/mfid0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mfid0s1e: clean, 8122161 free (49 frags, 1015264 blocks, 0.0%
fragmentation)
/dev/mfid0s1g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mfid0s1g: clean, 33610855 free (50759 frags, 4195012 blocks, 0.1%
fragmentation)
/dev/mfid0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mfid0s1d: clean, 8120498 free (210 frags, 1015036 blocks, 0.0%
fragmentation)
Mounting local file systems:
.
Setting hostname: shield.mydomain.com.
net.inet6.ip6.auto_linklocal:
1
->
0
[ this information changed to protect the innocent ]
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
inet a.b.c.d netmask 0xffffff00 broadcast a.b.c.255
ether 00:00:00:00:00:00
media: Ethernet autoselect (none)
status: no carrier
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet a.b.d.e netmask 0xffffff00 broadcast a.b.d.255
ether 00:15:17:00:00:00
media: Ethernet autoselect
status: no carrier
bce1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
inet a.b.c.f netmask 0xffffff00 broadcast a.b.c.255
ether 00:18:8b:00:00:00
media: Ethernet autoselect (none)
status: no carrier
Additional routing options:
.
Starting devd.
Configuring keyboard:
.
hw.acpi.cpu.cx_lowest:
C1
->
C1
Starting quagga.
Starting quagga.
2006/11/07 03:16:58 OSPF: ASBR[Status:1]: Update
2006/11/07 03:16:58 OSPF: ASBR[Status:2]: Update
2006/11/07 03:16:58 OSPF: ASBR[Status:2]: Already ASBR
Mounting NFS file systems:
.
Creating and/or trimming log files:
.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Initial i386 initialization:
.
Additional ABI support:
.
Setting date via ntp.
bce0: link state changed to UP
em0: link state changed to UP
bce1: link state changed to UP
7 Nov 03:17:01 [ ntpdate line removed ]
Starting local daemons:
.
Updating motd
.
Mounting late file systems:
.
Starting ntpd.
Configuring syscons:
blanktime
.
Starting sshd.
Starting cron.
Local package initialization:
[ firewall rules here ]
ipf
ipmon
net.inet.ip.forwarding:
0
->
1
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.
Tue Nov 7 03:17:05 PST 2006
bce0: promiscuous mode enabled
bce1: promiscuous mode enabled
Nov 7 11:11:25 shield login: ROOT LOGIN (root) ON ttyv0
And ipfconf -I information
hostb0 at pci0:0:0: class=0x060000 card=0x80868086 chip=0x25c08086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:2:0: class=0x060400 card=0x00000050 chip=0x25e28086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib7 at pci0:3:0: class=0x060400 card=0x00000050 chip=0x25e38086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib10 at pci0:4:0: class=0x060400 card=0x00000050 chip=0x25f88086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib11 at pci0:5:0: class=0x060400 card=0x00000050 chip=0x25e58086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib12 at pci0:6:0: class=0x060400 card=0x00000050 chip=0x25f98086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib15 at pci0:7:0: class=0x060400 card=0x00000050 chip=0x25e78086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
hostb1 at pci0:16:0: class=0x060000 card=0x01b21028 chip=0x25f08086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb2 at pci0:16:1: class=0x060000 card=0x01b21028 chip=0x25f08086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb3 at pci0:16:2: class=0x060000 card=0x01b21028 chip=0x25f08086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb4 at pci0:17:0: class=0x060000 card=0x80868086 chip=0x25f18086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb5 at pci0:19:0: class=0x060000 card=0x80868086 chip=0x25f38086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb6 at pci0:21:0: class=0x060000 card=0x80868086 chip=0x25f58086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb7 at pci0:22:0: class=0x060000 card=0x80868086 chip=0x25f68086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
pcib16 at pci0:28:0: class=0x060400 card=0x00000040 chip=0x26908086
rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x01b21028 chip=0x26888086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x01b21028 chip=0x26898086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x01b21028 chip=0x268a8086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
ehci0 at pci0:29:7: class=0x0c0320 card=0x01b21028 chip=0x268c8086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
pcib18 at pci0:30:0: class=0x060401 card=0x00000050 chip=0x244e8086
rev=0xd9 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB
Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x26708086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x01b21028 chip=0x269e8086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = ATA
pcib2 at pci6:0:0: class=0x060400 card=0x00000044 chip=0x35008086
rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib6 at pci6:0:3: class=0x060400 card=0x00000044 chip=0x350c8086
rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib3 at pci7:0:0: class=0x060400 card=0x00000044 chip=0x35108086
rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib5 at pci7:1:0: class=0x060400 card=0x00000044 chip=0x35148086
rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib4 at pci8:0:0: class=0x060400 card=0x00000060 chip=0x01031166
rev=0xc2 hdr=0x01
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
class = bridge
subclass = PCI-PCI
bce0 at pci9:0:0: class=0x020000 card=0x01b21028 chip=0x164c14e4
rev=0x11 hdr=0x00
vendor = 'Broadcom Corporation'
class = network
subclass = ethernet
pcib8 at pci1:0:0: class=0x060400 card=0x00000044 chip=0x03708086
rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '80333 Segment-A PCI Express-to-PCI Express Bridge'
class = bridge
subclass = PCI-PCI
pcib9 at pci1:0:2: class=0x060400 card=0x00000044 chip=0x03728086
rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '80333 Segment-B PCI Express-to-PCI Express Bridge'
class = bridge
subclass = PCI-PCI
mfi0 at pci2:14:0: class=0x010400 card=0x1f031028 chip=0x00151028
rev=0x00 hdr=0x00
vendor = 'Dell Computer Corporation'
class = mass storage
subclass = RAID
em0 at pci12:0:0: class=0x020000 card=0x135e8086 chip=0x105e8086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/1000 PT'
class = network
subclass = ethernet
em1 at pci12:0:1: class=0x020000 card=0x135e8086 chip=0x105e8086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/1000 PT'
class = network
subclass = ethernet
pcib13 at pci14:0:0: class=0x060400 card=0x00000044 chip=0x03298086
rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge A'
class = bridge
subclass = PCI-PCI
pcib14 at pci14:0:2: class=0x060400 card=0x00000044 chip=0x032a8086
rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge B'
class = bridge
subclass = PCI-PCI
pcib17 at pci4:0:0: class=0x060400 card=0x00000060 chip=0x01031166
rev=0xc2 hdr=0x01
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
class = bridge
subclass = PCI-PCI
bce1 at pci5:0:0: class=0x020000 card=0x01b21028 chip=0x164c14e4
rev=0x11 hdr=0x00
vendor = 'Broadcom Corporation'
class = network
subclass = ethernet
none0 at pci18:13:0: class=0x030000 card=0x01b21028 chip=0x515e1002
rev=0x02 hdr=0x00
vendor = 'ATI Technologies Inc'
class = display
subclass = VGA
More information about the freebsd-current
mailing list