cPCI Hotplug support

[livefreebsd at mac.com]

I changed this to be 192.168.2.1 and 172.21.2.1 respectively. Still not working. There is no link light or indication of power to the interfaces. I can plug the cables into another interface of a server and they work fine. So the switches, cables and IP addresses are fine. Card just won't power up.

Park

On Wednesday, June 14, 2006, at 03:36AM, Brian Candler <B.Candler at pobox.com> wrote:

>On Tue, Jun 13, 2006 at 09:53:09AM -0400, John Baldwin wrote:
>> On Wednesday 19 April 2006 18:14, Park Foreman wrote:
>> > System: Nokia IP330 using AMD K6 processor
>> > Card: Zynx ZX412 dual 10/100 card and DEC/Intel 21143 chipset
>> > 
>> > ifconfig:
>> > dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>> >          options=8<VLAN_MTU>
>> >          inet 172.21.1.1 netmask 0xffff0000 broadcast 172.21.255.255
>> >          inet6 fe80::2c0:95ff:fee5:7d8c%dc0 prefixlen 64 scopeid 0x4
>> >          ether 00:c0:95:e5:12:ab
>> >          media: Ethernet autoselect (none)
>> >          status: no carrier
>> > dc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>> >          options=8<VLAN_MTU>
>> >          inet 172.21.2.1 netmask 0xffff0000 broadcast 172.21.255.255
>> >          inet6 fe80::2c0:95ff:fee5:7d8d%dc1 prefixlen 64 scopeid 0x5
>> >          ether 00:c0:95:e5:23:cd
>> >          media: Ethernet autoselect (none)
>> >          status: no carrier
>
>Aside: those two IP addresses are on the same IP subnet, 172.21.0.0/16. Does
>that now work? It didn't used to, but I once saw a project on the wishlist
>to separate out the ARP table from the forwarding table so that this could
>work. Did that happen?
>
>With the above configuration, both NICs would have to be plugged into the
>same LAN, of course.
>
>Or maybe the OP meant to set /24 netmasks, but didn't.
>
>Regards,
>
>Brian.
>
>