cPCI Hotplug support

[John Baldwin]

On Wednesday 19 April 2006 18:14, Park Foreman wrote:
> System: Nokia IP330 using AMD K6 processor
> Card: Zynx ZX412 dual 10/100 card and DEC/Intel 21143 chipset
> 
> ifconfig:
> dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>          options=8<VLAN_MTU>
>          inet 172.21.1.1 netmask 0xffff0000 broadcast 172.21.255.255
>          inet6 fe80::2c0:95ff:fee5:7d8c%dc0 prefixlen 64 scopeid 0x4
>          ether 00:c0:95:e5:12:ab
>          media: Ethernet autoselect (none)
>          status: no carrier
> dc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>          options=8<VLAN_MTU>
>          inet 172.21.2.1 netmask 0xffff0000 broadcast 172.21.255.255
>          inet6 fe80::2c0:95ff:fee5:7d8d%dc1 prefixlen 64 scopeid 0x5
>          ether 00:c0:95:e5:23:cd
>          media: Ethernet autoselect (none)
>          status: no carrier

Perhaps try using 'de(4)' rather than 'dc(4)'.  I'm not sure that would
really help though.  Do the devices work if they are plugged in while
the machine is off?

-- 
John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org