call for sk(4) testers
Pyun YongHyeon
pyunyh at gmail.com
Mon Jan 16 22:12:03 PST 2006
On Mon, Jan 16, 2006 at 10:58:40PM -0700, Joshua Tinnin wrote:
> On Sat 14 Jan 06 21:43, Joshua Tinnin <krinklyfig at comcast.net> wrote:
> > On Sat 14 Jan 06 21:02, Pyun YongHyeon <pyunyh at gmail.com> wrote:
> > > On Sat, Jan 14, 2006 at 12:06:48AM -0700, Joshua Tinnin wrote:
> <snip>
> > > > # uname -a
> > > > FreeBSD smogmonster.local 6.0-RELEASE-p2 FreeBSD 6.0-RELEASE-p2
> > > > #0: Fri Jan 13 23:13:57 MST 2006
> > > > krinklyfig at smogmonster.local:/usr/obj/usr/src/sys/MYKERNEL60
> > > > i386
> > > >
> > > > # dmesg | grep sk
> > > > skc0: <Marvell Gigabit Ethernet> port 0x9000-0x90ff mem
> > > > 0xec000000-0xec003fff irq 17 at device 4.0 on pci1
> > > > skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
> > > > sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> > > > sk0: Ethernet address: 00:0e:a6:70:56:75
> > > >
> > > > As for dual port, I also have:
> > > >
> > > > miibus0: <MII bus> on sk0
> > > > e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
> > > > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> > > > 1000baseTX-FDX, auto
> > > >
> > > > ... although I haven't used that one, yet. I can try it if you
> > > > like.
> > >
> > > Yes. I'd like to know it has locking bugs on dual port handling.
> > > I'd also like to know sk(4) works on second generation chips from
> > > Marvell.(e.g. Yukon-II XL/EC/FE)
> >
> > OK, I'll give it a shot ...
>
> Sorry to say, unfortunately, it didn't work. I couldn't even bring up
> the e1000phy interface.
Would you please give more information?
Does stock sk(4) work on the NIC? is it YukonII?
>
> Still no watchdog timeouts on sk0, however.
>
I performed serveral hours of Rx/Tx tests and couldn't see
watchdog timeout. So I think that particular issues was gone.
> - jt
Thank you.
--
Regards,
Pyun YongHyeon
More information about the freebsd-current
mailing list