dc no worky in -current

[M. Warner Losh]

In message: <Pine.GSO.4.43.0602152123330.8853-100000 at sea.ntplx.net>
            Daniel Eischen <eischen at vigrid.com> writes:
: Sometime between now and October, dc broke for my Dell Inspiron 8100.
: Here's what it says now:
: 
: cardbus0: Unable to allocate resource to read CIS.
: cardbus0: Unable to allocate resources for CIS
: dc0: <Xircom X3201 10/100BaseTX> port 0xe000-0xe07f mem 0xf4002000-0xf40027ff,0xf4003000-0xf40037ff at device 0.0 on cardbus0
: dc0: No station address in CIS!
: device_attach: dc0 attach returned 6
: 
: This happens with both a Xircom RealPort 10/100 + Modem (RBEM56G-100)
: and with just a plain old vanilla Xircom 10/100 (CBE2-100).
: 
: Warner, you have one of those Xircoms.  Does it work for you?
: 
: As a work-around, I installed a Linksys 10/100 (PCMPC100 v3)
: and it's working just fine.
: 
: Any ideas?

Last time I checked, it worked for me.  This may be due to the
topology of the 8100 that you have.  My 8000 died a few years ago, but
I kept the 1600x1200 screen by moving it to a carcus of a 8200.  That
machine these days runs windows.  Alas, it runs it slowly for reasons
I haven't completely figured out, but think I have narrowed down to
either a bug in windows (speed step down, but not back up) or a heat
problem that's causing the BIOS to downclock the unit.

Warner