FreeBSD 6 (or 7) on a HP DL140 G3 SATA
John Baldwin
jhb at freebsd.org
Mon Dec 11 13:41:50 PST 2006
On Thursday 07 December 2006 22:53, Peter Losher wrote:
> Just got my hands on a HP DL140 G3 (generation 3) server, which has a
> LSI Logic SAS controller. You can run the live CD or install FreeBSD
> (6.2-RC1 or 7-CURRENT) onto the HD's, but when you boot from the disks,
> the boot loader barfs:
>
> -=-
> int=0000000d err=0000001a efl=00030287 eip=0000291d
> eax=1400000a ebx=00000b3e ecx=00000000 edx=0000c900
> esi=00000d1c edi=00000001 ebp=00000206 esp=00000200
> cs=c900 ds=9a00 es=9a00 fs=0000 gs=0000 ss=9a00
> cs:eip=cc 68 32 06 ff 34 e8 db-fc 83 c4 04 89 46 fe 5f
> 5e c9 c3 55 8b ec 1e 33-c0 8e d8 a0 75 04 3c 00
> ss:esp=1c 0d 02 00 00 00 34 02-d8 45 1c 0d 00 00 00 14
> 00 00 00 00 01 00 00 00-1c 0d 02 00 00 00 00 00
> BTX halted
> -=-
>
> Here is the relevant BIOS output from the controller:
This was just fixed a few days ago. If re@ did a new snap over the weekend
try that as it should have the fix.
--
John Baldwin
More information about the freebsd-current
mailing list