atapi/IDE DVD problem

Josh Carroll josh.carroll at gmail.com
Thu Aug 31 02:42:18 UTC 2006


I was able to get it booted with the DVD powered and on the ata4
channel. Touching either the disk or that DVD device on the channel
results in the hangs previously mentioned.

I was, however, able to get a dmesg with the DVD plugged in, along
with pciconf -l and atacontrol list output (see below). Hopefully this
provides a bit more info for debugging.

Thanks,
Josh


dmesg output (w/verbose logging):
========================================================
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
io: <I/O>
netsmb_dev: loaded
nfslock: pseudo-device
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000094
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=29a08086)
pcibios: BIOS version 3.00
Found $PIR table, 15 entries at 0xc00f6500
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    1    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    0    1    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0    1    D   0x63  3 4 5 6 7 10 11 12 14 15
embedded    0    2    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0    3    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0    3    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    0    3    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   31    B   0x63  3 4 5 6 7 10 11 12 14 15
embedded    0   31    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   29    A   0x6b  3 4 5 6 7 10 11 12 14 15
embedded    0   29    B   0x63  3 4 5 6 7 10 11 12 14 15
embedded    0   29    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   29    D   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0   26    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0   26    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    0   26    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   27    A   0x6a  3 4 5 6 7 10 11 12 14 15
embedded    0   28    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0   28    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    0   28    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   28    D   0x63  3 4 5 6 7 10 11 12 14 15
slot 32     3    0    A   0x60  3 4 5 6 7 10 11 12 14 15
slot 32     3    0    B   0x61  3 4 5 6 7 10 11 12 14 15
slot 32     3    0    C   0x62  3 4 5 6 7 10 11 12 14 15
slot 32     3    0    D   0x63  3 4 5 6 7 10 11 12 14 15
embedded    0   25    A   0x68  3 4 5 6 7 10 11 12 14 15
embedded    0   25    B   0x69  3 4 5 6 7 10 11 12 14 15
slot 1      4    0    A   0x69  3 4 5 6 7 10 11 12 14 15
slot 1      4    0    B   0x6a  3 4 5 6 7 10 11 12 14 15
slot 1      4    0    C   0x6b  3 4 5 6 7 10 11 12 14 15
slot 1      4    0    D   0x68  3 4 5 6 7 10 11 12 14 15
slot 2      4    1    A   0x6a  3 4 5 6 7 10 11 12 14 15
slot 2      4    1    B   0x6b  3 4 5 6 7 10 11 12 14 15
slot 2      4    1    C   0x68  3 4 5 6 7 10 11 12 14 15
slot 2      4    1    D   0x69  3 4 5 6 7 10 11 12 14 15
slot 3      4    2    A   0x6b  3 4 5 6 7 10 11 12 14 15
slot 3      4    2    B   0x68  3 4 5 6 7 10 11 12 14 15
slot 3      4    2    C   0x69  3 4 5 6 7 10 11 12 14 15
slot 3      4    2    D   0x6a  3 4 5 6 7 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    1    0    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    1    0    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    1    0    D   0x63  3 4 5 6 7 10 11 12 14 15
embedded    2    0    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    2    0    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    2    0    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    2    0    D   0x63  3 4 5 6 7 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   15   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   15   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   14   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   14   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x29a0, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x29a1, revid=0x02
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2834, revid=0x02
	bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 0000e000, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2835, revid=0x02
	bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	map[20]: type 4, range 32, base 0000e080, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x283a, revid=0x02
	bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base febff400, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x283f, revid=0x02
	bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2847, revid=0x02
	bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2830, revid=0x02
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	map[20]: type 4, range 32, base 0000d800, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2831, revid=0x02
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type 4, range 32, base 0000d880, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2832, revid=0x02
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	map[20]: type 4, range 32, base 0000dc00, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x2836, revid=0x02
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base febff000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x244e, revid=0xf2
	bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2810, revid=0x02
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2824, revid=0x02
	bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type 4, range 32, base 0000ec00, size  3, enabled
	map[14]: type 4, range 32, base 0000e880, size  2, enabled
	map[18]: type 4, range 32, base 0000e800, size  3, enabled
	map[1c]: type 4, range 32, base 0000e480, size  2, enabled
	map[20]: type 4, range 32, base 0000e400, size  5, enabled
	map[24]: type 1, range 32, base febff800, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x283e, revid=0x02
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[10]: type 1, range 32, base 00000000, size  8, memory disabled
	map[20]: type 4, range 32, base 00000400, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xfa700000-0xfe7fffff
pcib1:   prefetched decode 0xbfe00000-0xdfdfffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x10de, dev=0x0163, revid=0xa1
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib1: (null) requested memory range 0xfd000000-0xfdffffff: good
	map[14]: type 3, range 64, base c0000000, size 28, enabled
pcib1: (null) requested memory range 0xc0000000-0xcfffffff: good
	map[1c]: type 1, range 64, base fc000000, size 24, enabled
pcib1: (null) requested memory range 0xfc000000-0xfcffffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at
device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 17 at
device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe080
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff
irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebff400
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2:   secondary bus     3
pcib2:   subordinate bus   3
pcib2:   I/O decode        0x0-0x0
pcib2:   memory decode     0xfff00000-0xfffff
pcib2:   prefetched decode 0xdfe00000-0xdfefffff
pci3: <ACPI PCI bus> on pcib2
pci3: physical bus=3
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib3:   secondary bus     2
pcib3:   subordinate bus   2
pcib3:   I/O decode        0xb000-0xbfff
pcib3:   memory decode     0xfe800000-0xfe8fffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib3
pci2: physical bus=2
found->	vendor=0x197b, dev=0x2363, revid=0x02
	bus=2, slot=0, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000bc00, size  3, enabled
pcib3: (null) requested I/O range 0xbc00-0xbc07: in range
	map[14]: type 4, range 32, base 0000b880, size  2, enabled
pcib3: (null) requested I/O range 0xb880-0xb883: in range
	map[18]: type 4, range 32, base 0000b800, size  3, enabled
pcib3: (null) requested I/O range 0xb800-0xb807: in range
	map[1c]: type 4, range 32, base 0000b480, size  2, enabled
pcib3: (null) requested I/O range 0xb480-0xb483: in range
	map[20]: type 4, range 32, base 0000b400, size  4, enabled
pcib3: (null) requested I/O range 0xb400-0xb40f: in range
	map[24]: type 1, range 32, base fe8fe000, size 13, enabled
pcib3: (null) requested memory range 0xfe8fe000-0xfe8fffff: good
pcib3: matched entry for 2.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
atapci0: <JMicron JMB363 SATA300 controller> port
0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f
mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb400
atapci0: [MPSAFE]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfe8fe000
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xbc00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb880
ata4: reset tp1 mask=03 ostat0=51 ostat1=50
ata4: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata4: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata4: [MPSAFE]
uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at
device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at
device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at
device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff000-0xfebff3ff
irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebff000
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xc000-0xcfff
pcib4:   memory decode     0xfe900000-0xfeafffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pcib4:   Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found->	vendor=0x8086, dev=0x1076, revid=0x00
	bus=4, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0230, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=14
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 32, base feae0000, size 17, enabled
pcib4: (null) requested memory range 0xfeae0000-0xfeafffff: good
	map[14]: type 1, range 32, base feac0000, size 17, enabled
pcib4: (null) requested memory range 0xfeac0000-0xfeadffff: good
	map[18]: type 4, range 32, base 0000cc00, size  6, enabled
pcib4: (null) requested I/O range 0xcc00-0xcc3f: in range
pcib4: matched entry for 4.1.INTA
pcib4: slot 1 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x1076, revid=0x00
	bus=4, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0230, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 32, base fea80000, size 17, enabled
pcib4: (null) requested memory range 0xfea80000-0xfea9ffff: good
	map[14]: type 1, range 32, base fea60000, size 17, enabled
pcib4: (null) requested memory range 0xfea60000-0xfea7ffff: good
	map[18]: type 4, range 32, base 0000c880, size  6, enabled
pcib4: (null) requested I/O range 0xc880-0xc8bf: in range
pcib4: matched entry for 4.2.INTA
pcib4: slot 2 INTA hardwired to IRQ 23
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0xcc00-0xcc3f mem 0xfeae0000-0xfeafffff,0xfeac0000-0xfeadffff irq 22
at device 1.0 on pci4
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeae0000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xcc00
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:0e:0c:6c:b9:16
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0xc880-0xc8bf mem 0xfea80000-0xfea9ffff,0xfea60000-0xfea7ffff irq 23
at device 2.0 on pci4
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfea80000
em1: Reserved 0x40 bytes for rid 0x18 type 4 at 0xc880
em1: [MPSAFE]
em1: bpf attached
em1: Ethernet address: 00:0e:0c:6c:b9:0a
em1:  Speed:N/A  Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f
mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
atapci1: [MPSAFE]
atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfebff800
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata5: <ATA channel 0> on atapci1
ata5: SATA connect ready time=0ms
ata5: sata_connect devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata6: <ATA channel 1> on atapci1
ata6: SATA connect ready time=0ms
ata6: sata_connect devices=0x1<ATA_MASTER>
ata6: [MPSAFE]
ata7: <ATA channel 2> on atapci1
ata7: SATA connect status=00000000
ata7: [MPSAFE]
ata8: <ATA channel 3> on atapci1
ata8: SATA connect status=00000000
ata8: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: irq maps: 0xcc29 0xcc39 0xcc29 0xcc29
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 56
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7
drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 57
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 59
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd1800-0xd27ff,0xd2800-0xd37ff on isa0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 60
ata0: [MPSAFE]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 61
ata1: [MPSAFE]
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xcca9 0xcca9 0xcca9 0xcca9
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ugen0: APC Back-UPS ES 500 FW:801.e5.D USB FW:e5, rev 1.10/1.06, addr 2
Device configuration finished.
Reducing kern.maxvnodes 134347 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99937769 hz
Timecounter "TSC" frequency 3397890062 Hz quality -100
Timecounters tick every 1.000 msec
pflog0: bpf attached
lo0: bpf attached
em1: Link is up 1000 Mbps Full Duplex
ata4-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad8: 152627MB <WDC WD1600JB-00EVA0 15.05R15> at ata4-master UDMA100
ad8: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
acd0: <SONY DVD RW DRU-800A/KY01> DVDR drive at ata4 as slave
acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 381554MB <Seagate ST3400633AS 3.AAH> at ata5-master SATA150
ad10: 781422768 sectors [775221C/16H/63S] 16 sectors/interrupt 1 depth queue
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad12: 114440MB <Seagate ST3120026AS 8.05> at ata6-master SATA150
ad12: 234375000 sectors [232514C/16H/63S] 16 sectors/interrupt 1 depth queue
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
GEOM: new disk ad8
GEOM: new disk ad10
GEOM: new disk ad12
Trying to mount root from ufs:/dev/ad10s1a
start_init: trying /sbin/init
WARNING: /backup was not properly dismounted
WARNING: /extra was not properly dismounted
em0: Link is up 100 Mbps Full Duplex
em0: link state changed to UP
Linux ELF exec handler installed
em1: Link is up 1000 Mbps Full Duplex
ata4: reiniting channel ..
ata4: reset tp1 mask=03 ostat0=50 ostat1=51
ata4: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata4: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata4: reinit done ..
========================================================

pciconf -l output:
========================================================
hostb0 at pci0:0:0:	class=0x060000 card=0x81ea1043 chip=0x29a08086
rev=0x02 hdr=0x00
pcib1 at pci0:1:0:	class=0x060400 card=0x00000088 chip=0x29a18086 rev=0x02 hdr=0x01
uhci0 at pci0:26:0:	class=0x0c0300 card=0x81ec1043 chip=0x28348086
rev=0x02 hdr=0x00
uhci1 at pci0:26:1:	class=0x0c0300 card=0x81ec1043 chip=0x28358086
rev=0x02 hdr=0x00
ehci0 at pci0:26:7:	class=0x0c0320 card=0x81ec1043 chip=0x283a8086
rev=0x02 hdr=0x00
pcib2 at pci0:28:0:	class=0x060400 card=0x00000040 chip=0x283f8086
rev=0x02 hdr=0x01
pcib3 at pci0:28:4:	class=0x060400 card=0x00000040 chip=0x28478086
rev=0x02 hdr=0x01
uhci2 at pci0:29:0:	class=0x0c0300 card=0x81ec1043 chip=0x28308086
rev=0x02 hdr=0x00
uhci3 at pci0:29:1:	class=0x0c0300 card=0x81ec1043 chip=0x28318086
rev=0x02 hdr=0x00
uhci4 at pci0:29:2:	class=0x0c0300 card=0x81ec1043 chip=0x28328086
rev=0x02 hdr=0x00
ehci1 at pci0:29:7:	class=0x0c0320 card=0x81ec1043 chip=0x28368086
rev=0x02 hdr=0x00
pcib4 at pci0:30:0:	class=0x060401 card=0x00000050 chip=0x244e8086
rev=0xf2 hdr=0x01
isab0 at pci0:31:0:	class=0x060100 card=0x81ec1043 chip=0x28108086
rev=0x02 hdr=0x00
atapci1 at pci0:31:2:	class=0x010601 card=0x81ec1043 chip=0x28248086
rev=0x02 hdr=0x00
none0 at pci0:31:3:	class=0x0c0500 card=0x81ec1043 chip=0x283e8086
rev=0x02 hdr=0x00
none1 at pci1:0:0:	class=0x030000 card=0x00000000 chip=0x016310de rev=0xa1 hdr=0x00
atapci0 at pci2:0:0:	class=0x010185 card=0x81e41043 chip=0x2363197b
rev=0x02 hdr=0x00
em0 at pci4:1:0:	class=0x020000 card=0x11768086 chip=0x10768086 rev=0x00 hdr=0x00
em1 at pci4:2:0:	class=0x020000 card=0x11768086 chip=0x10768086 rev=0x00 hdr=0x00
========================================================

atacontrol list output:
========================================================
ATA channel 0:
    Master:      no device present
    Slave:       no device present
ATA channel 1:
    Master:      no device present
    Slave:       no device present
ATA channel 2:
    Master:      no device present
    Slave:       no device present
ATA channel 3:
    Master:      no device present
    Slave:       no device present
ATA channel 4:
    Master:  ad8 <WDC WD1600JB-00EVA0/15.05R15> ATA/ATAPI revision 6
    Slave:  acd0 <SONY DVD RW DRU-800A/KY01> ATA/ATAPI revision 5
ATA channel 5:
    Master: ad10 <ST3400633AS/3.AAH> Serial ATA v1.0
    Slave:       no device present
ATA channel 6:
    Master: ad12 <ST3120026AS/8.05> Serial ATA v1.0
    Slave:       no device present
ATA channel 7:
    Master:      no device present
    Slave:       no device present
ATA channel 8:
    Master:      no device present
    Slave:       no device present
========================================================


More information about the freebsd-current mailing list