CD Burning problem

Beecher Rintoul akbeech at
Tue Sep 20 01:51:13 PDT 2005

On Monday 19 September 2005 11:40 pm, Peter Jeremy wrote:
> On Mon, 2005-Sep-19 13:48:26 -0800, Beecher Rintoul wrote:
> >Sorry for the cross post, I meant to send this to current in the first
> > place. Since upgrading a couple of times, I'm now seeing this error when
> > burning to a CD/RW:
> We need a bit more background.  What is your ATA controller and how are
> the disks/CD's connected to the channels?  Can you post the extracts
> from a dmesg.
> I've seen the "swap_pager: indefinite wait" when burning data to a DVD on
> the same channel as the swap disk.

stargate# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #6: Sat Sep 17 05:36:55 AKDT 2005
    root at stargate:/usr/obj/usr/src/sys/STARGATE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (400.16-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
real memory  = 268369920 (255 MB)
avail memory = 253136896 (241 MB)
ACPI disabled by blacklist.  Contact your BIOS vendor.
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <SiS 620 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on 
atapci0: <SiS 620 UDMA66 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xdcf0-0xdcff at device 0.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown> at device 1.1 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xfedff000-0xfedfffff irq 11 at device 
1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 
0xfedfe000-0xfedfefff,0xfec00000-0xfecfffff irq 10 at device 6.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: <CS461x PCM Audio> on csa0
pcm0: <Cirrus Logic CS4297 AC97 Codec>
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xd800-0xd8ff mem 
0xfedfdc00-0xfedfdcff irq 3 at device 10.0 on pci0
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:a0:cc:e0:78:1e
rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xd400-0xd4ff mem 
0xfedfd800-0xfedfd8ff irq 9 at device 11.0 on pci0
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0d:88:26:95:20
ndis0: <D-Link AirPremier DWL-AG530 Wireless PCI Adapter> mem 
0xfede0000-0xfedeffff irq 9 at device 12.0 on pci0
can't re-use a leaf (BusType)!
ndis0: NDIS API version: 5.1
NDIS: could not find file regAdd.txt in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
ndis0: Ethernet address: 00:11:95:8b:a7:0b
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xeffff pnpid ORM0000 
on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on 
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 400158585 Hz quality 800
Timecounters tick every 1.000 msec
IP Filter: v4.1.8 initialized.  Default = pass all, Logging = enabled
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: 19092MB <WDC WD200BB-00DEA0 05.03E05> at ata0-master UDMA33
ad2: DMA limited to UDMA33, controller found non-ATA66 cable
ad2: 16231MB <WDC WD170AA 29.05T29> at ata1-master UDMA33
acd0: CDRW <LG CD-RW CED-8042B/1.07> at ata1-slave PIO4
cd0 at ata1 bus 0 target 1 lun 0
cd0: <LG CD-RW CED-8042B 1.07> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a

Hope this helps.


Beech Rintoul - System Administrator - akbeech at
/"\   ASCII Ribbon Campaign  | NorthWind Communications
\ / - NO HTML/RTF in e-mail  | 201 East 9th Avenue Ste.310
 X  - NO Word docs in e-mail | Anchorage, AK 99501
/ \ 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url :

More information about the freebsd-current mailing list