Installation error Intel mobile ICH6M SATA controller.
Armin Gruner
ag-usenet at muc.de
Sun Sep 4 04:32:56 PDT 2005
Hi,
we are happily running FreeBSD 5.4/5-STABLE on a D915GEV intel board..
atapci1: <Intel ICH6 SATA150 controller>
port 0xd800-0xd80f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807
irq 19 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
ad4: 381554MB <ST3400832AS/3.03> [775221/16/63] at ata2-master SATA150
ad5: 238475MB <WDC WD2500SD-01KCB0> [484521/16/63] at ata2-slave SATA150
atapci1 at pci0:31:2:
class=0x01018f card=0x45568086 chip=0x26518086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FW ICH6/ICH6W SATA Controller'
class = mass storage
subclass = ATA
As this is a backup server, it slurps up to 400GB each night
(with 500 MBit/s peak) via an em0 1000baseTX
(the on-board Marvell chip is unfortunately not recognized yet).
Regards, Armin
In article <20050904043646.68612.qmail at web33515.mail.mud.yahoo.com>,
Dean Patterson wrote:
>Do you have the Intel 915GM chipset and the ICH6M SATA controller?
>
>--- Eric Anderson <anderson at centtech.com> wrote:
>
>> Dean Patterson wrote:
>> > Well I checked it using the shell and it was
>> marked as
>> > active. But the problem is that the ATA driver
>> only
>> > supports up to ICH5, per the man pages. So how is
>> > that situation handled? I assume that I am NEVER
>> > going to run FBSD on this laptop?
>>
>> For what it's worth, I ran 5.4, 6.0, and 7.0 on a
>> D610 with no problems.
>>
--
Armin Gruner ____ mailto:ag at muc.de
``Nur wer sich aendert, bleibt \ / http://www.muc.de/~ag/
sich treu'' - Wolf Biermann \/ PGP Key: 0x72DBE671 or finger -l ag at muc.de
More information about the freebsd-current
mailing list