6.0-RC1 kernel Panic on load of mpt

Nathaniel Clark nclark at cambex.com
Tue Oct 18 10:01:18 PDT 2005 

I'm trying to use an LSI 7202XP-LC (chipset FC929X, driver mpt) in a dual 
Xeon (w/ HTT) and 16GB of memory.  Everything has the newest BIOS revs 
available.

If anyone has any insight that would be fantastic.

Attached are my kernel config and the dmesg dump when the LSI board isn't 
installed.

Here is the dump/info from when it is (copied by hand):

port 0x3000-0x30FF
mem 0xd0210000-0xd021FFFF, 0xd0200000-0xd020FFFF
dev 3.0 on pci3
irq 28

-------
mpt(0): MPI Version=1.3.2.0
mpt(0): Unhandled Event Notify Frame. Event 0xa.
mpt(0): mps_wait_req timed out
mpt(0): port enable timed out
mpt(0): failed to enable port 0
mpt(0): Unable to initialize IOC
--------

"Fatal Trap 9: general protection fault while in kernel mode"

it will also generate

"Fatel Trap 12: page fault while in kernel mode"

-------- this is specifically from when I recieved a Trap 9 ------
cpuid=0 apic id=0
instruction pointer     0x20:0xc049b4cf
stack pointer           0x28:0xc08f69f0
frame pointer           0x28:0xc08f69f4
code segment            base 0x0, limit 0xffff, type 0x1b
                                 DLP 0, pres 1, def32 1, gran 1
processor eflags                interrupt enabled, resume, IOPL=0
current process         0 (swapper)

bus_dmamap_destroy      @ +0x1b
mpt_dma_mem_free                @ +0x4f
mpt_pci_attach          @ +0x4de
device_attach           @ +0x58
-------------- next part --------------
A non-text attachment was scrubbed...
Name: MYi386
Type: application/octet-stream
Size: 11896 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20051018/1744db2b/MYi386.obj
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RC1 #2: Tue Oct 18 11:39:39 EDT 2005
    root at x6da8.cambex.com:/usr/src/sys/i386/compile/MYi386
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: debug.mpsafenet forced to 0 as aio requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <PTLTD  	 APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x459d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,<b14>>
  AMD Features=0x20000000<LM>
  Hyperthreading: 2 logical CPUs
real memory  = 17985175552 (17152 MB)
avail memory = 16833306624 (16053 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xd0200000-0xd0201fff irq 32 at device 2.0 on pci3
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2c00-0x2cff,0x2800-0x28ff mem 0xd0202000-0xd0203fff irq 33 at device 2.1 on pci3
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pci2: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x3000-0x303f mem 0xd0300000-0xd031ffff irq 54 at device 2.0 on pci4
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:30:48:25:b3:1f
em0:  Speed:N/A  Duplex:N/A
pci2: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <display, VGA> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcd000-0xcdfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
ad0: 4112MB <Seagate ST34313A 3.13> at ata0-master UDMA66
acd0: DVDROM <HL-DT-STDVD-ROM GDR8082N/0002> at ata1-slave UDMA33
ses0 at ahd0 bus 0 target 8 lun 0
ses0: <SUPER GEM359 REV001 1.09> Fixed Processor SCSI-2 device 
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahd0 bus 0 target 0 lun 0
da0: <SEAGATE ST39173LC 6685> Fixed Direct Access SCSI-2 device 
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8682MB (17781521 512 byte sectors: 255H 63S/T 1106C)
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Swap zone entries reduced from 121574 to 54032.
Trying to mount root from ufs:/dev/da0s1a

More information about the freebsd-current mailing list