6.0-RC1: reboot when trying to load X.org
Marcin Jessa
lists at yazzy.org
Thu Oct 13 07:50:52 PDT 2005
On Thu, 13 Oct 2005 10:48:43 -0300
Felipe openglx <openglx at StarByte.net> wrote:
> Hi all,
>
> this is my first post, and I'm quite new to FreeBSD. Don't push me
> too hard :)
>
> Last night I've upgraded a (well) running FreeBSD-5.4 install to
> 6.0-RC1 and had it running without problems. Well, mind you, ALMOST
> without problems.
>
> When trying to start X.org server (using GDM, using "startx" command
> line, or even using "X" command line), my machine freezes for a few
> seconds before rebooting instantly. My first thought was that the
> X.org port wasn't compiled for 6.0-RC1, so I recompiled it. Nope, it
> still crashes. So I ran X with verbose level 9, and got this (if this
> isn't the right place to paste large text blocks, SORRY! Just tell me
> where should I read the mailing-lists etiquete):
Just a thought but did you compile your kernel with:
options COMPAT_FREEBSD5
?
> openglx at volahia:~$ X -verbose 9 -logverbose 9 tty08 :0
>
> X Window System Version 6.8.2
> Release Date: 9 February 2005
> X Protocol Version 11, Revision 0, Release 6.8.2
> Build Operating System: FreeBSD 6.0 i386 [ELF]
> Current Operating System: FreeBSD volahia.starbyte.net 6.0-RC1 FreeBSD
> 6.0-RC1 #0: Sun Oct 9 20:32:57 UTC 2005
> root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC i386
> Build Date: 13 October 2005
> Before reporting problems, check http://wiki.X.Org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 13 10:32:08 2005
> (==) Using config file: "/usr/X11R6/lib/X11/xorg.conf"
> (==) ServerLayout "X.org Configured"
> (**) |-->Screen "Screen0" (0)
> (**) | |-->Monitor "Monitor0"
> (**) | |-->Device "Card0"
> (**) |-->Input Device "Mouse0"
> (**) |-->Input Device "Keyboard0"
> (WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
> Entry deleted from font path.
> (**) FontPath set to
> "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (**) ModulePath set to "/usr/X11R6/lib/modules"
> (**) Option "DontZap"
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.2
> X.Org Video Driver: 0.7
> X.Org XInput driver : 0.4
> X.Org Server Extension : 0.2
> X.Org Font Renderer : 0.4
> (II) Loader running on freebsd
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
>
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 21 class
> 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev
> d0 class 01,01,8a hdr 80 (II) PCI: 00:01:0: chip 1039,0008 card
> 0000,0000 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip
> 1039,0900 card 1039,0900 rev 83 class 02,00,00 hdr 00 (II) PCI:
> 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
> (II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class
> 06,04,00 hdr 01 (II) PCI: 01:00:0: chip 1039,6300 card 1039,6300 rev
> 21 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI
> bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008
> (VGA_EN is set) (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN
> is set) (II) PCI-to-PCI bridge:
> (II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is
> set) (II) Bus 1 I/O range:
> [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0 0xefe00000 - 0xefefffff (0x100000) MX[B]
> (II) Bus 1 prefetchable memory range:
> [0] -1 0 0xdfc00000 - 0xefcfffff (0x10100000) MX[B]
> (--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] SiS630 GUI
> Accelerator+3D rev 33, Mem @ 0xe0000000/27, 0xefee0000/17, I/O @
> 0xcc80/7
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) PCI Memory resource overlap reduced 0xf4000000 from 0xf7ffffff to
> 0xf3ffffff
> (II) Active PCI resource ranges:
> [0] -1 0 0xf3fff000 - 0xf3ffffff (0x1000) MX[B]E
> [1] -1 0 0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]E
> [2] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]EO
> [3] -1 0 0xefee0000 - 0xefefffff (0x20000) MX[B](B)
> [4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
> [5] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B]E
> [6] -1 0 0x0000dc00 - 0x0000dcff (0x100)(II) Loading
> /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
> (II) Module drm: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading sub module "GLcore"
> (II) LoadModule: "GLcore"
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Module GLcore: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension GLX
> (II) LoadModule: "record"
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.13.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension RECORD
> (II) LoadModule: "xtrap"
> (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
> (II) Module xtrap: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension DEC-XTRAP
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
> (II) Module freetype: vendor="X.Org Foundation & the After X-TT
> Project" compiled for 6.8.2, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font FreeType
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.2
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "sis"
> (II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
> (II) Module sis: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 0.7.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 0.7
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.4
> (II) LoadModule: "kbd"
> (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.4
> (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
> SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315,
> SIS315H, SIS315PRO, SIS550, SIS650/M650/651/740, SIS330(Xabre),
> SIS660/661FX/M661FX/M661MX/741/741GX/M741/760/M760, SIS340
> (II) Primary Device is: PCI 01:00:0
> (**) Chipset override: SIS630/730
> (**) Chipset SIS630/730 found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xf3fff000 - 0xf3ffffff (0x1000) MX[B]E
> [6] -1 0 0xf3ffe000 - 0xf3ffefff (0x1000) MX[B]E
> [7] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]EO
> [8] -1 0 0xefee0000 - 0xefefffff (0x20000) MX[B](B)
> [9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
> [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B]E
> [13] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
> [14] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> [15] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
> [16] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
> [17] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
> [18] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
> [19] -1 0 0x0000cc80 - 0x0000ccff (0x80) IX[B](B)
> (II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xf3fff000 - 0xf3ffffff (0x1000) MX[B]E
> [6] -1 0 0xf3ffe000 - 0xf3ffefff (0x1000) MX[B]E
> [7] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]EO
> [8] -1 0 0xefee0000 - 0xefefffff (0x20000) MX[B](B)
> [9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
> [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [15] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B]E
> [16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
> [17] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> [18] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
> [19] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
> [20] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
> [21] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
> [22] -1 0 0x0000cc80 - 0x0000ccff (0x80) IX[B](B)
> [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 0.1.0
> ABI class: X.Org Video Driver, version 0.7
> (II) SIS(0): SiS driver (2004/08/20-1)
> (II) SIS(0): Copyright (C) 2001-2004 Thomas Winischhofer
> <thomas at winischhofer.net> and others
> (II) SIS(0): Compiled for X.org version 6.8.2.0
> (II) SIS(0): See http://www.winischhofer.net/linuxsisvga.shtml for
> documentation and updates
> (--) SIS(0): This adapter is primary display adapter
> (==) SIS(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0xc900 (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="X.Org Foundation"
> compiled for 6.8.2
>
> [and stops there. At this point the machine starts to reboot itself.
> I've managed to get that information connecting from a remote host
> using SSH.].
>
> volahia is the machine name, as you may wonder. It's a Pentium III
> 1GHz, 512MB RAM, with three IDE devices (two HDs and one CD-ROM). It
> has everything "on-board", where:
> * SiS900 ethernet card (working perfectly)
> * Sis7018 sound card (have a few problems recording sound, but it
> isn't the matter now)
> * SiS630 video card (looks like there's some driver problem, are you
> sure that "ramdac" should be loaded for on-board video cards?)
>
> The dmesg output for me:
> openglx at volahia:~$ dmesg
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994 The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-RC1 #0: Sun Oct 9 20:32:57 UTC 2005
> root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel Pentium III (1002.28-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x68a Stepping = 10
> Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
> real memory = 520028160 (495 MB)
> avail memory = 499531776 (476 MB)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <AMIINT AMIINT16> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
> pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
> pci_link4: <ACPI PCI Link LNKU> irq 0 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <SiS 630 host to AGP bridge> mem 0xf4000000-0xf7ffffff at device
> 0.0 on pci0
> atapci0: <SiS 630 UDMA66 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 0.1 on
> pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> isab0: <PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> sis0: <SiS 900 10/100BaseTX> port 0xdc00-0xdcff mem
> 0xf3ffe000-0xf3ffefff irq 11 at device 1.1 on pci0
> miibus0: <MII bus> on sis0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> sis0: Ethernet address: 00:07:95:c4:65:80
> pcm0: <SiS 7018> port 0xde00-0xdeff mem 0xf3fff000-0xf3ffffff irq 10
> at device 1.4 on pci0
> pcm0: <ICEnsemble ICE1232 AC97 Codec>
> pcm0: [GIANT-LOCKED]
> pcib1: <PCI-PCI bridge> at device 2.0 on pci0
> pci1: <PCI bus> on pcib1
> drm0: <SiS 630> port 0xcc80-0xccff mem
> 0xe0000000-0xe7ffffff,0xefee0000-0xefefffff at device 0.0 on pci1
> info: [drm] AGP at 0xf4000000 64MB
> info: [drm] Initialized sis 1.1.0 20030826 on minor 0
> acpi_button1: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq
> 6 drq 2 on acpi0
> fdc0: [FAST]
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
> on acpi0 sio0: type 16550A
> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7
> drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd3fff on
> isa0 sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0 Timecounter "TSC" frequency 1002277240 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: DMA limited to UDMA33, controller found non-ATA66 cable
> ad0: 39083MB <Maxtor 4D040K2 DAH017K0> at ata0-master UDMA33
> ad1: DMA limited to UDMA33, controller found non-ATA66 cable
> ad1: 114498MB <SAMSUNG SP1203N TL100-30> at ata0-slave UDMA33
> acd0: CDRW <HL-DT-ST RW/DVD GCC-4480B/1.00> at ata1-slave UDMA33
> Trying to mount root from ufs:/dev/ad0s2a
> WARNING: / was not properly dismounted
> WARNING: /tmp was not properly dismounted
> WARNING: /usr was not properly dismounted
> WARNING: /var was not properly dismounted
> WARNING: /media/ad1s1d was not properly dismounted
> WARNING: /media/ad1s4d was not properly dismounted
> sis0: link state changed to UP
> no matching session
>
> [Ignore the "no matching session" error, it is related to PPPoE
> sessioning].
>
> I had to disable GDM auto-start, otherwise the machine would be
> rebooting itself everytime. Any idea on how we should work on that
> X.org problem? Note that the machine was working perfectly on
> FreeBSD-5.4, FreeBSD-5.2.1, Linux (Debian 3.0 and 3.1, Slackware 9,
> 9.1, 10), Windows (XP, 98), and FreeeDOS.
>
> If more information if needed, I can provide.
>
> Thanks in advance.
>
> --
> openglx at StarByte.net
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to
> "freebsd-current-unsubscribe at freebsd.org"
More information about the freebsd-current
mailing list