6.0-BETA5: Sees only first ATA RAID volume
Søren Schmidt
sos at FreeBSD.org
Sun Oct 9 23:25:04 PDT 2005
On 09/10/2005, at 22:01, Thomas Quinot wrote:
> Hi *,
>
> Doing some experiments on a Dell Precision 380 with ICH7 (Intel
> MatrixRAID) SATA RAID controller. There are three 160 Gb SATA disks
> in the machine.
>
> In the BIOS, I configured two RAID volumes:
> * one mirror (RAID1) with a capacity of 110 Gb, involving the
> first two disks (leaving 50 Gb of free space on each disk);
> * one striped (RAID0) using the remainder of the space of each
> of the first two disks.
>
> (the 3rd disk is completely outside of the RAID system).
>
> When booting up, I see the three physical disks as ad4, ad6, and ad8,
> buth only the first RAID volume as ar0 (with a disk size that looks
> like
> the expected 110 Gb) - I do not see any ar1 striped volume.
>
> Is this a bug? A known limitation? Anything specific I need to set up?
From ata-raid.c::ata_raid_intel_read_meta()
/*
* update our knowledge about the array config based on
generation
* we only grap the first volume description (yet) since the
* BIOS'n I have access to puts crap into the following ones
*/
There's your explanation :)
When/If I get my hands on HW that supports this I'll add the support
to the ataraid driver..
BTW it knows how to deal with multiple RAID's on the same disks, but
no BIOS's I've had access to so far has allowed this yet...
Søren Schmidt
sos at FreeBSD.org
More information about the freebsd-current
mailing list