ath driver panics on 6-STABLE (LOR)

[Dario Freni]

On Sun, Nov 13, 2005 at 09:41:37AM -0800, Sam Leffler wrote:
> Disable protection or nuke the code in ath_tx_start that updates CTS 
> when bursting.  The latter is what I've done in my tree and in the next 
> hal rev the api is removed.

There's no protection since yesterday. I was trying to understand if
it was WPA's fault, but apparently not:

# ifconfig ath0
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::213:46ff:fe61:6697%ath0 prefixlen 64 scopeid 0x3 
        inet 192.168.99.10 netmask 0xffffff00 broadcast 192.168.99.255
        ether 00:13:46:61:66:97
        media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/54Mbps)
        status: associated
        ssid SATNET channel 11 bssid 00:0f:b5:9b:3a:a5
        authmode OPEN privacy OFF txpowmax 36 protmode CTS bintval 100

FWIW, i've also tried with your patches to ath and net80211 and the
new hal found on http://people.freebsd.org/~sam/ with no success. If
it helps, I can try recompiling with those patches applied and obtain
the backtrace.

Thanks in advance,
Dario

-- 
Dario Freni (saturnero at freesbie.org)
FreeSBIE developer (http://www.freesbie.org)
GPG Public key at http://www.saturnero.net/saturnero.asc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20051113/d04fdfa1/attachment.bin