sk interface (Marvell 88E8001) sluggish?
Nicolas Blais
nb_root at videotron.ca
Wed May 18 15:30:27 PDT 2005
On May 18, 2005 06:12 pm, Bjoern A. Zeeb wrote:
> On Wed, 18 May 2005, Nicolas Blais wrote:
>
> I just checked you original mail and seen:
> > skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
>
> 0x9 is strange.
>
> could you please sent me (private mail is ok) an output of
> bootverbose along with pciconf -lv output?
Sorry, here is both files :
-------------- next part --------------
mem: <memory>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 00 01 00 01 14 01 00 01 2a 01 00 01 2f 01
00 01 6a 00 02 01 04 01 82 01 0d 01 0e 01 0f 01
20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01
VESA: 56 mode(s) found
VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc09d66c2 (1000022)
VESA: ATI RADEON 9600 PRO
VESA: ATI Technologies Inc. V350 01.00
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=02821106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00f59f0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 7 10 11 14 15
embedded 0 1 B 0x02 3 4 5 7 10 11 14 15
embedded 0 17 C 0x03 3 4 5 7 10 11 14 15
embedded 0 15 A 0x01 3 4 5 7 10 11 14 15
embedded 0 15 B 0x02 3 4 5 7 10 11 14 15
embedded 0 15 C 0x03 3 4 5 7 10 11 14 15
embedded 0 15 D 0x05 3 4 5 7 10 11 14 15
embedded 0 16 A 0x01 3 4 5 7 10 11 14 15
embedded 0 16 B 0x02 3 4 5 7 10 11 14 15
embedded 0 16 C 0x03 3 4 5 7 10 11 14 15
embedded 0 16 D 0x05 3 4 5 7 10 11 14 15
slot 1 0 11 A 0x01 3 4 5 7 10 11 14 15
slot 1 0 11 B 0x02 3 4 5 7 10 11 14 15
slot 1 0 11 C 0x03 3 4 5 7 10 11 14 15
slot 1 0 11 D 0x05 3 4 5 7 10 11 14 15
slot 2 0 12 A 0x02 3 4 5 7 10 11 14 15
slot 2 0 12 B 0x03 3 4 5 7 10 11 14 15
slot 2 0 12 C 0x05 3 4 5 7 10 11 14 15
slot 2 0 12 D 0x01 3 4 5 7 10 11 14 15
slot 3 0 13 A 0x03 3 4 5 7 10 11 14 15
slot 3 0 13 B 0x05 3 4 5 7 10 11 14 15
slot 3 0 13 C 0x01 3 4 5 7 10 11 14 15
slot 3 0 13 D 0x02 3 4 5 7 10 11 14 15
slot 4 0 14 A 0x05 3 4 5 7 10 11 14 15
slot 4 0 14 B 0x01 3 4 5 7 10 11 14 15
slot 4 0 14 C 0x02 3 4 5 7 10 11 14 15
slot 4 0 14 D 0x03 3 4 5 7 10 11 14 15
slot 5 0 9 A 0x01 3 4 5 7 10 11 14 15
slot 5 0 9 B 0x02 3 4 5 7 10 11 14 15
slot 5 0 9 C 0x03 3 4 5 7 10 11 14 15
slot 5 0 9 D 0x05 3 4 5 7 10 11 14 15
embedded 0 7 A 0x01 3 4 5 7 10 11 14 15
embedded 0 10 A 0x02 3 4 5 7 10 11 14 15
embedded 0 8 A 0x03 3 4 5 7 10 11 14 15
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 10 11 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 10 11 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 10 11 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 10 11 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 10 11 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 10 11 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 14 15
ACPI timer: 1/2 1/1 1/2 1/2 1/1 1/2 1/2 1/1 1/2 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0282, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x1106, dev=0x1282, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2282, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3282, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4282, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7282, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb188, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3044, revid=0x80
bus=0, slot=7, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base fbc00000, size 11, enabled
map[14]: type 4, range 32, base 0000d800, size 7, enabled
pcib0: matched entry for 0.7.INTA (src \\_SB_.LNKA:0)
pcib0: slot 7 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x109e, dev=0x036e, revid=0x11
bus=0, slot=9, func=0
class=04-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base e3e00000, size 12, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.LNKA:0)
pcib0: slot 9 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x109e, dev=0x0878, revid=0x11
bus=0, slot=9, func=1
class=04-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base e3f00000, size 12, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.LNKA:0)
pcib0: slot 9 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x11ab, dev=0x4320, revid=0x13
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fbb00000, size 14, enabled
map[14]: type 4, range 32, base 0000d400, size 8, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.LNKB:0)
pcib0: slot 10 INTA routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x1106, dev=0x3149, revid=0x80
bus=0, slot=15, func=0
class=01-04-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000d000, size 3, enabled
map[14]: type 4, range 32, base 0000c800, size 2, enabled
map[18]: type 4, range 32, base 0000c400, size 3, enabled
map[1c]: type 4, range 32, base 0000c000, size 2, enabled
map[20]: type 4, range 32, base 0000b800, size 4, enabled
map[24]: type 4, range 32, base 0000b400, size 8, enabled
pcib0: matched entry for 0.15.INTB (src \\_SB_.LNKB:0)
pcib0: slot 15 INTB routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000a000, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKA:0)
pcib0: slot 16 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000a400, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKA:0)
pcib0: slot 16 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000a800, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.LNKB:0)
pcib0: slot 16 INTB routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=3
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000b000, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.LNKB:0)
pcib0: slot 16 INTB routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x1106, dev=0x3104, revid=0x86
bus=0, slot=16, func=4
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fb800000, size 8, enabled
pcib0: matched entry for 0.16.INTC (src \\_SB_.LNKC:0)
pcib0: slot 16 INTC routed to irq 5 via \\_SB_.LNKC
found-> vendor=0x1106, dev=0x3227, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3059, revid=0x60
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00009800, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.LNKC:0)
pcib0: slot 17 INTC routed to irq 5 via \\_SB_.LNKC
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
AMD64: 1 Misc. Control unit(s) found.
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000
agp0: allocating GATT for aperture of size 32M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfbd00000-0xfbffffff
pcib1: prefetched decode 0xe8000000-0xfaffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4153, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e8000000, size 27, enabled
pcib1: (null) requested memory range 0xe8000000-0xefffffff: good
map[14]: type 4, range 32, base 0000e000, size 8, enabled
pcib1: (null) requested I/O range 0xe000-0xe0ff: in range
map[18]: type 1, range 32, base fbe00000, size 16, enabled
pcib1: (null) requested memory range 0xfbe00000-0xfbe0ffff: good
pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKA:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.LNKA
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x1002, dev=0x4173, revid=0x00
bus=1, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f0000000, size 27, enabled
pcib1: (null) requested memory range 0xf0000000-0xf7ffffff: good
map[14]: type 1, range 32, base fbf00000, size 16, enabled
pcib1: (null) requested memory range 0xfbf00000-0xfbf0ffff: good
drm0: <ATI Radeon AS 9600 AS> port 0xe000-0xe0ff mem 0xe8000000-0xefffffff,0xfbe00000-0xfbe0ffff irq 11 at device 0.0 on pci1
drm0: Reserved 0x10000 bytes for rid 0x18 type 3 at 0xfbe00000
pcib1: drm0 requested memory range 0xfbe00000-0xfbe0ffff: good
pcib1: drm0 requested memory range 0xfbe00000-0xfbe0ffff: good
drm0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000
pcib1: drm0 requested memory range 0xe8000000-0xefffffff: good
pcib1: drm0 requested memory range 0xe8000000-0xefffffff: good
info: [drm] AGP at 0xe4000000 64MB
info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
pci1: <display> at device 0.1 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0xd800-0xd87f mem 0xfbc00000-0xfbc007ff irq 11 at device 7.0 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfbc00000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:cb:93:55
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
bktr0: <BrookTree 878> mem 0xe3e00000-0xe3e00fff irq 11 at device 9.0 on pci0
bktr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe3e00000
bktr0: [GIANT-LOCKED]
brooktree0: PCI bus latency is 64.
bktr0: buffer size 3555328, addr 0x3a000000
bktr0: GPIO is 0x00ffffdb
bktr0: subsystem 0x0070 0x13eb
bktr0: Hauppauge Model 44811 C333
bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner.
pci0: <multimedia> at device 9.1 (no driver attached)
pci0:9:1: Transition from D0 to D3
skc0: <Marvell Gigabit Ethernet> port 0xd400-0xd4ff mem 0xfbb00000-0xfbb03fff irq 10 at device 10.0 on pci0
skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfbb00000
skc0: interrupt moderation is 100 us
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
skc0: PN: Yukon 88E8001
skc0: EC: Rev. 1.3
skc0: MN: Marvell
skc0: SN: AbCdEfG334454
skc0: chip ver = 0xb1
skc0: chip rev = 0x09
skc0: SK_EPROM0 = 0x10
skc0: SRAM size = 0x010000
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: bpf attached
sk0: Ethernet address: 00:11:d8:44:15:f4
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [MPSAFE]
atapci0: <VIA 6420 SATA150 controller> port 0xd000-0xd007,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xb800-0xb80f,0xb400-0xb4ff irq 10 at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb800
atapci0: [MPSAFE]
atapci0: Reserved 0x100 bytes for rid 0x24 type 4 at 0xb400
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd000
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc800
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc400
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc000
ata3: SATA connect status=00000000
ata3: [MPSAFE]
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=51 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 11 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa000
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 11 at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa400
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 10 at device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 10 at device 16.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfb800000-0xfb8000ff irq 5 at device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfb800000
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: VIA Technologies Inc. Mitsumi multi cardreader, rev 2.00/0.03, addr 2
umass0:0:0:-1: Attached to scbus0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0x9800-0x98ff irq 5 at device 17.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9800
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC850 AC97 Codec (id = 0x414c4790)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: sndbuf_setmap 3e542000, 1000; 0xc24ce000 -> 3e542000
pcm0: sndbuf_setmap 3e724000, 1000; 0xc24d0000 -> 3e724000
pcm0: sndbuf_setmap 3e526000, 1000; 0xc24d2000 -> 3e526000
pcm0: sndbuf_setmap 3db68000, 1000; 0xc24f4000 -> 3db68000
pcm0: sndbuf_setmap 3e4e6000, 1000; 0xc24f2000 -> 3e4e6000
pcm0: sndbuf_setmap 3e6e4000, 1000; 0xc24f0000 -> 3e6e4000
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd3fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Device configuration finished.
linprocfs registered
procfs registered
Timecounter "TSC" frequency 2655145140 Hz quality 800
Timecounters tick every 0.862 msec
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
atapicam: atapicam0 already exists; skipping it
pid 25: corrected slot count (0->1)
ad0: setting PIO4 on VIA 8237 chip
ad0: setting UDMA100 on VIA 8237 chip
ad0: 19541MB <Maxtor 2B020H1 WAH21PB0> at ata0-master UDMA100
ad0: 40020624 sectors [39703C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acd0: setting PIO4 on VIA 8237 chip
acd0: setting UDMA33 on VIA 8237 chip
acd0: <HL-DT-ST DVDRAM GSA-4163B/A104> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 76319MB <Seagate ST380817AS 3.42> at ata2-master SATA150
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: VIA check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
GEOM: new disk ad0
GEOM: new disk ad4
(probe1:ata1:0:0:0): error 22
(probe1:ata1:0:0:0): Unretryable Error
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): error 5
(probe0:umass-sim0:0:0:0): Retries Exausted
pass0 at ata1 bus 0 target 0 lun 0
pass0: <HL-DT-ST DVDRAM GSA-4163B A104> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
ATA PseudoRAID loaded
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4163B A104> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad4s2a
start_init: trying /sbin/init
sk0: link state changed to UP
-------------- next part --------------
agp0 at pci0:0:0: class=0x060000 card=0x80a31043 chip=0x02821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb0 at pci0:0:1: class=0x060000 card=0x00000000 chip=0x12821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb1 at pci0:0:2: class=0x060000 card=0x00000000 chip=0x22821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb2 at pci0:0:3: class=0x060000 card=0x00000000 chip=0x32821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb3 at pci0:0:4: class=0x060000 card=0x00000000 chip=0x42821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb4 at pci0:0:7: class=0x060000 card=0x00000000 chip=0x72821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1881106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'Apollo K8HTB CPU to AGP 2.0/3.0 Bridge'
class = bridge
subclass = PCI-PCI
fwohci0 at pci0:7:0: class=0x0c0010 card=0x808a1043 chip=0x30441106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller'
class = serial bus
subclass = FireWire
bktr0 at pci0:9:0: class=0x040000 card=0x13eb0070 chip=0x036e109e rev=0x11 hdr=0x00
vendor = 'Brooktree Corporation'
device = 'Bt878 Mediastream Controller'
class = multimedia
subclass = video
none0 at pci0:9:1: class=0x048000 card=0x13eb0070 chip=0x0878109e rev=0x11 hdr=0x00
vendor = 'Brooktree Corporation'
device = 'Bt878/Fusion878A Video Capture (Audio Section)'
class = multimedia
skc0 at pci0:10:0: class=0x020000 card=0x811a1043 chip=0x432011ab rev=0x13 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = '88E8001/8003/8010 Gigabit Ethernet Controller with Integrated PHY (copper)'
class = network
subclass = ethernet
atapci0 at pci0:15:0: class=0x010400 card=0x80ed1043 chip=0x31491106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237 VT6410 SATA RAID Controller'
class = mass storage
subclass = RAID
atapci1 at pci0:15:1: class=0x01018a card=0x80ed1043 chip=0x05711106 rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
uhci0 at pci0:16:0: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci1 at pci0:16:1: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci2 at pci0:16:2: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci3 at pci0:16:3: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
ehci0 at pci0:16:4: class=0x0c0320 card=0x80ed1043 chip=0x31041106 rev=0x86 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6202 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
isab0 at pci0:17:0: class=0x060100 card=0x80ed1043 chip=0x32271106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237 PCI-to-ISA Bridge'
class = bridge
subclass = PCI-ISA
pcm0 at pci0:17:5: class=0x040100 card=0x812a1043 chip=0x30591106 rev=0x60 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
class = multimedia
subclass = audio
hostb5 at pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb6 at pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb7 at pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb8 at pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
drm0 at pci1:0:0: class=0x030000 card=0x00901043 chip=0x41531002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV350 Radeon 9550'
class = display
subclass = VGA
none1 at pci1:0:1: class=0x038000 card=0x00911043 chip=0x41731002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV350 Radeon 9550 - Secondary'
class = display
More information about the freebsd-current
mailing list