[Fwd: cvs commit: src/sys/modules Makefile src/sys/conf files src/sys/modules/ath_rate_sample Makefile src/sys/i386/conf NOTES]

[Eric Anderson]

Alexandre "Sunny" Kovalenko wrote:
> On Thu, 2005-03-10 at 21:54 -0800, Sam Leffler wrote:
> 
>>If you''re an ath user on current it'd be great to get John some 
>>feedback on his rate control algorithm as it might be made the default. 
>>  I've not tested it with 5210 or 5211 cards and it's likely to have 
>>some issues with them so beware.  To use it be sure you have up to date 
>>code and then specify
>>
>>device	ath_rate_sample
>>
>>instead of the normal ath_rate_onoe.
>>
>>	Sam
>>
>>-------- Original Message --------
>>Subject: cvs commit: src/sys/modules Makefile src/sys/conf files 
>>  src/sys/dev/ath/ath_rate/sample sample.c sample.h 
>>src/sys/modules/ath_rate_sample Makefile src/sys/i386/conf NOTES
>>Date: Fri, 11 Mar 2005 01:39:57 +0000 (UTC)
>>From: Sam Leffler <sam at FreeBSD.org>
>>To: src-committers at FreeBSD.org, cvs-src at FreeBSD.org, cvs-all at FreeBSD.org
>>
>>sam         2005-03-11 01:39:57 UTC
>>
>>   FreeBSD src repository
>>
>>   Modified files:
>>     sys/modules          Makefile
>>     sys/conf             files
>>     sys/i386/conf        NOTES
>>   Added files:
>>     sys/dev/ath/ath_rate/sample sample.c sample.h
>>     sys/modules/ath_rate_sample Makefile
>>   Log:
>>   SampleRate rate control algorithm for the ath driver
>>
>>   Submitted by:   John Bicket
>>
>>   Revision  Changes    Path
>>   1.1003    +1 -0      src/sys/conf/files
>>http://cvsweb.FreeBSD.org/src/sys/conf/files.diff?r1=1.1002&r2=1.1003
>>   1.1       +608 -0    src/sys/dev/ath/ath_rate/sample/sample.c (new)
>>http://cvsweb.FreeBSD.org/src/sys/dev/ath/ath_rate/sample/sample.c?rev=1.1&content-type=text/plain
>>   1.1       +136 -0    src/sys/dev/ath/ath_rate/sample/sample.h (new)
>>http://cvsweb.FreeBSD.org/src/sys/dev/ath/ath_rate/sample/sample.h?rev=1.1&content-type=text/plain
>>   1.1188    +1 -0      src/sys/i386/conf/NOTES
>>http://cvsweb.FreeBSD.org/src/sys/i386/conf/NOTES.diff?r1=1.1187&r2=1.1188
>>   1.430     +1 -0      src/sys/modules/Makefile
>>http://cvsweb.FreeBSD.org/src/sys/modules/Makefile.diff?r1=1.429&r2=1.430
>>   1.1       +48 -0     src/sys/modules/ath_rate_sample/Makefile (new)
>>http://cvsweb.FreeBSD.org/src/sys/modules/ath_rate_sample/Makefile?rev=1.1&content-type=text/plain
>>
>>
>>_______________________________________________
>>freebsd-current at freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>>To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
> 
> 
> At the moment, I could not load ath_rate.ko built
> from /usr/src/sys/modules/ath_rate_sample. Both _amrr and _onoe work
> fine as modules. Error message I get from 
> 
> 	kldload ath_rate
> 
> is as follows: 
> 
> 	link_elf: symbol ath_hal_computetxtime undefined.
> 
> I am running -CURRENT as of ~9:30AM EST today (March 11). Atheros part
> is PCMCIA Linksys WPC55AG (AR5212).
> 
> Will be building ath_rate_sample into the kernel next. 


The patch by Tai-hwa Liang fixes the issue.

Eric



-- 
------------------------------------------------------------------------
Eric Anderson        Sr. Systems Administrator        Centaur Technology
I have seen the future and it is just like the present, only longer.
------------------------------------------------------------------------