Timekeeping hosed by factor 3, high lapic[01] interrupt rates
KAYVEN RIESE
kayve at sfsu.edu
Fri Jun 24 22:47:18 GMT 2005
i shouldn't have done this. my clock is wrong
Path: /home/kayve
(kayve at kayvetop) 101> vmsat -i
Whoops>vmstat -i (ynea)? yes
interrupt total rate
irq0: clk 11619316 999
irq1: atkbd0 35733 3
irq4: cbb0 bge0 164070 14
irq7: ppc0 1 0
irq8: rtc 1487453 127
irq9: acpi0 237 0
irq10: fwohci0++ 2 0
irq11: cbb1 uhci0 98691 8
irq13: npx0 1 0
irq14: ata0 32813 2
irq15: ata1 48 0
Total 13438365 1156
Path: /home/kayve
(kayve at kayvetop) 102>
On Sat, 25 Jun 2005, Jens Schweikhardt wrote:
> John et al,
>
> On Fri, Jun 24, 2005 at 03:28:42PM -0400, John Baldwin wrote:
> # On Friday 24 June 2005 01:53 pm, John Baldwin wrote:
> # > On Friday 24 June 2005 12:50 pm, Jens Schweikhardt wrote:
> # > > On Thu, Jun 23, 2005 at 05:14:39PM -0400, John Baldwin wrote:
> # > > ...
> # > > # Ok. What timecounter does your UP kernel use, and does your UP kernel
> # > > break # if you change the timecounter to i8254?
> # > >
> # > > The UP uses the TSC:
> # > > $ sysctl -a|grep timec
> # > > kern.timecounter.stepwarnings: 0
> # > > kern.timecounter.nbinuptime: 136311
> # > > kern.timecounter.nnanouptime: 0
> # > > kern.timecounter.nmicrouptime: 664
> # > > kern.timecounter.nbintime: 1273
> # > > kern.timecounter.nnanotime: 36
> # > > kern.timecounter.nmicrotime: 1237
> # > > kern.timecounter.ngetbinuptime: 405
> # > > kern.timecounter.ngetnanouptime: 29
> # > > kern.timecounter.ngetmicrouptime: 2534
> # > > kern.timecounter.ngetbintime: 0
> # > > kern.timecounter.ngetnanotime: 0
> # > > kern.timecounter.ngetmicrotime: 5
> # > > kern.timecounter.nsetclock: 2
> # > > kern.timecounter.hardware: TSC
> # > > kern.timecounter.choice: TSC(800) i8254(0) dummy(-1000000)
> # > > kern.timecounter.tick: 1
> # > > kern.timecounter.smp_tsc: 0
> # > >
> # > > When I do
> # > >
> # > > $ sysctl kern.timecounter.hardware=i8254
> # > >
> # > > on the UP the time dilation by factor 3 starts and the lapic rate
> # > > increases. So yes, that breaks the UP kernel.
> # >
> # > Ok. Can you try this untested patch? It's mostly from phk and I haven't
> # > yet tested it locally to make sure it doesn't break things:
> #
> # Scratch that.
>
> (This patch made time advance with 11-fold speed, lapic rates about 170...
> interesting effects happen then ;-)
>
> # I've reproduced this locally now on a testbox I have and had to
> # add a bugfix from phk to get it to work. Here's the patch that works for me:
>
> Sorry, does not work here; still time dilation in sleep 1 (MP case, no
> sysctl kern.timecounter.hardware frobs):
>
> $ vmstat -i
> interrupt total rate
> irq1: atkbd0 455 9
> irq13: npx0 1 0
> irq14: ata0 63 1
> irq15: ata1 109 2
> irq18: em0 15 0
> irq24: ahd0 4529 96
> irq25: ahc0 16 0
> lapic0: timer 272712 5802
> lapic1: timer 258021 5489
> Total 535921 11402
>
> Regards,
>
> Jens
> --
> Jens Schweikhardt http://www.schweikhardt.net/
> SIGSIG -- signature too long (core dumped)
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>
More information about the freebsd-current
mailing list